Triangular element partition method with consideration of crack tip

In fracture simulation,how to model the pre-existing cracks and simulate their propagation without remeshing is an important topic.The newly developed triangular element partition method(TEPM)provides an efficient approach to this problem.It firstly meshes the cracked body regardless of the geometry integrity of the interesting object with triangular elements.After the meshing procedure is completed,some elements are intersected by cracks.For the element intersected by a crack,the TEPM takes the element partition technique to incorporate the discontinuity into the numerical model without any interpolation enrichment.By this approach,the TEPM can simulate fracture without mesh modification.In the TEPM,all the cracked elements are treated as the usual partitioned elements in which the crack runs through.The virtual node pairs(the intersection points of crack faces and elements)at the opposite faces of the crack move independently.Their displacements are respectively determined by their neighbor real nodes(nodes formatted in the original mesh scheme)at the same side of the crack.However,among these cracked elements,the element containing a crack tip,referred to as the crack tip element thereafter,behaves differently from those cut through by the crack.Its influence on the singular field at the vicinity of the fracture tip becomes increasingly significant with the element size increasing.In the crack tip element,the virtual node pair at the crack tip move consistently before fracture occurs while the virtual node pair separate and each virtual node moves independently after the fracture propagates.Accordingly,the crack tip element is automatically transformed into the usual partitioned element.In the present paper,the crack tip element is introduced into the TEPM to account for the effect of the crack tip.Validation examples indicate that the present method is almost free from the element size effect.It can reach the same precision as the conventional finite element method under the same meshing scheme.But the TEPM is much more efficient and convenient than the conventional finite element method because the TEPM avoids the troubles that the conventional finite element method suffers,e.g.,the meshing problem of cracked body,modification of mesh scheme,etc.Though the extended finite element method can also avoid these troubles,it introduces extra degrees of freedom due to node interpolation enrichment.Due to the simplicity of the present TEPM,it is believed that its perspective should be highly inspiring.     

建设项目设计阶段投资控制系统的建立与分析

针对建设设计阶段独立使用价值工程、优化设计和限额设计等方法进行投资控制的局限性,借鉴系统论、控制论、信息论等思想和方法,建立了设计阶段投资控制系统。系统主要由探测元件、控制元件和执行元件组成,探测元件进行设计阶段的信息收集;控制元件通过审核将各项投资控制活动与投资控制目标进行对比,提出应对策略;执行元件完成应对策略。通过投资控制系统的执行,实现对设计阶段各项活动的全面系统控制,从管理层面上解决设计阶段投资控制活动割裂问题,进而改善设计阶段整体投资控制效果。     

Biofouling control by quorum sensing inhibition and its dependence on membrane surface

Biofouling control by quorum sensing (QS) inhibition and the influence of membrane surface characteristics on biofilm formation and QS inhibition were investigated. Pseudomonas putida isolated from the bio-fouled reverse osmosis (RO) membranes in a real plant was used. Acylase was chosen as a model QS inhibitor. Bacteria on the membrane coupons were quantified with the heterotrophic plate count method. Cell distribution was imaged by a confocal laser scanning microscope. Results showed that biofilm formation on the membrane was reduced by acylase as it inhibits the activity of N-acylhomoserine lactone (AHL) which is a signal molecule of QS. It was also shown that membrane surface characteristics were influential factors affecting bacterial adhesion, biofilm formation, and QS inhibition.     

Analysis of the unloading performance considering dimple–flexure behavior in HDD

Currently, almost all hard disk drives (HDDs) have adopted a loading/unloading mechanism that increases their recording capacity and improves their reliability. However, these mechanisms still create a few scratches or defects in the loading/unloading zone. Slipping at the dimple–flexure interface was recently reported as one of the causes. In this research, we first analyzed the relative behavior of dimple–flexure based on fretting wear marks. We determined that the dimple–flexure behavior included both slipping and rotating motion simultaneously. We then verified the distinct slipping and rolling phenomenon at the moment of ramp contact using finite-element method (FEM) analysis. An experimental setup was constructed, and an unloading experiment was carried out to obtain the ramp contact characteristics corresponding to various unloading velocities. Based on the verified FEM, the characteristics of dimple–flexure relative behavior were investigated for various suspension design parameters, ramp contact characteristics, and unloading velocities. A higher ramp contact force and shorter contact duration resulted in larger slip displacements and roll angles between the dimple and the flexure. Finally, we analyzed the unloading performance of an HDD for various design parameters using quasi-static approximation while considering the relative behavior between the dimple and flexure. The quasi-static analysis indicated a change of approximately 15?% in the flying height at an unloading velocity of 40?in. per second when the relative motion between the dimple and flexure was considered during the unloading process. Even, slider–disk contact occurred at an unloading velocity of 50 ISP.     

The oxidation state of sulfur detected in Na2O-CaO-SiO2 float glass by X-ray absorption near edge structure spectra

The oxidation state of sulfur is detected in Na2O-CaO-SiO2 float glass by synchrotron radiation X-ray absorption near edge structure (XANES) spectra at the sulfur K edge. The measured spectra show the only presence of S6+ in the Na2O-CaO-SiO2 float glass and the oxidation state of sulfur do not change with the increase of glass depth. It is also found that, after the melt has gone through the molten tin bath, the S6+ is the dominant species, but S2- is also present on both surfaces. It is not certain whether cation bonds to S2- or not, because there are many cations dissolved in the melted tin which makes the spectrum complicated.     

锅炉过热器/再热器管道热流密度的评估方法

通过建立数值模型进行编程计算,分析了锅炉过热器/再热器管道在不同的管道几何尺寸、烟气温度、蒸汽流量和温度下,各个界面热流密度的变化情况。通过回归分析得到了热流密度与管道内壁侧氧化层厚度和运行时间的关系表达式,即热流密度的评估关系式。     

从媒体控制探讨媒体工作者的性观念与性道德

从媒体控制考察媒体工作者的性观念与性道德,围绕媒体工作者的双重身份——普通大众与媒体人,对媒体工作者进行实证调查,分析得出媒体工作者的性观念与性道德总体上趋于保守和规范,但仍存在偏离现象。     

云南综合类高校教学质量调查与分析——基于学生视角的教学质量现状分析

通过文献检索、问卷调查等方式,将在校生对学校教学环境的满意度、对学校和专业的认同感、对学校教学活动的认同感、参与学校管理的意识、见习状况、教学成效等因素的满意度作为高校教学质量评估体系构成的主要内容,对云南省4所综合类高校的教学质量进行调查研究,探讨云南省综合类高校教学质量存在的问题,并在此基础上提出相应对策。     

协合型增稠剂的流变性及其应用性能的研究

本文采用Brookfield RVT型旋转粘度计进行粘度测定,研究协合协增稠剂的流变性,将粘度数据进行计算机处理,回归出Casson方程,获得屈服值和无穷大剪切粘度,以描述增稠体系的遮盖力、稳定性、流平和流挂、沉降等性质,并对耐电解质性和后增稠进行了测试。本方法通过对粘度的测定,提供了一种对增稠剂的应用性能进行综合评价的途径。     

一类非光滑非凸分式半无限规划的最优性

在一致Fb-凸函数，一致Fb-伪凸和一致Fb-拟凸等广义凸性函数的基础上，研究了一类分式半无限规划问题，得到了涉及这些广义凸性函数的一类非光滑分式半无限规划的一些最优条件。