Influence of Potassium on Preparation and Performance of PTC Resistors

Different amounts of K₂CO₃ were added to (Ba,Sr)TiO₃-based PTCR (positive temperature coefficient of resistance) ceramics to investigate their influence on the microstructural and electrical properties. Experimental results showed that the incorporation of K acted as an A-site acceptor-type dopant. In addition to enhancing discontinuous grain growth, the increase of K₂CO₃ was found to raise the room-temperature resistivity which was dominated by grain-boundary resistance rather than grain resistance. By adjusting to a suitable amount of donor dopant, the inherent contamination of K in raw material can be compensated to achieve a high-quality PTC resistor.     

A randomized algorithm for natural object colorization

Natural objects often contain vivid color distribution with wide variety of colors. Conventional colorization techniques, on the other hand, produce colors that are relatively flat with little color variation. In this paper, we introduce a randomized algorithm which considers not only the value of target color but also the distribution of target color. In essence, our algorithm paints a color distribution to a region which synthesizes color distribution of a natural object. Our approach models the correlation between intensity and color in HSV color space in terms of H – S, H – V and S – V joint histogram. During the colorization process, we randomly swap and reassign color of a pixel to minimize a cost function that measures color consistency to its neighborhood and intensity‐to‐color correlation captured in the joint histogram. We tested our algorithm extensively on many natural objects and our user study confirms that our results are more vivid and natural compared to results from previous techniques.     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Thermal conductivity of high polymers—the influence of molecular weight

Some earlier observations on the influence of molecular weight, plasticizer, and irradiation on the thermal conductivity of polymers is reviewed. Also some new data on polystyrene and some new calculations based on the theory of Hansen and Ho are presented. These data show almost a two fold increase in the thermal conductivity of polystyrene as the molecular weight goes from 900 to 100,000. Data on the moleculer weight effect on thermal conductivity appear to be consistent with the theoretical calculations.     

如何设置定时关机

正当你需要休息或者外出时,这时电脑可能还需要继续运行,比如备份文件、下载文件之类的可以由软件自主完成的任务等等,这时候你就需要通过设置定时关机来管理你的电脑。定时关机除了可以使用系统自带的命令来实现之外,还可以用一些软件来实现,以下一一为大家讲述。     

Creep and Stress Rupture Behavior of an Advanced Silicon Nitride: Part I, Experimental Observations

Cylindrical buttuohead specimens of an advanced silicon nitride were tested in uniaxial tension at temperatures between 1422 and 1673 K. In the range 1477 to 1673 K, creep deformation was reliably measured using high-temperature contact probe extensometry. Extensive scanning and transmission electron microscopy has revealed the formation of lenticular cavities at two-grain junctions at all temperatures (1422–1673 K) and extensive triple-junction cavitation occurring at the higher temperatures (1644–1673 K). Cavitation is believed to be part of the net creep process. The stress rupture data show stratification of the Monkman–Grant lines with respect to temperature. Failure strain increased with increase in rupture time or temperature, or decrease in stress. Fractography showed that final failure occurred by subcritical crack growth in all specimens.     

Synthesis and characterization of in situ polymerized segmented thermoplastic elastomeric polyurethane/layered silicate clay nanocomposites

Nanocomposites based on thermoplastic elastomeric polyurethane (TPU) and layered silicate clay were prepared by in situ synthesis. The properties of nanocomposites of TPU with unmodified clay were compared with that of organically modified clay. The nanocomposites of the TPU and organomodified clay showed better dispersion and exhibited superior properties. Exfoliation of the clay layers was observed at low organoclay contents, whereas an intercalated morphology was observed at higher clay contents. As one of major purposes of this study, the effect of the silicate layers in the nanocomposites on the order–disorder transition temperature (T_ODT) of the TPU was evaluated from the intensity change of the hydrogen‐bonded and free carbonyl stretching peaks and from the peak position change of the N? H bending peak. The presence of the organoclay increased T_ODT by approximately 10°C, which indicated improved stability in the phase‐separated domain structure. The layered silicate clay caused a tremendous improvement in the stiffness of the TPU; meanwhile, a reduction in the ultimate elongation was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3048–3055, 2006     

Characterization and preparation of new multiwall carbon nanotube/conducting polymer composites by in situ polymerization

Composites based on poly(diphenyl amine) (PDPA) and multiwall carbon nanotubes (MWNTs) were prepared by chemical oxidative polymerization through two different approaches: in situ polymerization and intimate mixing. In in situ polymerization, DPA was polymerized in the presence of dispersed MWNTs in sulfuric acid medium for different molar composition ratios of MWNT and DPA. Intimate mixing of synthesized PDPA with MWNT was also used for the preparation of PDPA/MWNT composites. Transmission electron microscopy revealed that the diameter of the tubular structure for the composite was 10–20 nm higher than the diameter of pure MWNT. Scanning electron microscopy provided evidence for the differences in the morphology between the MWNTs and the composites. Raman and Fourier transform IR (FTIR) spectroscopy, thermogravimetric analysis, X‐ray diffraction, and UV–visible spectroscopy were used to characterize the composites and reveal the differences in the molecular level interactions between the components in the composites. The Raman and FTIR spectral results revealed doping‐type molecular interactions and coordinate covalent‐type interactions between MWNT and PDPA in the composite prepared by in situ polymerization and intimate mixing, respectively. The backbone structure of PDPA in the composite decomposed at a higher temperature (>340°C) than the pristine PDPA (～300°C). This behavior also favored the molecular level interactions between MWNT and PDPA in the composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3721–3729, 2006     

Effects of rosemary extracts and major constituents on lipid oxidation and soybean lipoxygenase activity

Rosemary (Rosemarinus officinalis L.) leaves were extracted with three different solvents, namely hexane, acetone and methanol. A reverse-phase high-performance liquid chromatography system in combination with a mass detector was used to quantitate the content of carnosol, carnosic acid and ursolic acid in the rosemary extracts. All rosemary extracts showed strong inhibitory effects on lipid oxidation and soybean lipoxygenase activity.