The influence of hydroelectric power generation on the body composition of juvenile Atlantic salmon

The fat and protein content, and thus energy resources of young (parr) Atlantic salmon (Salmo salar) were examined in a temperate river. Juvenile salmon exhibited distinct seasonal patterns of energy storage and use. The lowest levels of energy were found towards the end of winter (mean mass specific energy about 4.3 kJ·g^?1). There was a rapid accumulation of fat in spring/early summer in spite of low‐water temperatures (highest mean content of mass specific energy of about 5.0 kJ·g^?1 in June). By early autumn (August) there was a rapid depletion of fat and energy resources. The decline in specific energy during late summer was of the same magnitude as the corresponding winter decline. Furthermore, total fat and protein content, and thus energy resources of juveniles below a hydroelectric power plant (hydrostation (HS)) differed from those at a (lower) reference station (RS). The younger fish exhibited higher gains, but also larger losses of energy resources compared to corresponding values at the RS. Specifically during the summer, young of year (YOY) had 31% lower total energy content at the regulated site (mean 1.27 kJ per individual) than the RS (mean 1.84 kJ). Higher mortality may occur at the site most affected by the hydroelectric plant, where energy resources on average were higher, but where depletion was also most severe. Copyright © 2006 John Wiley & Sons, Ltd.     

Integrated methodology for forensic oil spill identification

A new integrated methodology for forensic oil spill identification is presented. It consists of GC-MS analysis, chromatographic data processing, variable-outlier detection, multivariate data analysis, estimation of uncertainties, and statistical evaluation. The methodology was tested on four groups of diagnostic ratios composed of petroleum biomarkers and ratios within homologous PAH categories. Principal component analysis (PCA) was employed and enabled the simultaneous analysis of many diagnostic ratios. Weathering was taken into account by considering the sampling uncertainties estimated from replicate spill samples. Statistical evaluation ensured an objective matching of oil spill samples with suspected source oils as well as classification into positive match, probable match, and nonmatch. The data analysis is further refined if two or more source oils are classified as probable match by using weighted least squares fitting of the principal components, local PCA models, and additional information relevant to the spill case. The methodology correctly identified the source of two spill samples (i.e., crude oils from Oseberg East and Oseberg Field Centre) and distinguished them from closely related source oils.     

Exploring the Biomaterial-Induced Secretome: Physical Bone Substitute Characteristics Influence the Cytokine Expression of Macrophages

In addition to their chemical composition various physical properties of synthetic bone substitute materials have been shown to influence their regenerative potential and to influence the expression of cytokines produced by monocytes, the key cell-type responsible for tissue reaction to biomaterials in vivo. In the present study both the regenerative potential and the inflammatory response to five bone substitute materials all based on β-tricalcium phosphate (β-TCP), but which differed in their physical characteristics (i.e., granule size, granule shape and porosity) were analyzed for their effects on monocyte cytokine expression. To determine the effects of the physical characteristics of the different materials, the proliferation of primary human osteoblasts growing on the materials was analyzed. To determine the immunogenic effects of the different materials on human peripheral blood monocytes, cells cultured on the materials were evaluated for the expression of 14 pro- and anti-inflammatory cytokines, i.e., IL-6, IL-10, IL-1β, VEGF, RANTES, IL-12p40, I-CAM, IL-4, V-CAM, TNF-α, GM-CSF, MIP-1α, Il-8 and MCP-1 using a Bio-Plex^® Multiplex System. The granular shape of bone substitutes showed a significant influence on the osteoblast proliferation. Moreover, smaller pore sizes, round granular shape and larger granule size increased the expression of GM-CSF, RANTES, IL-10 and IL-12 by monocytes, while polygonal shape and the larger pore sizes increased the expression of V-CAM. The physical characteristics of a bone biomaterial can influence the proliferation rate of osteoblasts and has an influence on the cytokine gene expression of monocytes in vitro. These results indicate that the physical structure of a biomaterial has a significant effect of how cells interact with the material. Thus, specific characteristics of a material may strongly affect the regenerative potential in vivo.     

Melting behavior of polypropylene fibers studied by differential scanning calorimetry

Polypropylene fibers produced in a compact-spinning process were studied by differential scanning calorimetry (DSC). With unrestrained fibers, the onset of melting increases with decreasing draw ratio, increasing M_w/M_n, decreasing extrusion temperature, increasing annealing ratio, and increasing draw-down ratio. These trends are discussed in terms of restraints and reorganization. The onset of melting is shifted to lower temperatures as the heating rate increases for all combinations of material and processing parameters, indicating suppressed reorganization. At low draw ratios, the height and width of the endotherm are affected by the spinline stress, and a secondary peak or shoulder is observed on the high temperature side of the main peak. The magnitude of the secondary peak increases with decreasing M_w/M_n, increasing draw ratio, decreasing draw-down ratio, and decreasing heating rate, but its position mainly depends on the heating rate. This indicates that the secondary peak may be due to the melting of structures that have been reorganized during the heating scan. As the draw ratio increases, the melting regime broadens, especially towards lower temperatures, and several maxima emerge on the DSC curve. Reorganization and shrinkage during heating may explain these observations. © 1995 John Wiley & Sons, Inc.     

