炮塔加热过程数学模型与计算机仿真研究

通过对炮塔热处理加热过程的分析研究,取局部最大壁厚处作为二维非稳定态传热问题进行离散化处理,建立了工件加热过程显式有限差分仿真模型。并对计算机仿真结果与实测数据进行了比较验证。     

对主成分分析在搅拌桩质量检测的评判研究

简述了桩身质量检测的常用方法及评判标准,采用主成分分析原理与关联度分析原理,结合搅拌桩检测资料,对影响桩身质量的因素进行了分析研究,得出了一些有价值的结论,对搅拌桩检测方法及评判标准的改进与完善具有参考意义.     

Procedural Synthesis using Vortex Particle Method for Fluid Simulation

We propose a fast and effective technique to improve sub‐grid visual details of the grid based fluid simulation. Our method procedurally synthesizes the flow fields coming from the incompressible Navier‐Stokes solver and the vorticity fields generated by vortex particle method for sub‐grid turbulence. We are able to efficiently animate smoke which is highly turbulent and swirling with small scale details. Since this technique does not solve the linear system in high‐resolution grids, it can perform fluid simulation more rapidly. We can easily estimate the influence of turbulent and swirling effect to the fluid flow.     

Ultralow feeding gas flow guiding growth of large-scale horizontally aligned single-walled carbon nanotube arrays

On the basis of the rational analysis about the fluidic property of the system, an ultralow gas flow chemical vapor deposition (CVD) strategy was designed to prepare large-scale horizontally aligned ultralong single-walled carbon nanotube (SWNT) arrays. SWNT arrays could be well obtained under extremely low feeding flow of 1.5 sccm in a 1 in. quartz tube reactor. It was confirmed that the tubes grew floatingly and could cross microtrenches or climb over micro-obstacles in ultraslow gas flow. SWNTs arrays also could be formed no matter the substrate was placed vertically or upside down. The growth mechanism was discussed. Both the buoyancy effect induced by gas temperature/density difference and gas flow stability played dominant roles. More attractively, simultaneous batch-scale preparation of SWNT arrays was realized by the ultralow gas flow strategy. This new strategy turns to be more abstemious, efficient, promising, and flexible compared with the high gas flow rate fast-heating CVD processes.     

A novel de-rusting method with molten salt precleaning and laser cleaning for the recycling of steel parts

Clean Technologies and Environmental Policy - Steel parts are a kind of high recovery value product for which de-rusting is the primary step in the recycling process. Laser cleaning is a popular...     

Binuclear aluminum complex as an efficient orange emitter in single-layer electroluminescent devices

A binuclear aluminum complex with a chelating anilido-imine conjugated Schiff base ligand, 1,4-{o-C₆H₄[N(2,6-ⁱPr₂C₆H₃)][CH  N]Al(CH₃)₂}₂C₆H₄ (3), was synthesized from the alkane elimination reaction of trimethylaluminum with the free ligand, 1,4-{o-C₆H₄[NH(2,6-ⁱPr₂C₆H₃)][CH  N]}₂C₆H₄ (2), at room temperature. The photophysical properties of complex 3 were briefly examined and it was found that complex 3 displays bright orange luminescence in solution and in solid state. Electroluminescent devices were fabricated by doping complex 3 in polymer blend host of poly(vinylcarbazole) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazol using simple solution spin-coating technique. Efficient orange light emission was obtained from the fabricated single-layer organic light-emitting devices with a maximum current efficiency of 3.2 cd/A.     

禹门口提水工程基坑开挖控制爆破

该项工程的开挖爆破中,采用塑料导爆管非电起爆技术等措施,成功地解决了复杂环境条件下的爆破安全问题,为同类工程施工提供了可借鉴的经验。     

项目制造型企业上游价值链增值特征

阐述了项目制造型企业上游价值链的内涵,提出了项目制造型企业上游价值链结构模型,讨论了结构模型中不同价值单元的价值形态,在此基础上对各价值单元的增值特征进行了分析。     

Synthesis, characterization and osteoconductivity properties of bone fillers based on alendronate-loaded poly(ε-caprolactone)/hydroxyapatite microspheres

A superior drug controlled release system capable of achieving efficient osteogenesis is in imperative demand because of limited bone substitute tissue for the treatment of bone defect. In the present study, we investigated the potential of using poly(ε-caprolactone)–hydroxyapatite (PCL–HA) composite microspheres as an injectable bone repair vehicle by controlled release of alendronate (AL), a medicine that belongs to the bisphosphonates family. The PCL/HA–AL microspheres were prepared with solid/oil/water emulsion technique, which included two processes: (1) AL was loaded on the hydroxyapatite nanoparticles; (2) the HA–AL complex was built in the PCL matrix. The spherical PCL/HA–AL microspheres were characterized with its significantly improved encapsulation efficiency of hydrophilic AL and better sustained release. Human bone mesenchymal stem cells (hMSCs) were cultured on the surface of these microspheres and exhibited high proliferative profile. Specifically, in osteogenic medium, hMSCs on the surface of PCL/HA–AL microspheres displayed superior osteogenic differentiation which was verified by alkaline phosphatase activity assay. In conclusion, by presenting strong osteogenic commitment of hMSCs in vitro, the PCL/HA–AL microspheres have the potential to be used as an injectable vehicle for local therapy of bone defect.