Effect of Alumina Reactivity on the Densification and Properties of Al2O3–Cr2O3 Refractories

Alumina‐chrome (Al₂O₃–Cr₂O₃) refractories with Al₂O₃:Cr₂O₃ molar ratio 1:1 were synthesized in the temperature range of 1400–1700°C by conventional solid–oxide reaction route. The effect of different aluminas (viz., hydrated and calcined) on the densification, microstructure, and properties of Al₂O₃–Cr₂O₃ refractories was investigated without changing the Cr₂O₃ source. The starting materials were analyzed to determine the chemical composition, mineralogy, density, surface area, and particle size. Sintered materials were characterized in terms of densification, phase assemblage, and mechanical strength at room temperature and at higher temperatures. Microstructural evolution at different sintering temperature was correlated with sintering characteristics. It can be concluded that the Al₂O₃–Cr₂O₃ refractories prepared with hydrated alumina as Al₂O₃ source show better densification and hot mechanical strength than corresponding calcined variety.     

High‐strength biodegradable poly(vinyl alcohol)/fly ash composite films

We prepared biodegradable composite films of poly(vinyl alcohol) (PVA) and fly ash (FA) spanning 5, 10, 15, 20, and 25 wt % concentrations by casting aqueous solutions. The tensile strengths of the composite films were increased proportionally via the addition of FA. The strength of the film was enhanced by 193% with 20% FA compared to the neat PVA control. Further addition of FA deviated from the linear trend. The moduli of the composites also increased proportionally with FA addition to 212% at 20 wt % FA addition compared to the control. The percentage strain at break exponentially decreased with the addition of FA. In the dynamic mechanical behavior, the storage and loss moduli both increased with FA content. The tan δ peaks corresponding to the glass‐transition temperature shifted 5–10°C higher above the control sample (73°C). This shift was attributed to a reduction in the mobility of PVA segments because they were anchored by the FA surface. The reductions in mobility manifested in strong interfacial interactions were indicative of hydrogen bonding. Broadening and reduction in the intensities of the stretching and bending peaks of ? OH, ? CH and ? C?O of PVA in the Fourier transform infrared spectra were observed. This suggested that hydrogen bonding was active between the functional groups in the FA and PVA chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Indole‐based polymer and its silver nanocomposite as advanced antibacterial agents: synthetic path,kinetics of polymerization and applications

Atom transfer radical polymerization of 1‐allylindole‐3‐carbaldehyde (AIC) was studied by employing 2‐bromoisobutyryl bromide as initiator in toluene. It led to controlled radical polymerization of AIC, with an increase of molecular weight along with the conversion of the monomer, and a relatively narrow molar mass distribution was obtained, as determined by gel permeation chromatography. The living nature of poly(1‐allylindole‐3‐carbaldehyde) (PAIC) was confirmed by the chain extension polymerization whereas ¹H NMR analysis showed that the major population of PAIC retained the chain‐end functional group. PAIC and its silver nanocomposite were found to be biologically active against some tested bacterial pathogens. Minimum inhibitory concentration tests revealed that PAIC exhibited antibacterial activity against Staphylococcus aureus, Proteus mirabilis and Klebsiella pneumonae whereas PAIC/Ag nanocomposite showed antibacterial activity against Enterococcus faecalis and K. pneumonae. © 2012 Society of Chemical Industry     

An algorithm to represent occupant use of windows and fans including situation-specific motivations and constraints

A theoretical model of the interaction between a building and its occupants is developed based on field survey data; the role of the model in building performance simulation is illustrated. If free to do so, people adjust their clothing or available building controls (windows, blinds, doors, fans, and thermostats) with the aim of achieving or restoring comfort and reducing discomfort. Initially responses to thermal conditions are considered. Trigger temperatures are established where responses to warm or cold thermal discomfort may occur. These trigger-temperatures depend on (among other things) clothing (which may depend on season and social conditions) and air movement (e.g., fan setting). Trigger-temperatures differ from person to person and from time to time. If several controls are available people will use those that are most user-friendly, effective and free from undesirable consequences, and this is represented in the model by a constraint assigned to each control option. The concept of constraints is then expanded to capture non-thermal stimuli for control use (e.g., fresh-air). Using datasets from surveys in Europe and Pakistan, estimates are made of the parameters used in the model: the comfort temperature in relation to the prevailing outdoor temperature, the extent of inter-personal variation of trigger temperature, the effect of a fan on the comfort temperature, and the values of constraints that affect the use of windows and fans in the surveyed buildings. The incorporation of the new model, including constraints, into building simulation code is illustrated. Some limitations or unknowns in the current model are identified and possible approaches for future research to fill these gaps suggested. The application of the model in building performance analysis and building design is discussed.     

