Optimization of material structure of ploy-Si thin film based on Al induced crystallization

Based on Al induced crystallization (AIC) method, influences of different material structures on formation and characteristics of ploy-silicon thin films were studied and optimized. Al-Si films on glass with different structures (Si/Al/Glass, Al/Si/Glass, Si/Al/…/Si/Al/Glass) were deposited on glass substrates by sputtering method. All samples were annealed for MIC with varied time processes under 500℃ N2 environment. X-ray diffraction test and scanning electron microscope were adopted to characterize cryst...     

Hybrids perfluorosulfonic acid ionomer and silicon oxide membrane for application in ion-exchange polymer-metal composite actuators

This paper reports a new technique to fabricate an ion-exchange polymer-metal composite (IPMC) actuator. This technique is based on a hybrid organic-inorganic composite membrane. In the fabrication course, silica oxide particles, prepared from hydrolysis of tetraethyl orthosilicate in situ with sol-gel reaction, co-crystallize with perfluorosulfonate acid (PFSA) ionomer. Attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR) analyses demonstrate that a highly water-saving hybrid mem...     

Flux pinning effect of cubic equiaxed morphology and its Ti stabilizing in Nb<Subscript>3</Subscript>Sn superconductors

Two sets of internal-Sn Nb3Sn superconducting strands were fabricated through RRP method, one with 2 wt% of Ti alloyed in Sn core and the other just pure Sn. Four reaction temperatures of 650℃, 675℃, 700℃ and 725℃ and 128 h duration were applied for A15 phase formation heat treatment after Cu-Sn alloying procedure of 210℃/50 h + 340℃/25 h. For the heat-treated coil samples, transport non-Cu JC was examined through standard 4-probe technique and phase microstructure was observed by means of Field Emission Sc...     

Restraint of mid-spatial frequency error in magneto-rheological finishing (MRF) process by maximum entropy method

In order to restrain the mid-spatial frequency error in magnetorheological finishing (MRF) process, a novel part-random path is designed based on the theory of maximum entropy method (MEM). Using KDMRF-1000F polishing machine, one flat work piece (98 mm in diameter) is polished. The mid-spatial frequency error in the region using part-random path is much lower than that by using common raster path. After one MRF iteration (7.46 min), peak-to-valley (PV) is 0.062 wave (1 wave =632.8 nm), root-mean-square (RM...     

Research on indoor experimentation of range SAL imaging system

By means of advantages of both SAR and lidar, the combination of the techniques of (inverse) synthetic aperture and lidar makes it possible to obtain high resolution 2-D image. In this paper, an indoor experimental system of inverse synthetic aperture lidar imaging is given and a processing approach is presented. The given system is in the mode of lidar system with separated receiver and transmitter, which can effectively eliminate the jamming from the lens or/and the intersection between two optic fibers. ...     

Gearbox fault diagnosis of rolling mills using multiwavelet sliding window neighboring coefficient denoising and optimal blind deconvolution

Fault diagnosis of rolling mills, especially the main drive gearbox, is of great importance to the high quality products and long-term safe operation. However, the useful fault information is usually submerged in heavy background noise under the severe condition. Thereby, a novel method based on multiwavelet sliding window neighboring coefficient denoising and optimal blind deconvolution is proposed for gearbox fault diagnosis in rolling mills. The emerging multiwavelets can seize the important signal proce...     

Growth of Ag nanocrystals on multiwalled carbon nanotubes and Ag-carbon nanotube interaction

The experimental investigations on the interaction between Ag-nanocrystal particles (Ag-NCPs) and carbon nanotubes (CNTs) in Ag-nanocrystal particles/carbon nanotubes (Ag-NCPs/CNTs) hybrid structures were reported. The growth of Ag-NCPs on multiwalled carbon nanotubes (MWCNTs) was carried out by thermal evaporation deposition. High-resolution transmission electron microscopy and X-ray diffraction analyses revealed that Ag-NCPs had the crystal lattice feature of face-centered cube (fcc). The growth of Ag-NCPs on MWCNTs induced the cross-section deformation of MWCNT. The experimental results also showed that the synthesized Ag-NCPs/CNTs hybrid structure appeared as quasi-one dimensional nanowires containing the Ag-NCP/CNT hetero-junction. There was local cross-section deformation on MWCNTs at the interface of hetero-junction. These results involve the important topic about fundamental and practical studies for structure of MNCPs on CNTs and also find clues to further research of Ag nanocrystal growing on MWCNTs and related Ag-CNT interaction.     

Composite silicone rubber of high piezoresistance repeatability filled with nanoparticles

The ruthenium oxide nanoparticles with size less than 20 nm were fabricated by annealing the metallic ruthenium nanoparticles in air, which were synthesized by using the thermal reduction in the polyol solution. The rutile structure of the ruthenium oxide was proved by using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The oxide has good electron conductivity. The surface of the ruthenium oxide was modified by a vinyl silane coupling agent. The assembling of the silane to the oxide surface was proved by Infrared (IR) absorption spectroscopy. By mixing the nanoparticles with poly(methylvinylsiloxane) (PMVS) silicone rubber, a composite filled with dispersive conducting phase was fabricated. The temperature dependent conductivity shows that the electron transportation through composite is mainly dominated by tunneling. The measurement of piezoresistance shows that the composite at low strain has high piezoresistance repeatability. The 3D reconstruction images of the composite filled with carbon black or ruthenium oxide show that the aggregation of the nanoparticles differs much for two composites. The narrow distribution range of the particle size was thought to be the main factor for the high piezoresistance recurrence.     

A physically-based integrated numerical model for flow,upland erosion,and contaminant transport in surface-subsurface systems

This paper presents a physically-based integrated hydrologic model that can simulate the rainfall-induced 2D surface water flow, 3D variably saturated subsurface flow, upland soil erosion and transport, and contaminant transport in the surface-subsurface system of a watershed. The model couples surface and subsurface flows based on the assumption of continuity conditions of pressure head and exchange flux at the ground, considering infiltration and evapotranspiration. The upland rill/interrill soil erosion and transport are simulated using a non-equilibrium transport model. Contaminant transport in the integrated surface and subsurface domains is simulated using advection-diffusion equations with mass changes due to sediment sorption and desorption and exchanges between two domains due to infiltration, diffusion, and bed change. The model requires no special treatments at the interface of upland areas and streams and is suitable for wetland areas and agricultural watersheds with shallow streams.     

Precision forming machine with rolling plate cross wedge rolling

Roller cross wedge rolling (CWR) machines have high rigidity, but sector dies are difficult to process. Plate CWR machines have low rigidity and need large floor space, but plate dies are easy to process. Neither roller CWR machine nor plate CWR machine can produce larger workpieces. Based on the above conclusions, this paper presents the mechanical principle of the precision forming machine with rolling plate CWR. Then, its design principle and machine construction are presented. There are a top press roller above the upper sliding plate and a bottom press roller under the lower sliding plate. The press rollers make rolling contact with the sliding plates. The plate dies are mounted on the upper and lower sliding plates, respectively. Furthermore, the axes of both press rollers and centerline of workpiece always keep in the identical vertical plane during forming process. These make the machine retain advantages of high rigidity for roller CWR machine and simpleness of manufacturing dies for plate CWR machine, and abandon defects of poor rigidity for plate CWR machine and difficulty of manufacturing dies for roller CWR machine. Moreover, the machine can produce larger workpieces.