Growth and optical properties of Er,Yb:YAl3(BO3)4 crystal

Single crystal of erbium, ytterbium-codoped yttrium aluminum tetraborate Er,Yb:YAl₃(BO₃)₄(Er,Yb:YAB) has been grown by the flux method. The absorption spectrum in the visible and NIR regions of Er,Yb:YAl₃(BO₃)₄ crystal are measured at room temperature and fluorescence spectrum of Er,Yb:YAl₃(BO₃)₄ crystal are also measured at room temperature, excited by 976 nm laser. Not only the strong NIR emission peaks located at 1548 nm was observed, but also the visible up-conversion luminescence has been found. The specific heat of the Er/Yb:YAB crystal at room temperature is 0.81 J/g °C.     

Symmetry in electron diffractions from helical structures

In this work, we elucidate the regular rule of the symmetry in electron diffraction patterns from helical structures. It is affected by the value of the dominating Bessel function orders for the layer lines and relative orientation of the samples with respect to the electron beam. For Single-Walled Carbon nanotubes (SWCNTs), we use analytic analysis and computer simulations to demonstrate that the 2mm symmetry of the electron diffraction may break down not only from an achiral SWCNT, but also from a chiral SWCNT. Also, the simulation work for B-DNA is presented to corroborate the theoretical analysis.     

林区环境因素与CORS测量精度的相关性分析

在林区环境下的碎部测量中存在一定的障碍物对CORS信号进行干扰,影响CORS信号的站间传播。为研究林区环境因素与CORS测量精度之间的关系,通过获取林区优势树种的叶面积指数(LAI)和CORS测量精度等要素,利用SPSS软件分析其相关性。结果表明：不同优势树种的LAI值与CORS测量精度秩相关系数r_s>0.8,在p<0.01下呈强相关性,树冠投影面积与CORS测量精度的秩相关系数r_s>0.5,在p<0.01下呈现中等相关,而树冠高度和地形与CORS测量精度未得出相关性。     

柔性直流输电技术在风电场并网中的应用探讨

柔性直流输电是在电压源换流器技术和全控型功率器件的基础上发展起来的,通过电压源换流器技术,可以控制系统中的无功功率、抑制并网公共点的电压波动。文章分析了电压源换流器（VSC）的基本模型,研究了换流站无功功率控制和电压控制策略对改善并网风电场电压稳定性的作用,阐述了风电场并网对电网的可靠性和稳定性等方面的影响。     

主题模式教学中的动机强度研究

本文采用定量的研究方法,从动机强度的角度分析了主题模式在大学英语教学中的效果.研究通过实验班和对照班学生动机强度层面的对比,发现主题模式教学对学生的动机强度产生了影响.学生在围绕主题开展的教学中更为主动地进行语言学习,尤其体现在听说能力方面.同时研究还发现学生在新模式下课堂教学的参与性更高,对教学环境更加满意.     

磺化聚苯乙烯/聚乙烯醇交联膜的制备与性能

以磺化度为75%的磺化聚苯乙烯(SPS)和聚乙烯醇(PVA)为原料,按一定的配比共混后浇铸成膜,在程序升温的过程中进行热交联,通过控制不同交联时间得到不同交联密度的交联膜.考察了交联膜的离子交换容量(IEC)、吸水率、溶胀性和尺寸稳定性;利用原子力显微镜和交流阻抗仪对交联膜的表面形貌及电导率进行了表征.结果表明:交联膜的IEC值略有降低;吸水率和溶胀度得到了很好的控制,具有较好的尺寸稳定性;膜表面出现了明显的亲水相和憎水相相分离,且亲水相微区的聚集尺寸和连续性随交联时间的长短而变化;随交联时间的延长,交联膜的电导率值略有下降,但交联后膜的室温电导率仍高于0.01 S/cm.     

Myoglobin/gold nanoparticles/carbon spheres 3-D architecture for the fabrication of a novel biosensor

A novel biosensor based on a myoglobin/gold nanoparticles/carbon spheres (Mb-AuNPs-CNs) 3-D architecture bioconjunction has been fabricated for the determination of hydrogen peroxide (H₂O₂). Cyclic voltammetry (CV), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to characterize the bioconjunction of the AuNPs-CNs with Mb. Experimental results demonstrate that the AuNPs-CNs hybrid material is more effective in facilitating electron transfer of the immobilized enzyme than CNs alone, which can be attributed to the unique nanostructure and larger surface area of the bioconjunction. The biosensor displayed good performance for the detection of H₂O₂ with a wide linear range from 0.28 μmol/L to 116.5 μmol/L and a detection limit of 0.12 μmol/L. The Michaelis-Menten constant K _M^app value was estimated to be 0.3 mmol/L. The resulting biosensor exhibited fast amperometric response, and good stability, reproducibility, and selectivity to H₂O₂. This article is published with open access at Springerlink.com     

网络环境下高职学生英语自主学习探究

从自主学习的重要性出发,论述了网络环境下学生自主学习的内涵,以及自主探究学习模式的评价标准,从而探究网络环境下提高高职学生自主学习能力的有效途径.     

Architecture engineering of hierarchically porous chitosan/vacuum-stripped graphene scaffold as bioanode for high performance microbial fuel cell

The bioanode is the defining feature of microbial fuel cell (MFC) technology and often limits its performance. In the current work, we report the engineering of a novel hierarchically porous architecture as an efficient bioanode, consisting of biocompatible chitosan and vacuum-stripped graphene (CHI/VSG). With the hierarchical pores and unique VSG, an optimized bioanode delivered a remarkable maximum power density of 1530 mW m(-2) in a mediator-less MFC, 78 times higher than a carbon cloth anode.