Morphology and characterization of conductive films based on polyaniline‐coated polystyrene latexes

The polyaniline (PANI)‐coated polystyrene (PS) latexes were synthesized, and the electrically conductive films were prepared thereafter. The weight ratio of PANI was 5%. Thermal analysis of the latices was performed using DSC and TGA. In this study, the electrically conductive films were prepared above the PS glass transition temperature (T_g). During the film formation, the effects of the annealing temperature and atmosphere (air or N₂) on the film resistance were investigated. In addition, the film morphology was observed utilizing scanning electron microscopy. The film resistance decreased in the initial heating stage due to the increasing temperature and the compaction of film. Then the film resistance increased with further annealing due to the aging of PANI. Typically, the film resistance was about 6000 Ω/sq, and the conductivity was 0.3 S/cm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5406–5413, 2006     

Surface modification and physical properties of various UHMWPE‐fiber‐reinforced modified epoxy composites

Two surface modification methods—plasma surface treatment and chemical agent treatment—were used to investigate their effects on the surface properties of ultrahigh‐molecular‐weight polyethylene (UHMWPE) fibers. In the analyses, performed using electron spectroscopy for chemical analysis, changes in weight, and scanning electron microscope observations, demonstrated that the two fiber‐surface‐modified composites formed between UHMWPE fiber and epoxy matrix exhibited improved interfacial adhesion and slight improvements in tensile strengths, but notable decreases in elongation, relative to those properties of the composites reinforced with the untreated UHMWPE fibers. In addition, three kinds of epoxy resins—neat DGEBA, polyurethane‐crosslinked DGEBA, and BHHBP‐DGEBA—were used as resin matrices to examine the tensile and elongation properties of their UHMWPE fiber‐reinforced composites. From stress/strain measurements and scanning electron microscope observations, the resin matrix improved the tensile strength apparently, but did not affect the elongation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 655–665, 2007     

Influence of dietary long-chain PUFA on premature baboon lung FA and dipalmitoyl PC composition

One of the major survival challenges of premature birth is production of lung surfactant. The lipid component of surfactant, dipalmitoyl PC (DPPC), increases in concentration in the period before normal term birth via a net shift in FA composition away from unsaturates. We investigated the influence of dietary DHA and arachidonic acid (AA) on lung FA composition and DPPC concentration in term and preterm baboons. Pregnant animals/neonates were randomized to one of four groups: breast-fed (B), term formula-fed (T⁻), preterm formulafed (P⁻), and preterm fed formula supplemented with DHA-AA (P⁺). Breast milk contained 0.68%wt DHA and the P⁺ group formula contained 0.61%wt DHA. In the preterm groups (P⁻ and P⁺), pregnant females received a course of antenatal corticosteroids. At the adjusted age of 4 wk, neonate lung tissue was harvested, and FA composition and DPPC were analyzed. Palmitate was ∼28%wt of lung total FA and no significant differences were found among the four treatment groups. In contrast, DPPC in the B group lung tissue was significantly greater than DPPC in the unsupplemented groups, but not compared with the P⁺ group. The B and P⁺ groups were not significantly different in DHA and AA, but were different compared with the unsupplemented (T, P⁻) groups. These results indicate that LCP supplementation increases lung DHA and AA, without compromising overall lung 16∶0 or DPPC. The shift in FA composition toward greater unsaturation in the groups consuming LCP supported improved surfactant lipid concentration in preterm neonate lungs.     

