A conservative method of wavelet neural network based meta-modeling in constrained approximate optimization

The paper aims at the development of the wavelet neural network (WNN) based conservative meta-model that satisfies the constraint feasibility of approximate optimal solution. The WNN based constraint-feasible meta-model is formulated via exterior penalty method to optimally determine interconnection weights and dilation and translation coefficients in the network. Using Ackley’s path function, the approximation performance of WNN is first tested in comparison with BPN. The proposed approach of constraint feasibility is then verified through a ten-bar planar truss problem. For constrained approximate optimization, the structural design of a composite rotor blade is explored to support the proposed strategies.     

The Shanghai Corporate Pavilion design for World Expo in Shanghai 2010

New technologies are becoming today’s basic building blocks. This paper presents a case study of the Shanghai Corporate Pavilion for the 2010World Expo in Shanghai. From the shape of the building to the use of solar energy, the Shanghai Corporate Pavilion incorporates the state-of-art technologies to convey the spirit of the architecture. It addresses the pressing issue of energy, environment, and sustainability and reflects the spirit of Shanghai as a historically progressive yet still fast moving international metropolis.     

Optimal power system operation using parallel processing system and PSO algorithm

In recent studies, PSO algorithm is applied to solve OPF problem. However, population based optimization method requires higher computing time to find optimal point. This shortcoming is overcome by a straightforward parallelization of PSO algorithm. The developed parallel PSO algorithm is implemented on a PC-cluster system with 8 Intel Pentium IV 2 GHz processors. The proposed approach has been tested on the test systems. The results showed that computing time of parallelized PSO algorithm can be reduced by parallel processing without losing the quality of solution.     

Optical and electrical properties of ZnO thin film containing nano-sized Ag particles

Low-temperature crystallized ZnO thin film was achieved by sol–gel process using zinc acetate dihydrate and 2-methoxyethanol as starting precursor and solvent, respectively. Ag nanoparticles were prepared with uniform size at 4.4 nm by spontaneous reduction method of Ag 2-ethylhexanoate in dimethyl sulfoxide (DMSO). The optical and electrical properties of ZnO thin films containing various contents of Ag-nanoparticles were monitored. Light scattering and charge emission and scattering behaviors of Ag nanoparticles in ZnO film were found. The incorporation of Ag nanoparticles into Al-doped ZnO film was also investigated. The optical transmittance was not degraded but the increase of electrical sheet resistance was found. The effect of Al-dopant on the transmittance and electrical sheet resistance of ZnO film was found too great to distinguish the positive effect of the incorporation of Ag nanoparticles into Al-doped ZnO thin films.     

Reversible Crumpling of 2D Titanium Carbide (MXene) Nanocoatings for Stretchable Electromagnetic Shielding and Wearable Wireless Communication

In the emerging Internet of Things, stretchable antennas can facilitate wireless communication between wearable and mobile electronic devices around the body. The proliferation of wireless devices transmitting near the human body also raises interference and safety concerns that demand stretchable materials capable of shielding electromagnetic interference (EMI). Here, an ultrastretchable conductor is fabricated by depositing a crumple‐textured coating composed of 2D Ti₃C₂T_x nanosheets (MXene) and single‐walled carbon nanotubes (SWNTs) onto latex, which can be fashioned into high‐performance wearable antennas and EMI shields. The resulting MXene‐SWNT (S‐MXene)/latex devices are able to sustain up to an 800% areal strain and exhibit strain‐insensitive resistance profiles during a 500‐cycle fatigue test. A single layer of stretchable S‐MXene conductors demonstrate a strain‐invariant EMI shielding performance of ≈30 dB up to 800% areal strain, and the shielding performance is further improved to ≈47 and ≈52 dB by stacking 5 and 10 layers of S‐MXene conductors, respectively. Additionally, a stretchable S‐MXene dipole antenna is fabricated, which can be uniaxially stretched to 150% with unaffected reflected power <0.1%. By integrating S‐MXene EMI shields with stretchable S‐MXene antennas, a wearable wireless system is finally demonstrated that provides mechanically stable wireless transmission while attenuating EM absorption by the human body.     

