Electrochemical sensor based on Prussian blue nanorods and gold nanochains for the determination of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

In this paper, a novel electrochemical sensor for the detection of H₂O₂ was proposed based on gold nanochains and prussian blue nanorods (PB@MWCNTs), which were synthesized with multiwall carbon nanotubes (MWCNTs) as a template. With the introduction of MWCNTs and the gold nanochains, the proposed system shows synergy among the Prussian blue (PB), MWCNTs, and the gold nanochains, which amplifies the H₂O₂ sensitivity greatly. A linear range from 1.75 × 10⁻⁶ to 1.14 × 10⁻³ M with a detection limit of 0.5 × 10⁻⁶ M (S/N = 3) and a high sensitivity 300 μA mM⁻¹ cm⁻² for H₂O₂ detection is obtained. Moreover, the sensor exhibits good repeatability and stability.     

液比对尾叶桉硫酸盐法制浆过程中脱木素的影响

本文以尾叶桉为原料,研究了液比对其在硫酸盐法蒸煮过程中脱木素的影响;在此基础上,建立了基于蒸煮液比、纸浆修正卡伯值预测溶解木素量的数学方程,即CLS=1.94(45-KappaM)(L-1.8)+136。结果表明:在蒸煮前期(保温15min前),相同卡伯值条件下,液比变化对溶解木素的扩散几乎无影响;在蒸煮后期(保温15min后),相同卡伯值下,液比越小木素溶出量随之减少。     

Transparent Electrothermal Film Defoggers and Antiicing Coatings based on Wrinkled Graphene

Fog, frost, ice, and other natural phenomena can inevitably affect human life and the function of equipment. Therefore, removal or prevention is an urgent problem to be solved. As a new type of 2D material, graphene possesses great application potential in defogging and antiicing. In this work, a graphene film with intentionally increased defects and uniformly distributed wrinkles is synthesized on copper–zinc alloy substrates by chemical vapor deposition, and transparent electrothermal film defoggers are prepared based on such material. The defoggers can completely remove fog within 5 s when supplying a safe voltage of 28 V. The surface resistance of the defoggers is sensitive to humidity and it can monitor the defogging process in real time. Such outstanding performance is attributed to the ultrafast evaporation mechanism, which can prevent excessive water accumulation. The antiicing performance of wrinkled graphene (WG) is further studied. The antiicing coatings can delay freezing for 1.25 h at ?15 °C or 2.8 h at ?10 °C. The superior performance of WG can be explained by its unique surface structure and nanoscale roughness. Taken together, WG is expected to be used in antifog glass, rearview mirror defogging, aircraft surface deicing, and other applications.     

Microstructural evolution and defect formation in a powder metallurgy nickel-based superalloy processed by selective laser melting

In this study,the selective laser melting(SLM)technology has been employed to manufacture a nickelbased superalloy which was conventionally prepared through powder metallurgy(PM)route.The microstructural features and defects were systematically investigated both prior to and after heat treatment and compared with the PM counterpart.Both solidification cracking and liquation cracking were observed in the SLM specimen in which the grain misorientation and low melting point(γ+γ')eutectic played a vital role in their formation mechanism.Columnar grains oriented along building direction were ubiquitous,corresponding to strong<001>fiber texture.Solidification cell structures and melt pools are pervasive and noγ'precipitates were detected at about 10 nm scale before heat treatment.After supersolvus solution and two-step aging treatments,high volume fractionγ'precipitates emerged and their sizes and morphologies were comparable to those in PM alloy.<001>texture is relieved and columnar grains tend to become more equiaxed due to static recrystallization process and grain boundary migration events.Significant annealing twins formed in SLM alloy and are clarified as a consequence of recrystallization.Our results provide fundamental understandings for the SLM PM nickel-based superalloy both before and after heat treatment and demonstrate the potential to fabricate this group of alloys using SLM technology.     