Longitudinal test of ePortfolio continuous use: an empirical study on the change of students’ beliefs

The electronic portfolio (ePortfolio) is learner-centred, and its effectiveness depends on the learners’ long-term use. Thus, it is proper to conduct the study from the learners’ perspectives. Currently, most research on the use of the ePortfolio is in the form of cross-sectional studies, and it is difficult to find the reasons for the changes in students’ beliefs with regard to the long-term use of the ePortfolio. Based on the longitudinal test, this study explained the students’ continuous use of ePortfolio and the changes in their beliefs. With 122 samplers in the adoption–continuous stage (t ₁–t ₂) and 117 samplers in the continuous stage (t ₂–t ₃), this study demonstrates that in continuous use stage (t ₂–t ₃), perceived ease of use still influences the users’ perceived usefulness (PU) and attitude towards the ePortfolio. Attribution significantly moderates the users’ beliefs from the adoption stage (t ₁) to the continuous use stage (t ₂). However, the moderating effect of attribution in the continuous use stage (t ₂–t ₃) is insignificant; satisfaction and attribution are the key factors driving the users’ continuous intention towards the ePortfolio rather than PU and attitude. Meanwhile, satisfaction and attribution will change because of the users’ expectation disconfirmation, and it will influence the users to continue using ePortfolio.     

Cross-national differences in individual knowledge-seeking patterns: a climato-economic contextualization

Electronic Knowledge Repository (EKR) is one of the most commonly deployed knowledge management technologies, yet its success hinges upon employees’ continued use and is further complicated in today’s multinational context. We integrate multiple theoretical linkages into a research model, conceptualizing knowledge-seeking as an instrumental behavior, adopting the technology acceptance model to characterize the individual-level continued EKR knowledge-seeking behavioral model, and drawing on the climato-economic theory to explain cross-national behavioral differences. Using hierarchical linear modeling (HLM), we test the model with data from 1352 randomly sampled knowledge workers across 30 nations. We find that two national-level factors, climate harshness and national wealth, interactively moderate the individual-level relationship between perceived usefulness (PU) and behavioral intention (BI) to continue seeking knowledge from EKR, such that the difference in the strength of this relationship is larger between poor-harsh and poor-temperate nations than between rich-harsh and rich-temperate nations. We find similar cross-level cross-national differences for the link between perceived ease of use (PEOU) and PU but not for the link between PEOU and BI. Implications for research and practice are discussed.     

Understanding User Satisfaction With Instant Messaging: An Empirical Survey Study

The current article examines user satisfaction with instant messaging in building and maintaining social relationships with friends, family members, and others. The research model integrates motivation theory with media capacity theories to explain how the attributes of media capacity (e.g., social presence and media richness) and users' intrinsic and extrinsic motivations toward using instant messaging influence user satisfaction. Data were collected from a sample of 247 Chinese university students via an online survey. The results suggest that perceived enjoyment, perceived social presence, and perceived usefulness are key to user satisfaction. Perceived social presence and perceived media richness are positively associated with perceived enjoyment. It was also found that perceived enjoyment, perceived social presence, and perceived media richness have significant effects on perceived usefulness. Of interest, perceived enjoyment and perceived social presence have stronger effects on user satisfaction than perceived usefulness.     

Domain structure of the Fib-1 and Fib-2 regions of human fibronectin. Thermodynamic properties of the type I finger module

The stability of the Fib-1 (29 kDa) and Fib-2 (19 kDa) fragments of human fibronectin as well as several different subfragments and isolated type I "finger" modules were studied under various solvent conditions by differential scanning calorimetry and fluorescence spectroscopy. It was established that all fibronectin fingers constitute independently folded domains whose melting temperatures range from 54 to 108 degrees C. The difference between heat capacities of the native and denatured states (delta Cp) is low, about 0.03 cal/K-g, which is consistent with the relatively low percentage of hydrophobic amino acids and the consequent small change in non-polar surface area exposed to the solvent upon denaturation. The free energy of unfolding at 25 degrees, as calculated from the calorimetric data or measured directly by titration with GdmSCN is also small, in the range of 2.4 to 6.7 kcal/mol. The small delta G value and its flat dependence on temperature (determined by delta Cp) translates the small variations in delta G between fingers into large variations in tm. The small value of delta G also indicates that finger modules are structurally rather fragile which may account for their sensitivity to proteolysis; almost any cleavage within either of the two disulfide loops destroys the cooperative structure and abolishes the corresponding melting transition. The fact that some fingers exhibit large decreases in tm upon separation from more stable neighbors with which they interact can also be viewed as a consequence of the low values of delta G and delta Cp.