Robust observer based control for plasma glucose regulation in type 1 diabetes patient using attractive ellipsoid method

This paper deals with the design of robust observer based output feedback control law for the stabilisation of an uncertain nonlinear system and subsequently apply the developed method for the regulation of plasma glucose concentration in Type 1 diabetes (T1D) patients. The principal objective behind the proposed design is to deal with the issues of intra‐patient parametric variation and non‐availability of all state variables for measurement. The proposed control technique for the T1D patient model is based on the attractive ellipsoid method (AEM). The observer and controller conditions are obtained in terms of linear matrix inequality (LMI), thus allowing to compute easily both the observer and controller gains. The closed‐loop response obtained using the designed controller avoids adverse situations of hypoglycemia and post‐prandial hyperglycemia under uncertain conditions. Further to validate the robustness of the design, closed‐loop simulations of random 200 virtual T1D patients considering parameters within the considered ranges are presented. The results indicate that hypoglycemia and post‐prandial hyperglycemia are significantly reduced in the presence of bounded (±30% ) parametric variability and uncertain exogenous meal disturbance.Inspec keywords: medical control systems, observers, uncertain systems, nonlinear control systems, robust control, control system synthesis, linear matrix inequalities, feedback, sugar, closed loop systems, diseasesOther keywords: virtual T1D patients, type 1 diabetes patients, closed‐loop simulations, uncertain conditions, post‐prandial hyperglycemia, designed controller, closed‐loop response, controller gains, linear matrix inequality, controller conditions, T1D patient model, control technique, intra‐patient parametric variation, principal objective, plasma glucose concentration, uncertain nonlinear system, robust observer based output feedback control law, attractive ellipsoid method, plasma glucose regulation     

Interviewer predictions of applicant qualifications and interviewer validity: Aggregate and individual analyses.

The relative effects of varied interviewee cues on line managers' hiring decisions were examined, as was the relative predictability of various criteria by line managers' interview impressions. Aggregate and individual regression analyses revealed that 3 nursing directors' impressions of 186 nursing applicants shaped their hiring recommendations more than did the applicants' resume credentials. Moreover, managers' interview impressions significantly predicted employees' job attitudes, though predictions of attitudes did not exceed predictions of performance. Finally, individual managers based hiring decisions on different interview impressions, and these impressions forecast employees' job attitudes with differential validity. Implications for future interviewing research are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dynamic process modelling of iron ore sintering

A mathematical model was developed for the iron ore sintering process considering all the major thermochemical phenomena in the system, assuming both the static and moving bed configurations. The model predicted a large number of parameters pertinent to the sintering process including the temperatures of the gas and solid, concentration of various species, amount of solid melted etc. The results were tested against the data existing in literature, and a limited number of pot tests conducted in a pilot plant. Despite high complexity of the problem, the agreement between the experimental and simulated data was reasonably good.     

Alkylation of phenol with tert‐butyl alcohol over a catalyst synthesized from coal fly ash

The alkylation of phenol with tert‐butyl alcohol was carried out in a continuous flow reactor over a catalyst synthesized from fly ash. The activity of the synthesized catalyst was compared with those of other conventional zeolite catalysts such as 13X (NaX) and Hβ. Of all the catalysts tested, zeolite Hβ showed the highest activity in phenol conversion followed by the synthesized zeolite (HZOP‐31). The activity of commercial 13X zeolite was found to be same as that of HZOP‐31. Ce‐exchanged catalyst (CeZOP‐31) showed even better performance than 13X in the alkylation of phenol. The effects of different parameters such as reactant mole ratio, temperature and space velocity on phenol conversion and tert‐butyl phenol selectivity were studied. The effect of mass transfer resistance was found to be negligible within the feed rate range and particle size range studied. The apparent activation energy for the reaction of tert‐butyl alcohol over HZOP‐31 was determined as 30.1 kJ mol^?1. Copyright © 2006 Society of Chemical Industry