Robust estimation in flat fading channels under bounded channel uncertainties

We investigate channel equalization problem for time-varying flat fading channels under bounded channel uncertainties. We analyze three robust methods to estimate an unknown signal transmitted through a time-varying flat fading channel. These methods are based on minimizing certain mean-square error criteria that incorporate the channel uncertainties into their problem formulations instead of directly using the inaccurate channel information that is available. We present closed-form solutions to the channel equalization problems for each method and for both zero mean and nonzero mean signals. We illustrate the performances of the equalization methods through simulations.     

Sequential enzymatic quantification of two sugars in a single microchannel

This paper presents the implementation of a multiple analyte enzyme assay, based on the sequential injection of the different enzyme solutions, in an electrokinetic driven microfluidic chip. The assay methodology for the simultaneous quantification of d-glucose and d-fructose was reported in previous publications but here the real integration of both enzyme assays was achieved. When assays were executed separately, good reproducibility was observed with average CV values of 5.2% and 4.5% for the d-glucose and d-fructose assay, respectively. Next, the assays for the quantification of d-glucose and d-fructose were integrated simultaneously on chip, where each assay was executed consecutively in the same microreactor by applying a specific sequence of potentials at the reservoirs. This article proves the integration of a sequential based quantification approach in continuous microfluidic chips with electrokinetic actuation.     

Dynamic modeling and fuzzy logic control of vibrations of a railway vehicle for different track irregularities

Safe and comfortable transportation of passengers and goods on railways can be achieved by solving the vibration problem. In this study, the dynamic modeling of the full railway vehicle is used to perform vibration analysis in order to observe displacements and accelerations. The full railway vehicle model consists of 54 degrees of freedom which are defined by differential equations. Additionally, wheel–rail contact problem (i.e. creepage factors and hertzian spring stiffness of rails) is analyzed by finite element method. Dynamic modeling and vibration analysis are carried out using Matlab–Simulink software. Using the developed model, the car body vibrations, caused by a lateral and two vertical sinusoidal track irregularities, are controlled by fuzzy logic controllers placed between the car body and bogies. The fuzzy logic algorithm herein is used for realizing the active control of car body vibrations. The simulations of vibration analysis are obtained in time and frequency domains and compared with passive controlled status. The robustness of the designed controller is verified by simulations, carried out for the cases of car body mass variations. The results show the effectiveness of the proposed algorithm.     

Controlling droplet size variability of a digital lab-on-a-chip for improved bio-assay performance

Although several applications of electrowetting on dielectric digital lab-on-a-chips are reported in literature, there is still a lack of knowledge about the influence of operational and design parameters on the performance of an analytical assay. This paper investigates how droplet size variability, introduced by droplet dispensing and splitting, influences the assay performance with respect to repeatability and accuracy and presents a novel method to reduce this variability. Both a theoretical and experimental approach were followed. Monte Carlo simulations were applied to study the cumulative effect of the variability caused by different droplet manipulations on the final assay performance. It is shown that a highly controllable droplet generation and manipulation is achieved with respect to droplet size variability through an accurate control of actuation voltage, activation time, relaxation time, and electrode size. As a case study, it is illustrated that through optimization of these parameters a complete on-chip calibration curve is obtained for a d-glucose assay with an average CV-value of 2%. These new insights aim to bring the digital lab-on-a-chip technology closer to researchers in the field of diagnostics offering them a valuable and accessible alternative to standard analysis platforms.     

Erbium(III)‐doped polyurethaneureas: Novel broadband ultraviolet‐to‐visible converters

Novel, polymeric UV‐to‐visible converters were prepared by doping elastomeric poly(ether‐urethaneurea) copolymers with 5–25% by weight of ErCl₃ 6H₂O, corresponding to Er³⁺ concentrations of 2.19 to 10.86% by weight. When excited in the UV at 355 nm, the doped films generated a very broad, continuous visible luminescence between 400 and 750 nm. Preparation and spectroscopic characterization of the samples are discussed in detail. The color coordinates, color temperature, color rendering index of the samples, and the degree of overlap of their emission bands with the spectral response of the eye were determined. The color rendering index of samples is in the 57–70 range. The sample containing 2.19% by weight of Er³⁺ was found to give the color coordinates closest to the white‐source region and the highest color rendering index. The color temperatures of the samples were in the 5093–5540 K range. Overlap between the emission bands and the spectral response of the eye improved with increasing erbium concentration. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Antibacterial oil‐based polyurethane films for wound dressing applications