A Flexi-PEGDA Upconversion Implant for Wireless Brain Photodynamic Therapy

Near-infrared (NIR) activatable upconversion nanoparticles (UCNPs) enable wireless-based phototherapies by converting deep-tissue-penetrating NIR to visible light. UCNPs are therefore ideal as wireless transducers for photodynamic therapy (PDT) of deep-sited tumors. However, the retention of unsequestered UCNPs in tissue with minimal options for removal limits their clinical translation. To address this shortcoming, biocompatible UCNPs implants are developed to deliver upconversion photonic properties in a flexible, optical guide design. To enhance its translatability, the UCNPs implant is constructed with an FDA-approved poly(ethylene glycol) diacrylate (PEGDA) core clad with fluorinated ethylene propylene (FEP). The emission spectrum of the UCNPs implant can be tuned to overlap with the absorption spectra of the clinically relevant photosensitizer, 5-aminolevulinic acid (5-ALA). The UCNPs implant can wirelessly transmit upconverted visible light till 8 cm in length and in a bendable manner even when implanted underneath the skin or scalp. With this system, it is demonstrated that NIR-based chronic PDT is achievable in an untethered and noninvasive manner in a mouse xenograft glioblastoma multiforme (GBM) model. It is postulated that such encapsulated UCNPs implants represent a translational shift for wireless deep-tissue phototherapy by enabling sequestration of UCNPs without compromising wireless deep-tissue light delivery.     

Characteristics of fat,and saponin and tannin contents of 11 varieties of rambutan (Nephelium lappaceum L.) seed

Rambutan seed is discarded during fruit processing. However, the seed contains a considerable amount of crude fat. Hence, the objective of this study was to determine two anti-nutritional constituents, namely saponin and tannin, and to characterize the fat of the seeds of 11 varieties of rambutan fruit. Results showed that the range of crude fat content is fairly narrow (36.13–39.13 g/100 g dried seeds). The iodine value and free fatty acid content of the fat were 38.50–50.61 g I₂/100 g fat and 0.99–2.18% as oleic acid, respectively. Oleic (33.35–46.64%) and arachidic (26.03–33.27%) acids were the main fatty acids in the fat. HPLC analysis showed that the fat comprised mainly five unknown triacylglycerols (83.94–95.33%). The melting and crystallization curves showed that the fat exhibited four to nine non-distinct peaks. The complete melting and crystallization onset temperatures of the fat were 24.8–50.6°C and 24.1–39.4°C, respectively, while the melting and crystallization enthalpies of the fat ranged from 71.2 to 141.7 J/g and from 60.4 to 88.9 J/g, respectively. At 0°C, the solid fat index of the fat ranged between 87.4% and 91.6% and the fats of some varieties melted completely at human body temperature. The saponin and tannin contents of the seed were 14.27–18.96 mg soya saponin/100 g and 4.40–26.68 mg catechin equivalent/100 g, respectively. Findings showed that rambutan seed fat has potential to be used in various sectors of food industry.     

胶凝剂对彩砂耐磨性的影响研究

以钢渣颗粒为骨料,分别包裹无机胶凝剂、有机胶凝剂和无机-有机复合胶凝剂制备人造彩砂,研究了胶凝剂掺量对彩砂耐磨性的影响,并利用XRD、SEM及TG等方法测试彩砂的结构组成特性。结果表明,随胶凝剂掺量的增加,彩砂磨损率先快速降低后趋于平缓;单独用无机胶凝剂和有机胶凝剂所得彩砂的磨损率均较高,分别为2.39%~0.58%和1.70%~0.80%;采用在无机胶凝剂中掺加小于10%有机胶凝剂配制的复合胶凝剂,彩砂的磨损率显著降低,最低可降至0.05%。复合胶凝剂中无机组分与有机组分发生协同反应是彩砂磨损率显著降低的原因。     

Bidirectional energy storage photovoltaic grid-connected inverter application system

A novel topology of the bidirectional energy storage photovoltaic grid-connected inverter was proposed to reduce the negative impact of the photovoltaic grid-connected system on the grid caused by environmental instability. Using the proposed Inverter as a UPS power supply in case of a grid failure, storage electrical energy and regulating the energy delivered to the grid for reducing the pressure on the grid. A new artificial fish-swarm algorithm and variable step voltage perturbation method were presented to track the maximum power point of the solar panels. Analysis was done to reduce the output ripple of the inverter and sinusoidal pulse width modulation (SPWM) was selected to control the inverter. Model simulation was performed using PSpice software to obtain the volt-ampere characteristic curve of the solar panel output. The solar array simulator was used to verify the effect of maximum power point tracking at different light intensities. The study concludes that the maximum power point tracking (MPPT) efficiency of the bidirectional energy storage photovoltaic grid-connected inverter designed was as high as 99.9%. The distortion rate of the grid-connected current waveform was within 2% and the DC current component was less than 0.5%. The output voltage and power were in full compliance with the grid connection standard.