Development of an Event Stream Processing System for the Vehicle Telematics Environment

In this letter, we present an event stream processing system that can evaluate a pattern query for a data sequence with predicates. We propose a pattern query language and develop a pattern query processing system. In our system, we propose novel techniques for run‐time aggregation and negation processing and apply our system to stream data generated from vehicles to monitor unusual driving patterns.     

Tiered bandwidth reservation scheme for multimedia wireless networks

It is important to provide quality of service (QoS) guarantees if we want to support multimedia applications over wireless networks. In this paper, considering the features of tiering in sectored cellular networks, we propose a novel scheme for bandwidth reservation to approach QoS provisioning. By predicting the movement of each connection, the reserving of bandwidth is only required in needful neighboring cells instead of in all neighboring cells. In addition, an admission control mechanism incorporated with bandwidth borrowing assists in distributing scarce wireless bandwidth in more adaptive way. Through mathematical analysis, we proof the advantages of tier‐based approach and the bound for the selection of tiered boundary. The simulation results also verify that our scheme can achieve superior performance than traditional schemes regarding no bandwidth reserving, fixed bandwidth reserving, and bandwidth borrowing in sectored cellular networks when performance metrics are measured in terms of the connection dropping probability (CDP), connection blocking probability (CBP), and bandwidth utilization (BU). Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐Enhanced Raman Scattering Using Microstructured Optical Fiber Substrates

Microstructured optical fibers (MOFs) represent a promising platform technology for fully integrated next generation surface enhanced Raman scattering (SERS) sensors and plasmonic devices. In this paper we demonstrate silver nanoparticle substrates for SERS detection within MOF templates with exceptional temporal and mechanical stability, using organometallic precursors and a high‐pressure chemical deposition technique. These 3D substrates offer significant benefits over conventional planar detection geometries, with the long electromagnetic interaction lengths of the optical guided fiber modes exciting multiple plasmon resonances along the fiber. The large Raman response detected when analyte molecules are infiltrated within the structures can be directly related to the deposition profile of the nanoparticles within the MOFs via electrical characterization.     

Encapsulation of Nanoparticles Using Nitrilotriacetic Acid End‐Functionalized Polystyrenes and Their Application for the Separation of Proteins

The use of nitrilotriacetic acid end‐functionalized polystyrenes (NTA‐PS) as a multifunctional nanocarrier for the aqueous dispersion of CdSe, γ‐Fe₂O₃ and gold nanoparticles (NPs) is described. When the amphiphilic end‐ functionalized polystyrenes and NPs are dissolved together in tetrahydrofuran, the addition of water causes the spontaneous formation of micellar aggregates, resulting in the successful encapsulation and aqueous dispersion of NPs. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy, and vibrating sample magnetometer (VSM) are used to characterize the structure and properties of the NPs‐containing micellar aggregates (nanocarrier). After complexation of Ni²⁺ with NTA on the surface of the nanocarrier containing γ‐Fe₂O₃, specific binding between Ni‐NTA complex and histidine‐tagged (His‐tagged) proteins enables selective separation of His‐tagged proteins using a magnet.     

Cold isostatic pressing technique for producing highly efficient flexible dye‐sensitised solar cells on plastic substrates

One of the biggest challenges for making dye‐sensitised solar cells (DSCs) on plastic substrates is the difficulty in making good quality nanoporous TiO₂ films with both good mechanical stability and high electrical conductivity. Cold isostatic pressing (CIP) is a powder compaction technique that applies an isostatic pressure to a powder sample in all directions. It is particularly suitable for making thin films on plastic substrates, including non‐flat surfaces. Cold isostatically pressed nanocrystalline TiO₂ electrodes with excellent mechanical robustness were prepared on indium tin oxide (ITO)‐coated polyethylene naphthalate (PEN) substrates in the absence of organic binders and without heat treatment. The morphology and the physical properties of the TiO₂ films prepared by the CIP method were found to be very compatible with requirements for flexible DSCs on plastics. This room‐temperature processing technique has led to an important technical breakthrough in producing high efficiency flexible DSCs. Devices fabricated on ITO/PEN films by this method using standard P‐25 TiO₂ films with a Ru‐complex sensitiser yielded a maximum incident photon‐to‐current conversion efficiency of 72% at the wavelength of 530 nm and showed high conversion efficiencies of 6.3% and 7.4% for incident light intensities of 100 and 15 mW cm⁻², respectively, which are the highest power conversion efficiencies achieved so far for any DSC on a polymer substrate using the widely used, commercially available P‐25 TiO₂ powder. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance of FCCI barrier foils for U-Zr-X metallic fuel

Diffusion couple tests of U-Zr or U-Zr-Ce alloys vs. ferritic martensitic steels such as HT9 or T91 were carried out in order to evaluate the performance of the diffusion barrier candidates. Elemental metal foils of Zr, Nb, Ti, Mo, Ta, V and Cr were very effective in inhibiting interdiffusion between these fuels and steels. Eutectic melting between the fuels and steels was not observed in any of the diffusion couples using these diffusion barrier foils at annealing temperatures up to 800 °C. Among the metallic foils evaluated in this study, V and Cr exhibited the most promising performances as a diffusion barrier material for eliminating the fuel cladding chemical interaction problem. However, Zr, Nb and Ti showed an active interaction with the fuel mainly due to the large U solubility.     

Sn self-doped α-Fe2O3 nanobranch arrays supported on a transparent,conductive SnO2 trunk to improve photoelectrochemical water oxidation

We produced hierarchically branched Fe₂O₃ nanorods on a Sb:SnO₂ transparent conducting oxide (TCO) nanobelt structure as photoanodes for photoelectrochemical water splitting. Single-crystalline SnO₂ nanobelts (NBs) surrounded by Fe₂O₃ nanorods (NRs) were synthesized by thermal evaporation, then underwent chemical bath deposition and annealing. When Fe₂O₃ was crystallized by annealing, Sn was diffused from SnO₂ NBs and incorporated to Fe₂O₃ NRs, which was confirmed through Energy dispersive spectroscopy. Unlike previous high temperature sintering (∼800 °C), Sn doped hematite NRs were obtained at a low temperature (∼650 °C). This occurred since SnO₂ NBs directly connected to Fe₂O₃ NRs are an abundant source of Sn dopant. The 3D hematite NRs on SnO₂ NBs annealed at 650 °C produce a photocurrent density of 0.88 mA/cm² at 1.23 V vs. RHE, which is 3 times higher than that of hematite NRs on a fluorine doped tin oxide (FTO) glass substrate annealed at the same temperature. The enhanced photocurrent is attributed to the improved electrical conductivity of Fe₂O₃ NRs by Sn doping, the efficient electron transport pathway by TCO nanowire and the increased surface area by hierarchically branched structure.     

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals have been carried out using a quasi‐relativistic density‐functional method. The metal surface is simulated by a M₁₀ cluster model. Reaction energies for the elementary steps involved are determined. The activation energies are estimated by the analytic BOC‐MP formula. The results support that these metals are active in CO hydrogenation to methanol. The rate‐determining steps are shown to be different for the metals. The highest activation energies of reaction on the metals fall in the order Cu < Pd < Pt, which corresponds to the order of the catalytic activities of the metals in CO hydrogenation. This revised version was published online in July 2006 with corrections to the Cover Date.