Microstructure and fatigue characteristics of direct chill cast and electromagnetic cast 2024 Al alloy ingots

The distinct advantages of the electromagnetic casting (EMC) process consist in the presence of stirring motions in the melt, which lead to significant grain size reduction in solidified ingot. Furthermore, surface and subsurface qualities are improved due to the absence of ingot mold. However, it is impossible to achieve the aforementioned advantages in conventional direct chill casting (DCC). In order to contrast the before and after heat treatments of the microstructural and mechanical characteristics of EMC and DCC 2024 aluminium alloys, optical microscopy, scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffractions (XRD), differential scanning calorimetry (DSC), etc. were carried out. Compared with the DCC ingot, the EMC ingot has better mechanical properties not only in the ascast condition but also in the as-aged condition. The DSC curves show that the EMC specimens have high enthalpy, i.e., the thermal kinetic energy to form precipitates during the aging treatment process. Despite heat treatments applied to the DCC ingot, it fails to attain the same mechanical properties as the EMC ingot. Moreover, considering the expernsive scalping operation for DCC ingots, the EMC technique, which offers a lower manufacturing cost, is one of the best manufacturing methods used in obtaining the ingots of wrought aluminum alloys.     

田5-斜19五段制剖面定向井钻井技术

五段制剖面定向井施工难度较大，主要介绍了田5—斜19井的井眼轨迹控制、相关安全钻井及钻井液技术，并对施工中发生的复杂情况进行了分析，总结了一些经验，对五段制剖面类型定向井施工具有一定的参考价值。     

Time-dependent deformation in an enhanced SiC/SiC composite

Time-dependent deformation in an enhanced SiC/SiC composite has been studied under constant load at high temperatures of 1200 °C, 1300 °C, and 1400 °C. Creep damage evolution was evaluated by a Young’s-modulus change of partial unloading and microscopic observation. The addition of the glassy phase in the matrix is very effective for protecting the composite from oxidation. The transient creep is dominant in creep life at all the temperatures. An empirical equation is proposed to describe creep behavior of the composite. It is found that creep activation energy increases with creep time at stresses lower than matrix cracking stress, but the activation energy remains constant at stresses higher than the matrix cracking stress. The creep strain rate of the composite is considered to be controlled by creep of fibers based on examining the time, strain, stress, and temperature dependencies of creep strain rates.     

负载Pd的分子筛催化剂上烷烃的异构化反应

采用吡啶吸附红外光谱和氨程序升温脱附法对负载Pd的几种分子筛催化剂(Pd/,βPd/ZSM-22,Pd/SAPO-11)的表面酸性进行了测定,并以正十二烷为模型化合物,在连续流动固定床微型反应器上考察了这几种分子筛催化剂的异构化反应性能。实验结果表明,Pd/β催化剂的酸量大且具有强酸中心;Pd/SAPO-11和Pd/ZSM-22催化剂的酸强度分布类似,但前者的酸量较小,后者的酸量适中。在正十二烷的转化率为65%左右时,对于单、双甲基C12异构体的选择性,Pd/ZSM-22催化剂与Pd/SAPO-11催化剂相近,高于Pd/β催化剂,而催化活性的高低顺序为:Pd/β>Pd/ZSM-22>Pd/SAPO-11,说明Pd/ZSM-22催化剂比较适合于大分子烷烃的异构化反应。在100mL中试装置上,以大庆减四线糠醛精制油为原料,对实验结果进行了验证。     

基于MATLAB/Simulink的交流伺服系统的仿真

交流伺服系统是一种复杂的非线性时变系统。文中介绍了应用MATLAB/SIMULINK可视化动态仿真平台进行软件伺服的系统仿真方法。该方法采用易扩展的模块化设计,可在线修改和观察所有参数以及参数变化对系统控制效果的影响,从而能方便地验证各种控制策略,并据此选出高效的快速设计方案,缩短了研制周期,对系统设计和调试起到了很大的作用。     

论给水变频控制系统在100MW机组中的应用

引用某热电厂100MW机组给水系统的变频改造实际运行和测试结果，证明在电厂给水系统中应用给水变频控制系统进行改造是切实可行的。不仅可以有效改善系统自动化水平和控制品质，而且可以取得良好的经济效益。     

PRO——一种新的地震资料处理方法

PRO(影像的参数展开)技术是由俄罗斯地球物理学家开发的一种崭新的地震资料处理技术。本文从PRO基本原理入手,简单介绍了PRO的速度分析原理。PRO速度分析和成像均以信号的椭圆展开和参数展开为基础,其中参数展开方法考虑波型转换、介质的横向不均匀造成传播速度的变化。该技术抛开了传统共中心点叠加的思想,从根本上解决了以CMP方法为基础的传统地震处理技术遇到的困难。通过模型与实例分析对比,PRO比传统CMP方法更优越。     

PERFORMANCE OF THREE STAGE TURBO－EQUALIZATION－DECODING

An increasing demand for high data rate transmission and protection over bandlimited channels with severe inter-symbol interference has resulted in a flurry of activity to improve channel equalization. In conjunction with equalization, channel coding-decoding can be employed to improve system performance. In this letter, the performance of the three stageturbo-equalization-decoding employing log maximum a posteriori probability is experimentally evaluated by a fading simulator. The BER is evaluated using various information sequence and interleaver sizes taking into account that the communication medium is a noisy inter symbol interference channel.     

铁通资源管理系统的设计和实现

在分析铁路通信资源结构的基础上,利用地理信息系统技术、数据库技术和客户/服务器(C/S)模式,为铁通(ChinaTietong)各级分公司和运营部门提供一套较为完善的资源管理信息系统。文中分析了铁通资源的结构与资源之间的关联,介绍了系统功能、物理结构及体系结构,详细分析了数据库设计、地理信息系统和系统安全性所采用的关键技术。这套系统的应用对铁通网络管理的现代化将起到重要的推动作用。     

Chemical compositions and optical properties of HfOxNy thin films at different substrate temperatures

High-k HfO_xN_y thin films have been grown by radio frequency (rf) reactive sputtering of metal Hf target in N₂/Ar/O₂ ambient at different substrate temperatures. The chemical compositions of the films have been investigated as a function of substrate temperature by X-ray photoelectron spectroscopy (XPS). XPS measurements showed that nitrogen concentration increases with an increase in substrate temperature. Room-temperature spectroscopic ellipsometry (SE) with photon energy 0.75–6.5 eV was used to investigate the optical properties of the films. SE results demonstrated that refractive index n increases with an increase in substrate temperature. Based on TL parameters which were obtained from the best fit results used in a simulation of the measured spectra, meanwhile, we conclude that the energy band gap (E_g) decreases with an increase in substrate temperature.