Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Reverse osmosis separations of polyethylene glycols in dilute aqueous solutions using porous cellulose acetate membranes

Reverse osmosis separations of eight polyethylene glycol (PEG) solutes in the average molecular weight range of 200 to 6750 in single-solute dilute aqueous solutions have been studied using porous cellulose acetate membranes at the operating pressures of 50, 75, and 100 psig. Diffusivity data for the above PEG solutes have also been obtained from experimental data on intrinsic viscosities. From an analysis of all experimental data, numerical values for the parameters representing the polar (?ΔΔG/RT), steric (δ^*ΣE_s), and nonpolar (ω^*Σs^*) forces governing reverse osmosis separations of PEG solutes have been generated. These numerical values are useful for precise characterization of cellulose acetate membranes for whose specifications sodium chloride is not the appropriate reference solute because of its low or practically negligible separation under reverse osmosis operating conditions. This work also illustrates that solute separation in reverse osmosis can predictably increase or decrease with increase in operating pressure depending on experimental conditions.     

Extending 3D Lucas–Kanade tracking with adaptive templates for head pose estimation

The Lucas–Kanade tracker (LKT) is a commonly used method to track target objects over 2D images. The key principle behind the object tracking of an LKT is to warp the object appearance so as to minimize the difference between the warped object’s appearance and a pre-stored template. Accordingly, the 2D pose of the tracked object in terms of translation, rotation, and scaling can be recovered from the warping. To extend the LKT for 3D pose estimation, a model-based 3D LKT assumes a 3D geometric model for the target object in the 3D space and tries to infer the 3D object motion by minimizing the difference between the projected 2D image of the 3D object and the pre-stored 2D image template. In this paper, we propose an extended model-based 3D LKT for estimating 3D head poses by tracking human heads on video sequences. In contrast to the original model-based 3D LKT, which uses a template with each pixel represented by a single intensity value, the proposed model-based 3D LKT exploits an adaptive template with each template pixel modeled by a continuously updated Gaussian distribution during head tracking. This probabilistic template modeling improves the tracker’s ability to handle temporal fluctuation of pixels caused by continuous environmental changes such as varying illumination and dynamic backgrounds. Due to the new probabilistic template modeling, we reformulate the head pose estimation as a maximum likelihood estimation problem, rather than the original difference minimization procedure. Based on the new formulation, an algorithm to estimate the best head pose is derived. The experimental results show that the proposed extended model-based 3D LKT achieves higher accuracy and reliability than the conventional one does. Particularly, the proposed LKT is very effective in handling varying illumination, which cannot be well handled in the original LKT.     

Detection of OFDM Signals in Fast-Varying Channels With Low-Density Pilot Symbols

In fast-varying channels, an orthogonal frequency-division multiplexing system needs to insert denser pilot symbols among transmitted symbols in tracking the variation of a channel. However, using denser pilot symbols reduces transmission throughput. In this paper, we propose a pseudopilot algorithm for data detection in fast-varying channels without increasing the pilot density. Our algorithm is based on a regressional model-based least-squares-fitting approach. Within a block of received symbols, we select some data symbols and regard them as pseudopilot symbols. The receiver considers all the possible patterns of the pseudopilots and associates each of them with a data sequence and a corresponding metric. The associated data sequence, whose metric is minimum, is selected as the detected data sequence. Our algorithm is not based on a decision-directed or decision-feedback architecture because the pseudopilots do not come from any detected symbols. The proposed algorithm needs to search all the possible patterns of the pseudopilots, and the complexity may increase with the number of pseudopilots and constellation size. To reduce the number of search, we further propose two modified approaches. The simulation results show that the performance of the proposed algorithms could approach a bit-error probability lower bound that is obtained by letting the receiver know the true values of the pseudopilots. Compared with the linear interpolation method, the proposed algorithm shows obvious improvement in fast-varying channels. The proposed modified approaches could also effectively reduce the number of search while maintaining the performance. We also give the complexity analysis of the proposed algorithm and an approach to determine the degree of the regression polynomial.     

Thin-film reactions during diffusion soldering of Cu/Ti/Si and Au/Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> with Sn interlayers

The multilayer thin-film systems of Cu/Ti/Si and Au/Cu/Al₂O₃ were diffusion-soldered at temperatures between 250°C and 400°C by inserting a Sn thin-film interlayer. Experimental results showed that a double layer of intermetallic compounds (IMCs) η-(Cu_0.99Au_0.01)₆Sn₅/δ-(Au_0.87Cu_0.13)Sn was formed at the interface. Kinetics analyses revealed that the growth of intermetallics was diffusion-controlled. The activation energies as calculated from Arrhenius plots of the growth rate constants for (Cu_0.99Au_0.01)₆Sn₅ and (Au_0.87Cu_0.13)Sn are 16.9 kJ/mol and 53.7 kJ/mol, respectively. Finally, a satisfactory tensile strength of 132 kg/cm² could be attained under the bonding condition of 300°C for 20 min.     

A low-phase-noise K-band CMOS VCO

A novel circuit topology for low-phase-noise voltage controlled oscillators (VCOs) is presented in this letter. By employing a PMOS cross-coupled pair with a capacitive feedback, superior circuit performance can be achieved especially at higher frequencies. Based on the proposed architecture, a prototype VCO implemented in a 0.18-/spl mu/m CMOS process is demonstrated for K-band applications. From the measurement results, the VCO exhibits a 510-MHz frequency tuning range at 20GHz. The output power and the phase noise at 1-MHz offset are -3dBm and -111dBc/Hz, respectively. The fabricated circuit consumes a dc power of 32mW from a 1.8-V supply voltage.