高精度智能转速测量模板的设计

介绍了一种利用高性能的16位单片机80C196KC进行转速实时高精度的测量方法，阐述了如何通过CAN总线实现与微机通讯；详细描述了硬件电路的设计，并给出了软件程序框图。     

初轧机主传动系统扭转自激振动的稳定性

用变量摄动法对初轧机主传动系统扭转自激振动的稳定性进行了初步研究，讨论了稳定性条件，为初轧机打滑状态的诊断、监测提供了参考依据。     

A novel in situ synthesis of dicalcium phosphate dehydrate nanocrystals in biodegradable polymer matrix

In the paper, we found a novel method to synthesize dicalcium phosphate dehydrate (DCPD) nanocrystals by in situ reaction in biodegradable PDLLA matrix. Calcium hydrid was selected as calcium source of DCPD, which is different from general methods. The method is not only simple and effective to synthesize Ca–P particles, but also can avoid the aggregation of inorganic nanoparticles in the course of their being dispersed into polymer matrix.     

超低渗广谱油层保护技术在板深51区块的应用

板深51区块存在压力敏感地层，在非目的层井段存在大段高渗低压砂岩，而目的层又属于高压低渗地层，属于难采油气田。室内进行的砂床滤失量、砂床封堵带承压能力、岩心封堵带的承压能力及油气层保护效果实验表明，在超低渗钻井液中增加固相含量，能够提高超低渗透膜结构强度，提高地层承压能力，降低砂床侵入深度，增强保护油气层效果，而且有选择性地增加有用固相效果更佳。基于这一理论，研究成功了超低渗广谱屏蔽暂堵油层保护技术，并在板深51区块长22—15井和长23—17K井进行了试验应用。该技术的关键是依据地层特性确定复配暂堵剂。长22-15井和长23-17K井射孔后未经过压裂、酸化、排液处理，获自喷高产，尤其是长22-15井形成自喷油流，创油田单井试采产量最高记录。应用结果表明，超低渗广谱保护油气层钻井液技术封堵隔层的承压能力强，很大程度地提高了漏失层的承压能力和破裂压力，较好地解决了含多套压力层系长裸眼段钻井过程中发生的漏失、井喷、卡钻、油气层保护等技术难题。     

锅炉压力容器用SA515Gr70钢的组织与性能研究

通过钢的成分的设计，研制了一种用于制造锅炉汽包和压力容器的奥氏体粗晶粒钢，这种钢经一定热处理后，可获得高强度高韧性的使用要求。     

铝电解电容器用橡皮塞中铁的测定

主要研究了用硫氰酸钾作显色剂，用分光光度法测定橡皮塞中铁含量的方法。并对国产和进口橡皮塞做了比较，为铝电解电容器质量水平的提高提供一条新思路。     

A Study of The Moisture-Uptake Kinetics of a Hygroscopic Pharmaceutical Powder

The moisture-uptake kinetics of a hygroscopic powder, sodium heparin contained in a cylindrical container, was determined using a novel moisture-uptake measuring device under a constant convective air flow. The amount of moisture uptake increased with the increase in the relative humidity of the air. The effect of powder-bed height on the total amount of moisture uptake was found to be significant only at the highest relative humidity (75%) evaluated in this study. However, the percent of weight increase of the powder as a result of moisture uptake decreases as the height of the powder bed increases. The results of this study are explained by the dynamic nature of the moisture-uptake process associated with the instrument.     

聚合物分解法制备微波介质陶瓷粉体的研究

对采用聚合物分解（Ｐｅｃｈｉｎｉ）法制备ＭｇＴｉＯ＿３粉体进行了研究。通过对聚合中间产物进行红外光谱分析，研究了聚合物分解法制备ＭｇＴｉＯ＿３陶瓷粉体的聚合反应过程及产物。并与用传统固相反应法制备粉体工艺进行对比．从而证明用聚合物分解法可获得单一ＭｇＴｉＯ＿３相材料．并可降低粉体的煅烧温度。