Performance characteristics of a new structured packing

A new structured packing using carbon fibres, called Sepcarb^® 4D, is presented. This packing has several attractive properties, such as high voidage (ε=94%) and high effective area (a=420 m² m^?3). These properties are advantageous for packing used as a gas–liquid contactor for separation units. To determine the internal characteristics of this packing, we performed several experiments using a 150-mm-internal-diameter column. Firstly, hydrodynamics experiments were conducted using an air–water counter current flow to determine the pressure drop (for both dry and wet packing) and flooding point. Secondly, the mass transfer efficiency was determined in terms of HETP (height equivalent to theoretical plate) by total reflux experiments with an n-heptane/cyclohexane mixture at atmospheric pressure. Hydrodynamic performance and mass transfer efficiency were compared with those of packings generally used in distillation and absorption.     

Additive manufacturing of alumina parts by indirect selective laser sintering and post processing

Innovative powder preparation and post-processing techniques can be employed to obtain high density ceramic parts by means of indirect selective laser sintering. Thermally induced phase separation (TIPS) was used to produce polymer and polymer–ceramic composite particles. The effect of polymer concentration, cooling rate, stirring and alumina particles on polymer and polymer–ceramic composite particles was investigated. Homogeneous spherical alumina–polypropylene (PP) composite powder was synthesized by TIPS for selective laser sintering (SLS). Green Al₂O₃–PP component parts with a density of 34% could be produced by conventional SLS of the polymer under optimized laser power, scan speed, scan spacing and powder preheating temperature. Various post-processing techniques like pressure infiltration (PI), warm isostatic pressing (WIPing) or a combination of both were applied to increase the green density of the Al₂O₃–PP SLM parts. Infiltrating the open porosity green SLS parts with a 30 vol% alumina-powder based ethanol suspension allowed to increase the sintered density, i.e. after polymer debinding and pressureless sintering in air at 1600 °C, from 38 to 64% of the theoretical density (TD). WIPing of the SLS and SLS/infiltrated green parts at 135 °C and 64 MPa allowed raising the green density up to 93 and 83% TD and a sintered density up to 89 and 88% TD, respectively.     

Contribution to the textural characterisation of Filtrasorb 400 and other commercial activated carbons commonly used for water treatment

The textural characteristics of three commercial activated carbons, Filtrasorb 400 (F400), Industrial React High Affinity and Picabiol, commonly used in water treatment, are reinvestigated. Nitrogen physisorption isotherms are determined in the range P/P ₀ = [4 × 10⁻⁷–0.998] and processed using BET, α_S (Sing), Dubinin–Radushkevich and Density Functional Theory methods. In addition, fractal dimensions are determined by the Frenkel–Halsey–Hill procedure. Since F400 is often considered as a reference material in studies on the adsorption of solutes in aqueous solutions, a review of the textural characteristics of this carbon is carried out. The results obtained in this work using the different methods are consistent and a critical crossed comparison of these results allows discussing the limitations of the methods used. In particular, the impact of the P/P ₀ range considered on S _BET value is examined. In addition, the accuracy of the BET specific surface area is assessed in the light of information from recent literature.     

In-situ fabrication of polyacrylate-silver nanocomposite through photoinduced tandem reactions involving eosin dye

A silver-acrylate nanocomposite was prepared using a novel one-pot strategy involving eosin dye as visible sensitizer and an amine derivative as radicals' source. The mechanism highlighted by steady state photolysis and time-resolved absorption spectroscopy lies on the initial formation of a strong ion-pair complex between eosin and Ag⁺. Upon visible irradiation, the excited triplet state of the metal complex efficiently abstracts a hydrogen atom from the amine and produces an α-aminoalkyl radical. In acrylate monomer matrix, such a strong reactive species initiates a free radical photopolymerization and also provides the reduction of the silver cation. Through this ‘in-situ’ fabrication method, the kinetics formation of the nanocomposite and its detailed structural analysis are characterized by UV-visible, real-time FTIR absorption spectroscopy and by transmission electron microscopy.     

Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study

Bipolar plate represents a key component of Proton Exchange Membrane Fuel Cell (PEFC) with several essential functions, among them the electric connection of elementary cells. Usually made of graphite, this component is studied worldwide in order to develop a commercially viable alternative: different ways have been being investigated, and to date, despite corrosion issues, stainless steel (SS) appears as a good candidate material, but its Electrical Contact Resistance (ECR) can reach unacceptable values when exposed to PEFC environment. This paper offers a comprehensive study of the parameters acting on ECR when using uncoated SS in PEFC: roughness, which influences the surface contact area with carbon baking, bulk composition of the alloy, which influences only partly the nature of passive films, and the composition and structure of passive films, strongly modified by surface treatments and ageing conditions.     

The effect of a scattering layer on the edge output of a luminescent solar concentrator

The effect of adding white scattering layers to the bottom side of luminescent solar concentrator waveguides is evaluated. It is determined that adding a rear scatterer separated from the waveguide by an air gap results in a large increase of energy output from the waveguides, and this enhancement persists over long (>30 cm) distances, although the magnitude of the enhancement decreases with distance. An attached scatterer resulted in the greatest improvement of light output for short (∼6 cm) distances, but actually reduced edge emissions over longer distances. We provide estimates for the relative contribution of dye-emitted light and scattered light to the total waveguide emission, as well as distinguishing between the contributions of direct and indirect scattering of light to the total output as a function of dye content of the waveguides.     

A hierarchical approach for planning a multisensor multizone search for a moving target

This paper deals with a well-known problem in the general area of search theory: optimize the search resources sharing so as to maximize the probability of detection of a (moving) target. However, the problem we consider here considerably differs from the classical one. First, there is a bilevel search planning and we have to consider jointly discrete and continuous optimization problems. To this perspective original methods are proposed within a common framework. Furthermore, this framework is sufficiently general and versatile so as to be easily and successfully extended to the difficult problem of the multizone multisensor search planning for a Markovian target.     

RFID behavior study in enclosed marine container for real time temperature tracking

The performance of radio waves in open environments has been studied for years. In contrast, the behavior of Radio Frequency Identification (RFID) inside metal enclosed areas is not yet understood. This research project focuses on the 3-D mapping of RFID signal strength inside a 12 m refrigerated marine container instrumented with three different types of radio frequency (RF) emitters: 915 MHz reader; 2.45 GHz reader and 433 MHz RF transmitter. The main goal is to find a frequency/configuration that would allow real time reading of the temperature in a shipment of perishable products using RFID. Only one frequency and one antenna were used at a time. The RF transmitter antenna was mounted at two different places inside the container; at the top of the front wall (facing back) and on the ceiling in the middle of the container (facing down). The signal strength was acquired by a spectrum analyzer and its antenna was mounted on a small electric cart inside the container. The cart was programmed to move along the length of the container and stop repeatedly, allowing three automated measures per position. All data were analyzed in terms of power level and attenuation. The maps showed that the RFID antenna positioned at the front of the container delivered slightly better results than the one in the middle of the ceiling. The results showed a significantly higher performance at the 433 MHz level. This article was presented at Food Processing Automation Conference, American Society of Agricultural and Biological Engineering (ASABE), Providence, RI, June 28–29 2008.     

Software für den Mars

SciencenewsTu Wien

Software für den Mars