From Artefacts to Infrastructures

In their initial articulation of the direction of the CSCW field, scholars advanced an open-ended agenda. This continuing commitment to open-ness to different contexts and approaches is not, however, reflected in the contents of the major CSCW outlets. The field appears to privilege particular forms of cooperative work. We find many examples of what could be described as ‘localist studies’, restricted to particular settings and timeframes. This focus on the ‘here and now’ is particularly problematic when one considers the kinds of large-scale, integrated and interconnected workplace information technologies—or what we are calling Information Infrastructures—increasingly found within and across organisations today. CSCW appears unable (or unwilling) to grapple with these technologies—which were at the outset envisaged as falling within the scope of the field. Our paper hopes to facilitate greater CSCW attention to Information Infrastructures through offering a re-conceptualisation of the role and nature of ‘design’. Design within an Information Infrastructures perspective needs to accommodate non-local constraints. We discuss two such forms of constraint: standardisation (how local fitting entails unfitting at other sites) and embeddedness (the entanglement of one technology with other apparently unrelated ones). We illustrate these themes through introducing case material drawn on from a number of previous studies.     

Suspension system performance optimization with discrete design variables

Suspension systems on commercial vehicles have become an important feature meeting the requirements from costumers and legislation. The performance of the suspension system is often limited by available catalogue components. Additionally the suspension performance is restricted by the travel speed which highly influences the ride comfort. In this article a suspension system for an articulated dump truck is optimized in sense of reducing elapsed time for two specified duty cycles without violating a certain comfort threshold level. The comfort threshold level is here defined as a whole-body vibration level calculated by ISO 2631-1. A three-dimensional multibody dynamics simulation model is applied to evaluate the suspension performance. A non-gradient optimization routine is used to find the best possible combination of continuous and discrete design variables including the optimum operational speed without violating a set of side constraints. The result shows that the comfort level converges to the comfort threshold level. Thus it is shown that the operational speed and hence the operator input influences the ride comfort level. Three catalogue components are identified by the optimization routine together with a set of continuous design variables and two operational speeds one for each load case. Thus the work demonstrates handling of human factors in optimization of a mechanical system with discrete and continuous design variables.     

熔盐电解精炼提纯金属硅(英文)

对熔盐电解质中硅的沉积过程进行电化学研究。在 973~223K,在硅氯化物熔盐中采用电解精炼提纯金属硅。结果表明,液态硅铜合金阳极有利于 CaCl2-NaCl-CaO-Si 熔盐体系的电解精炼。ICP-AES 分析结果显示,通过电解精炼可有效去除原料中大量的钛、铝、铁等金属杂质,硅中的硼和磷含量分别由 36×106和 25×106降低至 4.6×10 6和 2.8×10 6,电解能耗约为 9.3 kW·h/kg。     

Interactive topology optimization on hand-held devices

This paper presents an interactive topology optimization application designed for hand-held devices running iOS or Android. The TopOpt app solves the 2D minimum compliance problem with interactive control of load and support positions as well as volume fraction. Thus, it is possible to change the problem settings on the fly and watch the design evolve to a new optimum in real time. The use of an interactive app makes it extremely simple to learn and understand the influence of load-directions, support conditions and volume fraction. The topology optimization kernel is written in C# and the graphical user interface is developed using the game engine Unity3D. The underlying code is inspired by the publicly available 88 and 99 line Matlab codes for topology optimization but does not utilize any low-level linear algebra routines such as BLAS or LAPACK. The TopOpt App can be downloaded on iOS devices from the Apple App Store, at Google Play for the Android platform, and a web-version can be run from www.topopt.dtu.dk.     

Autogenous deformation and RH-change in perspective

Autogenous deformation and change of the relative humidity (RH-change) have been described and registered for a century. However, it is only within the last decade that these phenomena have received appreciable attention. The reason for this is that autogenous deformation and autogenous RH-change are phenomena of special importance within high-strength (high-performance) concrete technology, and a significant utilisation of these concretes did not take place until the early 1980s. In the present paper an historical overview of autogenous deformation and RH-change is given. In addition, due to the present status of this research field both terminology and measuring techniques are described in detail. Finally, some expectations for future research in this field are given.