Photolithography of amorphous films of (η5-C5H5)2Ti(N3)2 on silicon (111) resulting in TiO2: The mechanism of the photodeposition reaction

Photolithography to produce TiO₂ patterns from amorphous films of (⁵-C₅H₅)₂Ti(N₃)₂ has been demonstrated. The efficiency of the reaction has been measured yielding a quantum yield of 0.025. The mechanism of the photoreactions of (⁵-C₅H₅)₂Ti(N₃)₂ has been studied using Fourier transform-infrared spectroscopy in both a low-temperature 1,2-epoxyethylbenzene glass and as surface films. In each case the primary photochemical process was found to be loss of a single azido group. The result of subsequent photolysis was found to be dependent upon medium and temperature. In the low-temperature glass no further photochemistry was observed. The exhaustive photolysis of films at 20 K, or room temperature, under a vacuum or in air led to loss of all ligands and the formation of TiO₂.     

H∞ ALMOST DISTURBANCE DECOUPLING FOR MIMO BILINEAR SYSTEMS

The H_∞ almost disturbance decoupling problem is considered. In this paper, a nonlinear design is proposed to find a state feedback controller for bilinear systems. The closed‐loop system is internally stable and achieves disturbance attenuation in nonlinear H_∞ sense. We defined a special form of Lyapunov function, which is constructed in terms of one or a set of positive definite constant matrices. If, except of the origin of system, the corresponding polynomial of the positive definite matrix (or several polynomials relevant to the positive definite constant matrices) has (have) no zero on a given subset of state space, then we can construct a controller to solve our problem. It is found that the controller structure could be complicated, but is feasible in computation and may require optimization technique to search the solution. We consider both SIMO and MIMO cases with illustrated examples.     

Fabrication of a high aspect ratio nanoporous array on silicon

In this study, a simple method for the fabrication of high aspect ratio silicon nanoporous arrays is developed. A N-type silicon wafer is used as the substrate material. A micro-scale pattern of the desired porous array is transferred to the front surface of the silicon wafer by photolithography after which the wafer is placed in a home-made fixture to efficiently expel the etching generated air and promptly hold the back-side illumination light. A halogen lamp is used as the light source for backside illumination to enhance the electron–hole pair generation. An anodization process is then carried out using a new etchant consisting of hydrofluoric acid and mixed EtOH and EMSO surfactant to effectively polish the pore surfaces and sharpen the tips of the etched pores. A nanochannel array with a nano-tip of 61.4?nm is obtained.     

Low complexity iterative decoding for bit-interleaved coded modulation

Bit-interleaved coded modulation with iterative decoding (ID) is an effective scheme for both AWGN and fading channels because it simultaneously realizes large Euclidean distance and high diversity. In the literature, ID schemes with hard-decision feedback (HDF), as well as soft-decision feedback (SDF), have been investigated. While HDF/ID exhibits a performance inferior to SDF/ID, it is much simpler to implement. To enhance the performance of HDF/ID with moderate additional complexity, we propose a uniform soft-decision feedback ID (USF/ID) scheme. The proposed scheme is applicable in both single antenna and multiple antenna communication systems. The simulation results verify that it achieves impressive performance gain over HDF/ID and has a practically more attractive implementation than SDF/ID, especially for complexity-constrained wireless applications.     

Cover Picture: Protein Detecting Arrays Based on Cationic Polythiophene–DNA‐Aptamer Complexes (Adv. Mater. 20/2006)

The cover image depicts biochips based on responsive nanoaggregates made from stoichiometric complexes between a cationic polythiophene and an appropriate DNA aptamer. These structures undergo a conformational transition from an unfolded to a folded (G‐quadruplex) structure in the presence of a specific target protein that results in a significant increase of the fluorescence intensity, as reported on p. 2703 by Leclerc and co‐workers.     

Comments on “Quadratic stabilization of continuous timesystems with state-delay and norm-bounded time-varyinguncertainties”

In the above mentioned paper by Mahmoud-Muthairi (ibid. vol.39 (1994)) a sufficient condition for memoryless stabilization of a class of uncertain linear systems with a variable-state delay and norm-bounded time-varying uncertainties is derived in terms of an algebraic Riccati equation. This Riccati equation depends on several free matrix variables, and a subsequent result in the paper, Theorem 2, states that failure or success of the stabilization algorithm is independent of the selection of these matrix variables. In this paper, we give a counterexample to this Theorem 2 as well as providing a fix     

A note on the robust stability of uncertain stochastic fuzzy systems with time-delays

Takagi-Sugeno (T-S) fuzzy models are now often used to describe complex nonlinear systems in terms of fuzzy sets and fuzzy reasoning applied to a set of linear submodels. In this note, the T-S fuzzy model approach is exploited to establish stability criteria for a class of nonlinear stochastic systems with time delay. Sufficient conditions are derived in the format of linear matrix inequalities (LMIs), such that for all admissible parameter uncertainties, the overall fuzzy system is stochastically exponentially stable in the mean square, independent of the time delay. Therefore, with the numerically attractive Matlab LMI toolbox, the robust stability of the uncertain stochastic fuzzy systems with time delays can be easily checked.     

Kinematic optimal design of a paramill: A multi‐SP device

In this paper, a manipulability analysis of a new parallel‐type rolling mill, named “paramill,” in its conceptual design stage is investigated. The paramill considered uses two Stewart platforms (SPs) in opposite directions for the generation of 6 degree‐of‐freedom motions of individual work‐rolls. The objective of this new approach is to pursue an integrated control of the strip thickness, strip shape, pair‐crossing angle, uniform wear of the rolls, and tension of the strip. The forward/inverse kinematics problems are formulated. Two main kinematic parameters, the size of the base and the acute angle made by two neighboring joints for a given size of the work‐roll, have been determined in the way that the force and moment transmission from the actuators to the work‐rolls is maximized. © 2004 Wiley Periodicals, Inc.