Orientation Gradients at Boundaries in Micron‐Sized Bicrystals

In micron‐sized Ni bicrystals, after compression tests, orientation gradients are measured by electron back scattering diffraction (EBSD). The results clearly show that EBSD can be used to study dislocation pile‐ups at boundaries. Using bicrystals with single and multiple slip orientations our results show that with decreasing the size of the pillars the orientation changes due to cross‐slip decreases and the orientation changes at the boundary increases. This directly indicates a change in the hardening mechanism when the probability of dislocation–dislocation interaction decreases due to source‐limited plasticity in the bicrystals with diameters below approximately two microns.     

Model-based test case generation and prioritization: a systematic literature review

Software and Systems Modeling - Model-based test case generation (MB-TCG) and prioritization (MB-TCP) utilize models that represent the system under test (SUT) for test generation and...     

Experimentelle und simulative Untersuchungen zum Einfluss der Lageabweichungen im Nocken-Rollen-Kontakt auf die Ventiltriebskräfte

As part of a cooperation project, Daimler AG and the Institute of Machine Elements, Gears, and Transmissions (MEGT) at the Technische Universität Kaiserslautern are carrying out detailed investigations on a valve train with roller lever. The aim of the project is to develop a detailed simulation method that allows the secondary movement of the valve train to be modeled and thus represents an extension of the classic valve train dynamics simulation. This opens up the opportunity to evaluate the processes within the valve train in detail in the early stages of the product development process. This report introduces the validation of the methodology based on experimental results. First, the focus is placed on the cam-roller contact, which induces the secondary movement of the valve train. This movement takes place in the axial direction of the camshaft so that the validation takes place on the basis of the measured force in this direction. The force is dependent on the load, i.?e. the combination of speed and normal force, as well as the angular misalignments between cam and roller. Following the validation of the detailed modeling of the cam-roller contact, the gained knowledge is transferred into the extended valve train simulations. Finally the valve train simulation is validated.     

Electrospinning and Imaging

Polymer processing via electrospinning is a cost effective and scalable method for preparing nanofibers with industrial, electrical, and biomedical applications, particularly tissue engineering and drug delivery. Characterization methods for these fibers include microscopy techniques for vitro surface morphology information, spectroscopy methods to determine in vitro chemical composition, and medical imaging tools for in vivo assessment of morphology and efficacy of implanted material. The focus of this paper is be on recent applications for electrospun nanofibers, in vitro characterization methods, and medical imaging modalities that can be used for in vivo assessment of the fibers, as well as insights in how to adapt existing techniques toward the characterization of electrospun materials.     

Quantification of 1,8‐cineole and of its metabolites in humans using stable isotope dilution assays

The metabolism of 1,8‐cineole after ingestion of sage tea was studied. After application of the tea, the metabolites 2‐hydroxy‐1,8‐cineole, 3‐hydroxy‐1,8‐cineole, 9‐hydroxy‐1,8‐cineole and, for the first time in humans, 7‐hydroxy‐1,8‐cineole were identified in plasma and urine of one volunteer. For quantitation of these metabolites and the parent compound, stable isotope dilution assays were developed after synthesis of [²H₃]‐1,8‐cineole, [9/10‐²H₃]‐2‐hydroxy‐1,8‐cineole and [¹³C,²H₂]‐9‐hydroxy‐1,8‐cineole as internal standards. Using these standards, we quantified 1,8‐cineole by solid phase microextraction GC‐MS and the hydroxyl‐1,8‐cineoles by LC‐MS/MS after deconjugation in blood and urine of the volunteer. After consumption of 1.02 mg 1,8‐cineole (19 μg/kg bw), the hydroxycineoles along with their parent compound were detectable in the blood plasma of the volunteer under study after liberation from their glucuronides with 2‐hydroxycineole being the predominant metabolite at a maximum plasma concentration of 86 nmol/L followed by the 9‐hydroxy isomer at a maximum plasma concentration of 33 nmol/L. The parent compound 1,8‐cineole showed a low maximum plasma concentration of 19 nmol/L. In urine, 2‐hydroxycineole also showed highest contents followed by its 9‐isomer. Summing up the urinary excretion over 10 h, 2‐hydroxycineole, the 9‐isomer, the 3‐isomer and the 7‐isomer accounted for 20.9, 17.2, 10.6 and 3.8% of the cineole dose, respectively.     

A process for the production of a diacylglycerol‐based milk fat analogue

We propose a novel process for the production of a DAG‐rich acylglycerol mixture derived from milk fat. This product has potentially interesting nutritional properties, derived from both its high content of DAG and of short‐chain fatty acids (FAs). The proposed process consists of three steps: lipase‐catalysed partial ethanolysis of milk fat, extraction of the by‐product fatty acid ethyl esters (FAEEs) using supercritical carbon dioxide (SC‐CO₂) and isomerization of DAG to increase the proportion of 1,3‐DAG. The experimental investigation of the process steps was done using milk fat and trilaurin. Several lipases were tested for maximizing the percentage of DAG in the acylglycerol mixture produced by ethanolysis. The selectivity of the chosen lipase was such that the produced AG mixture was enriched in short‐chain FAs in relation to the original milk fat. FAEEs were completely extracted from the ethanolysis mixture by SC‐CO₂. In the final process step, we explored the reaction conditions for facilitating acyl migration in the DAG mixture, so that the equilibrium proportion of 1,3‐DAG (～64%) was attained. Our results set the basis for the development of a simple process for the production of a DAG‐rich milk fat analogue.     

Optically detected magnetic resonance of thiol-capped CdTe nanocrystals

The optical properties of thiol-stabilized CdTe nanocrystals have been examined. The thiol groups -SR generate a CdS shell at the interface, leading to a CdTe/CdS core—shell structure. The present paper describes our efforts to identify the influence of the CdTe–SR interface on the optical properties of the nanocrystals, utilizing photoluminescence and optically detected magnetic resonance (ODMR) spectroscopy. The photoluminescence spectrum consists of an excitonic peak, overlapped by a broad band at lower energies. The ODMR spectrum, in the spectral regime of the broad band, showed two resonance signals. They are associated with a trapped hole at an anisotropic site of a cadmium vacancy at the Cd–SR interface and an electron in the conduction band.     

Removal of heavy metals from wastewater using magnetic nanocomposites: Analysis of the experimental conditions

This contribution provides insight on the elimination of heavy metals from water resources using magnetic separation. Nanocomposites based on magnetite and chitosan were prepared. An exhaustive characterization of the magnetic adsorbents was developed. Adsorption assays were performed in batch using Cu, Zn, Cd, and Cr as model heavy metals. The efficiency of magnetic adsorbents followed the order: Cu > Cd > Zn > Cr, with maximum values of 188, 159, 72, and 46 mg of Me/g of nanocomposite, respectively. Kinetics and mechanistic issues were studied. The magnetic materials were efficient for five to eight cycles using Cu(II),Cd(II), and Cr(VI).