Enhancement of islanding-detection of distributed generation systems via wavelet transform-based approaches

In this paper, a wavelet transform-based approach is proposed to detect the occurrence of islanding events in distributed generation systems. Thanks to time–frequency localization capabilities exhibited by wavelet transform, the approach embedded with this transform technique has grasped the appearance of the islanding event in a highly effective manner. Moreover, for those regions which are in need of a better visualization, the proposed approach would serve as an efficient aid such that the mains power disconnection can be better distinguished. To validate the feasibility of this approach, the method has been validated through several scenarios. Test results supported the effectiveness of the method for the application considered.     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Use of the ARPE-19 cell line as a model of RPE polarity: basolateral secretion of FGF5

PURPOSE: To determine the polarity of fibroblast growth factor 5 (FGF5) secretions from retinal pigment epithelium (RPE) cells and to examine the viability and utility of the ARPE-19 cell line as a model for the study of RPE polarity. METHODS: Influenza infection and adenovirus-mediated gene transfer were used to deliver and express genes encoding influenza hemagglutinin (HA), p75-NTR (a neurotrophin receptor), low-density lipoprotein (LDL) receptor (LDLR), and FGF5 in confluent monolayers of ARPE-19 cells. The localization of HA, p75-NTR, and LDLR was determined by confocal microscopy. Domain selective biotinylation assays were used to quantitatively determine the polarities of p75-NTR and LDLR. The secretion of FGF5 into the apical and basal media of ARPE-19 cultures was examined by immunoblot analysis of conditioned media. RESULTS: Hemagglutinin and p75-NTR were found to be localized on the apical surface of infected and transduced ARPE-19 cells. In contrast, LDLR was associated preferentially with the basolateral membrane of ARPE-19 cells. Biotinylation studies indicated that 84% of p75-NTR was present on the apical surface, and 79% of LDLR was basolaterally polarized. Over the course of 6 hours, more than 90% of the total secreted FGF5 protein accumulated in the basolateral media. CONCLUSIONS: ARPE-19 cells exhibit a polarized distribution of cell surface markers when examined by either confocal microscopy or surface-labeling assays. This indicates that the ARPE-19 cell line is a valid model for studies of RPE cell polarity. FGF5, a secreted protein normally produced by RPE cells, is accumulated preferentially in the basal media after only 6 hours, suggesting that it is vectorially secreted from the basolateral surface of ARPE-19 cells.     

Reverse osmosis separations of polyethylene glycols in dilute aqueous solutions using porous cellulose acetate membranes

Reverse osmosis separations of eight polyethylene glycol (PEG) solutes in the average molecular weight range of 200 to 6750 in single-solute dilute aqueous solutions have been studied using porous cellulose acetate membranes at the operating pressures of 50, 75, and 100 psig. Diffusivity data for the above PEG solutes have also been obtained from experimental data on intrinsic viscosities. From an analysis of all experimental data, numerical values for the parameters representing the polar (?ΔΔG/RT), steric (δ^*ΣE_s), and nonpolar (ω^*Σs^*) forces governing reverse osmosis separations of PEG solutes have been generated. These numerical values are useful for precise characterization of cellulose acetate membranes for whose specifications sodium chloride is not the appropriate reference solute because of its low or practically negligible separation under reverse osmosis operating conditions. This work also illustrates that solute separation in reverse osmosis can predictably increase or decrease with increase in operating pressure depending on experimental conditions.     

Influence of Potassium on Preparation and Performance of PTC Resistors

Different amounts of K₂CO₃ were added to (Ba,Sr)TiO₃-based PTCR (positive temperature coefficient of resistance) ceramics to investigate their influence on the microstructural and electrical properties. Experimental results showed that the incorporation of K acted as an A-site acceptor-type dopant. In addition to enhancing discontinuous grain growth, the increase of K₂CO₃ was found to raise the room-temperature resistivity which was dominated by grain-boundary resistance rather than grain resistance. By adjusting to a suitable amount of donor dopant, the inherent contamination of K in raw material can be compensated to achieve a high-quality PTC resistor.     

Extending 3D Lucas–Kanade tracking with adaptive templates for head pose estimation

The Lucas–Kanade tracker (LKT) is a commonly used method to track target objects over 2D images. The key principle behind the object tracking of an LKT is to warp the object appearance so as to minimize the difference between the warped object’s appearance and a pre-stored template. Accordingly, the 2D pose of the tracked object in terms of translation, rotation, and scaling can be recovered from the warping. To extend the LKT for 3D pose estimation, a model-based 3D LKT assumes a 3D geometric model for the target object in the 3D space and tries to infer the 3D object motion by minimizing the difference between the projected 2D image of the 3D object and the pre-stored 2D image template. In this paper, we propose an extended model-based 3D LKT for estimating 3D head poses by tracking human heads on video sequences. In contrast to the original model-based 3D LKT, which uses a template with each pixel represented by a single intensity value, the proposed model-based 3D LKT exploits an adaptive template with each template pixel modeled by a continuously updated Gaussian distribution during head tracking. This probabilistic template modeling improves the tracker’s ability to handle temporal fluctuation of pixels caused by continuous environmental changes such as varying illumination and dynamic backgrounds. Due to the new probabilistic template modeling, we reformulate the head pose estimation as a maximum likelihood estimation problem, rather than the original difference minimization procedure. Based on the new formulation, an algorithm to estimate the best head pose is derived. The experimental results show that the proposed extended model-based 3D LKT achieves higher accuracy and reliability than the conventional one does. Particularly, the proposed LKT is very effective in handling varying illumination, which cannot be well handled in the original LKT.