Morphology Control and Optical Absorption Properties of Ag Nanoparticles by Ion Implantation

Ion implantation is a powerful method for fabricating nanoparticles in dielectric.For the actual application of nanoparticle composites,a careful control of nanoparticles has to be achieved.In this letter,the size,distribution and morphology of Ag nanoparticles are controlled by controlling the ion current density,ion implantation sequence and ion irradiation dose.Single layer Ag nanoparticles are formed by Ag+ion implantation at current density of 2.5μA/cm2.By Ag and Cu ions sequential implantation,the siz...     

Modulating lateral strain in GaN-based epitaxial layers by patterning sapphire substrates with aligned carbon nanotube films

A novel carbon nanotube-patterned sapphire substrate (CPSS) has been utilized for the growth of GaN material and fabrication of a InGaN/GaN light emitting diode (LED) by metal-organic vapor phase epitaxy. Different lateral strain distributions and stress reductions were observed in a GaN thin film on CPSS compared with those on a conventional sapphire substrate. Nanoheteroepitaxy induced by small size nucleation islands of about 50 nm is ascribed to this significant strain modulation. The crystalline quality of the GaN thin film was also improved, as illustrated by X-ray diffraction. Performances of 1 mm × 1 mm LEDs on CPSS were also enhanced, with an operational power increase of 37.5% and higher saturation current.      

基于NIOSII的红外图像实时非均匀性校正

实时红外图像非均匀性校正是红外热成像系统的基础.采用Altera公司的NIOSII嵌入式软核CPU技术,提出了一种基于非线性拟合的实时校正方法以及利用FPGA为核心的硬件实现途径.针对校正中耗时的算法用FPGA中模块完成,采用NIOSII处理器的自定制指令,使FPGA的并行性和DSP的灵活性完美结合在一起,极大的提高了系统的性能.该方法动态范围大,系统仅采用一片FPGA芯片,使得系统小型化成为可能.介绍了硬件电路的原理图以及工作过程并给出实验结果.实验证明了这种方法的优越性,并取得了满意的实验结果.     

Creation of Faceted Polyhedral Microgels from Compressed Emulsions

Compressed monodisperse emulsions in confined space exhibit highly ordered structures. The influence of the volume fraction and the confinement geometry on the organized structures is investigated and the mechanism by which structural transition occurs is studied. Based on the understanding of ordering behavior of compressed emulsions, a simple and high‐throughput method to fabricate monodisperse polyhedral microgels using the emulsions as the template is developed. By controlling the geometry of the confined spaces, a variety of shapes such as hexagonal prism, Fejes Toth honeycomb prism, truncated octahedron, pyritohedron, and truncated hexagonal trapezohedron are implemented. Moreover, the edge sharpness of each shape is controllable by adjusting the drop volume fraction. This design principle can be readily extended to other shapes and materials, and therefore provides a useful means to create polyhedral microparticles for both fundamental study and practical applications.     

钢筋混凝土剪力墙多垂直杆单元模型力学性质分析及其改进

分析了多垂直杆单元的力学性质,证明了与之等效的梁单元的转角和横向位移的位移函数均为一次式,且该梁单元在求弯曲横向位移时,需采用1节点数值积分。讨论了多垂直杆单元模型转动中心c值的含义,认为c值反映了数值积分的求积节点或假设剪切应变插值点的变化,会对单元的刚度产生影响,并对c值的取值范围提出了合理建议。提出了竖向弹簧布置的改进方式,按高斯点布置代替均布方式时,能够用较少的弹簧得到更为精确的结果,提高了计算速度。最后,从横向位移模式和剪应力不均匀分布两个方面提出了改进多垂直杆单元模型的新构想。