Trilayer Nanomesh Films with Tunable Wettability as Highly Transparent,Flexible, and Recyclable Electrodes

Metallic mesh materials are promising candidates to replace traditional transparent conductive oxides such as indium tin oxide (ITO) that is restricted by the limited indium resource and its brittle nature. The challenge of metal based transparent conductive networks is to achieve high transmittance, low sheet resistance, and small perforation size simultaneously, all of which significantly relate to device performances in optoelectronics. In this work, trilayer dielectric/metal/dielectric (D/M/D) nanomesh electrodes are reported with precisely controlled perforation size, wire width, and uniform hole distribution employing the nanosphere lithography technique. TiO₂/Au/TiO₂ nanomesh films with small hole diameter (≤700 nm) and low thickness (≤50 nm) are shown to yield high transmittance (>90%), low sheet resistance (≤70 Ω sq^?1), as well as outstanding flexural endurance and feasibility for large area patterning. Further, by tuning the surface wettability, these films are applied as easily recyclable flexible electrodes for electrochromic devices. The simple and cost‐effective fabrication of diverse D/M/D nanomesh transparent conductive films with tunable optoelectronic properties paves a way for the design and realization of specialized transparent electrodes in optoelectronics.     

Estimating Travel Times of Field Engineers

BT's Work Manager platform uses a dynamic scheduler to plan the daily jobs of field engineers. In order to produce reliable schedules, Work Manager requires accurate estimates about the time an engineer spends on travelling from one job location to the next (inter-job time) and how much time is required to complete a job. We have developed a generic platform called Intelligent Travel Time Estimation and Management System (ITEMS) that we have used to derive a specialised version for modelling the behaviour of BT's mobile workforce. This travel time estimation system (TTE) receives job data every night and learns a new estimation model on a daily basis. When a new estimation model significantly differs from the currently used model, the new estimation model is automatically uploaded into Work Manager. The estimation algorithm has been used in a loosely coupled trial for about two years. Currently, we are undertaking trials of TTE — a tightly coupled Web-based system that fully automates the learning and management of estimation models, providing a graphical user interface that displays rich detail about the travel patterns of BT's mobile workforce. During the trial period we have observed that using TTE can quickly improve the accuracy of travel time estimates by up to 10%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Design and fabrication of a significantly shortened multimode interference coupler for polarization splitter application

We report that we have successfully designed and fabricated a significantly shortened multimode interference coupler for application in polarization splitter, using a phenomenon that we termed "quasi-state" (QS) imaging effect. First, we identified and analyzed the QS imaging effect, and, based on the QS analysis, designed and fabricated a novel multimode interference (MMI) device with its split length shortened to 1/5 of a normally designed MMI split length. The fabrication is simple and cost effective and the fabricated device shows outstanding characteristics in extinction ratio, signal homogeneity, excess loss, and tolerance in the length of the splitter.     

A New Approach for Built‐in Self‐Test of 4.5 to 5.5 GHz Low‐Noise Amplifiers

This paper presents a low‐cost RF parameter estimation technique using a new RF built‐in self‐test (BIST) circuit and efficient DC measurement for 4.5 to 5.5 GHz low noise amplifiers (LNAs). The BIST circuit measures gain, noise figure, input impedance, and input return loss for an LNA. The BIST circuit is designed using 0.18 μm SiGe technology. The test technique utilizes input impedance matching and output DC voltage measurements. The technique is simple and inexpensive.     

Computing the Average Symbol Error Probability of the MPSK System Having Quadrature Error

When quadrature error exists, the shape of the M‐ary phase shift keying (MPSK) signal constellation becomes skewed‐elliptic. Each MPSK symbol takes on a different symbol error probability (SEP) value. The analytical results presented thus far have been derived from studies which examined the SEP problem assuming that the SEP of each MPSK symbol is equally likely; therefore, those results should not be treated as offering a complete solution. In this letter, we present a new and more complete solution to the SEP problem of MPSK by relaxing the above assumption and finding the expressions for the average as well as individual SEP in the presence of quadrature error.