As an alternative to petroleum‐based polyol, hydroxyl containing material was prepared from linseed oil for polyurethane synthesis. Hexamethylene di‐isocyanate (HMDI) and/or 4, 4′‐methylene diphenyl di‐isocyanate (MDI) were used as isocyanate source. The polymerization reaction was carried out without catalyst. Polymer films were prepared by casting‐evaporation technique. The MDI/HMDI‐based polyurethane and its films had higher T_g and better thermal property than that of the HMDI‐based one because of the existence of benzene ring in the polymer chain. Static water contact angle was determined to be 74° and 77.5° for HMDI and MDI/HMDI‐based films, respectively. Water adsorption was found to be around 2.6–3.6% for both films. In vitro degradation of polyurethanes in phosphate buffered saline at 37°C was investigated by gravimetric method. Fourier transform infrared spectroscopy and scanning electron microscopy were used for confirmation of degradation on the polymer surface. The degradation rate of the HMDI‐based polyurethane film was found higher than that of the MDI/HMDI‐based film. Both the direct contact method and the MMT test were applied for determination of cytotoxicity of polymer films, and the polyurethane films investigated here was not cytotoxic. Silver‐containing films were prepared using Biocera A® as filler and were screened for their antibacterial performance against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and/or Bacillus subtilis. The films prepared with and without Biocera A® exhibited antibacterial activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of stress state on the stress-induced martensitic transformation in polycrystalline Ni-Ti alloy

The effect of stress state on the character and extent of the stress-induced martensitic transformation in polycrystalline Ni-Ti shape memory alloy has been investigated. Utilizing unique experimental equipment, uniaxial and triaxial stress states have been imposed on Ni-Ti specimens and the pseudoelastic transformation strains have been monitored. Comparisons between tests of differing stress states have been performed using effective stress and effective strain quantities; a strain offset method has been utilized to determine the effective stress required for transformation under a given stress state. Results of the tests under different stress states indicate that (1) despite the negative volumetric strain associated with the austenite-to-martensite transformation in Ni-Ti, effective stress for the onset of transformation decreases with increasing hydrostatic stress; (2) effective stressvs effective strain behavior differs greatly under different applied stress states; and (3) austenite in Ni-Ti is fully stable under large values of compressive hydrostatic stress.     

Increased resting and exercise-induced oxidative stress in young IDDM men

The effects of local application of the 5-HT3 receptor agonist, 1-(m-chlorophenyl)-biguanide (CPBG), and i.p. administration of ethanol on the extracellular levels of dopamine (DA) in the ventral tegmental area (VTA) were studied using in vivo microdialysis. Adult female Wistar rats were implanted with microdialysis probes in the VTA at least 24 h before each experiment. Stable extracellular levels of DA (101 +/- 9 fmol/20 min) were established before initiating the experiments. Application of 10-250 microM CPBG through the microdialysis probe dose-dependently enhanced the extracellular concentrations of DA but did not alter the levels of either 3,4-dihydroxyphenylacetic acid or homovanillic acid in the dialysate. The effects of CPBG were reversible and dependent upon Ca2+. Co-perfusion with the 5-HT3 receptor antagonist, 3-tropanyl-indole-3-carboxylate (ICS 205-930), inhibited the effects of CPBG on enhancing extracellular DA levels. The i.p. administration of 2 g/kg ethanol significantly (p < 0.005) enhanced the levels of DA to 150% of baseline values; this ethanol-induced increase was prevented by local perfusion with 100 microM ICS 205-930. These results suggest that 5-HT3 receptors in the VTA are involved in regulating the somatodendritic release of DA and in mediating the stimulatory effects of ethanol on this neuronal system.     

On the oscillatory instability of multiple-parameter systems

The postcritical oscillatory behaviour of an autonomous discrete system under the influence of two independent parameters is studied. Three distinct situations are identified and explored via the intrinsic harmonic balancing technique introduced earlier. In each case, the asymptotic equations of the behaviour surface in parameter-amplitude space are derived explicitly. It is observed that there exists an interesting analogy between this surface and the equilibrium surface associated with static instabilities. Indeed, the phenomenon analyzed here is akin to fold catastrophe. The family of limit cycles associated with the behaviour surface are also obtained in general terms. The results can be used very easily to analyze specific problems, and this has been demonstrated on an illustrative example.     

Process parameters for hydrocooling apricots, plums, and peaches

Freshly harvested apricots, plums, and peaches in crates containing 5–20kg were hydrocooled in flowing water at 1°C and 50mms^-1. The cooling parameters: lag factor, cooling coefficient, and time to half-cool, determined from the exponential decline in the dimensionless ratio of temperature differences between fruit centre and coolant temperature at time t and at zero time, varied somewhat with crate load. Increasing the load from 5 to 20kg increased the time to half-cool apricots by 17% and plums and peaches by 39%.