A design of a high-speed and high-efficiency capsule endoscopy system

This paper presents a high-speed and high-efficiency capsule endoscopy system. Both a transmitter and a receiver were optimized for its application through an analysis of the human body channel. ON-OFF keying modulation is utilized to achieve low power consumption of the in-body transmitter. A low drop output regulator is adopted to prevent performance degradation in the event of a voltage drop in the battery. The receiver adopts superheterodyne structure to obtain high sensitivity, considering the link budget from the previous analysis. The receiver and transmitter were fabricated using the CMOS 0.13-μm process. The output power of the transmitter is -1.6 dB·m and its efficiency is 27.7%. The minimum sensitivity of the receiver is -80 dB·m at a bit error ratio (BER) of 3 × 10 (-6). An outer wall loop antenna is adopted for the capsule system to ensure a small size. The integrated system is evaluated using a liquid human phantom and a living pig, resulting in clean captured images.     

Highly Stable Au Nanoparticles with Tunable Spacing and Their Potential Application in Surface Plasmon Resonance Biosensors

Colloidal Au‐amplified surface plasmon resonance (SPR), like traditional SPR, is typically used to detect binding events on a thin noble metal film. The two major concerns in developing colloidal Au‐amplified SPR lie in 1) the instability, manifested as a change in morphology following immersion in organic solvents and aqueous solutions, and 2) the uncontrollable interparticle distance, determining probe spacing and inducing steric hindrance between neighboring probe molecules. This may introduce uncertainties into such detecting techniques, degrade the sensitivity, and become the barricade hampering colloidal Au‐based transducers from applications in sensing. In this paper, colloidal Au‐amplified SPR transducers are produced by using ultrathin Au/Al₂O₃ nanocomposite films via a radio frequency magnetron co‐sputtering method. Deposited Au/Al₂O₃ nanocomposite films exhibit superior stability, and average interparticle distances between Au nanoparticles with similar average sizes can be tuned by changing surface coverage. These characteristics are ascribed to the spacer function and rim confinement of dielectric Al₂O₃ and highlight their advantages for application in optimal nanoparticle‐amplified SPR, especially when the probe size is smaller than the target molecule size. This importance is demonstrated here for the binding of protein (streptavidin) targets to the probe (biotin) surface. In this case, the dielectric matrix Al₂O₃ is a main contributor, behaving as a spacer, tuning the concentration of Au nanoparticles, and manipulating the average interparticle distance, and thus guaranteeing an appropriate number of biotin molecules and expected near‐field coupling to obtain optimal sensing performance.     

Printed Sub‐2 V Gel‐Electrolyte‐Gated Polymer Transistors and Circuits

The fabrication and characterization of printed ion‐gel‐gated poly(3‐hexylthiophene) (P3HT) transistors and integrated circuits is reported, with emphasis on demonstrating both function and performance at supply voltages below 2 V. The key to achieving fast sub‐2 V operation is an unusual gel electrolyte based on an ionic liquid and a gelating block copolymer. This gel electrolyte serves as the gate dielectric and has both a short polarization response time (<1 ms) and a large specific capacitance (>10 µF cm^?2), which leads simultaneously to high output conductance (>2 mS mm^?1), low threshold voltage (<1 V) and high inverter switching frequencies (1–10 kHz). Aerosol‐jet‐printed inverters, ring oscillators, NAND gates, and flip‐flop circuits are demonstrated. The five‐stage ring oscillator operates at frequencies up to 150 Hz, corresponding to a propagation delay of 0.7 ms per stage. These printed gel electrolyte gated circuits compare favorably with other reported printed circuits that often require much larger operating voltages. Materials factors influencing the performance of the devices are discussed.     

Direct Physical Imaging and Chemical Probing of LiFePO4 for Lithium‐Ion Batteries

The control of unexpectedly rapid Li intercalation reactions without structural instability in olivine‐type LiFePO₄ nanocrystals is one of the notable scientific advances and new findings attained in materials physics and chemistry during the past decade. A variety of scientific studies and technological investigations have been carried out with LiFePO₄ to elucidate the origins of many peculiar physical aspects as well as to develop more effective synthetic processing techniques for better electrochemical performances. Among the several features of LiFePO₄ that have attracted much interest, in this article we address four important issues—regarding doping of aliovalent cations, distribution of Fe‐rich secondary metallic phases, nanoparticle formation during crystallization, and antisite Li/Fe partitioning—by means of straightforward atomic‐scale imaging and chemical probing. The direct observations in the present study provide significant insight into alternative efficient approaches to obtain conductive LiFePO₄ nanocrystals with controlled defect structures.     

Proposal for an Inundation Hazard Index of Road Links for Safer Routing Services in Car Navigation Systems

Inundation of roads by heavy rainfall has attracted more attention than traffic accidents, traffic congestion, and construction because it simultaneously causes travel delays and threatens driver safety. For these reasons, in this paper, we propose an inundation hazard index (IHI) of road links, which shows the possibility of inundation of road links caused by rainfall. To generate the index, we have used two key data sources, namely the digital elevation model (DEM) and past rainfall records of when inundation has occurred. IHI is derived by statistically analyzing the relationships between the normalized relative height of the road links calculated from DEM within the watershed and past rainfall records. After analyzing the practical applicability of the proposed index with a commercial car navigation system through a set of tests, we confirmed that the proposed IHI could be implemented to choose safer routes, with reduced chances of encountering roads having inundation risks.s     

Feature‐Based Relation Classification Using Quantified Relatedness Information

Feature selection is very important for feature‐based relation classification tasks. While most of the existing works on feature selection rely on linguistic information acquired using parsers, this letter proposes new features, including probabilistic and semantic relatedness features, to manifest the relatedness between patterns and certain relation types in an explicit way. The impact of each feature set is evaluated using both a chisquare estimator and a performance evaluation. The experiments show that the impact of relatedness features is superior to existing well‐known linguistic features, and the contribution of relatedness features cannot be substituted using other normally used linguistic feature sets.     

Ultra‐small Form‐Factor Helix on Pad‐Type Stage‐Bypass WCDMA Tx Power Amplifier Using a Chip‐Stacking Technique and a Multilayer Substrate

A fully integrated small form‐factor HBT power amplifier (PA) was developed for UMTS Tx applications. For practical use, the PA was implemented with a well configured bottom dimension, and a CMOS control IC was added to enable/disable the HBT PA. By using helix‐on‐pad integrated passive device output matching, a chip‐stacking technique in the assembly of the CMOS IC, and embedding of the bulky inductive lines in a multilayer substrate, the module size was greatly reduced to 2 mm × 2.2 mm. A stage‐bypass technique was used to enhance the efficiency of the PA. The PA showed a low idle current of about 20 mA and a PAE of about15% at an output power of 16 dBm, while showing good linearity over the entire operating power range.     

Noun Sense Identification of Korean Nominal Compounds Based on Sentential Form Recovery

In a machine translation system, word sense disambiguation has an essential role in the proper translation of words when the target word can be translated differently depending on the context. Previous research on sense identification has mostly focused on adjacent words as context information. Therefore, in the case of nominal compounds, sense tagging of unit nouns mainly depended on other nouns surrounding the target word. In this paper, we present a practical method for the sense tagging of Korean unit nouns in a nominal compound. To overcome the weakness of traditional methods regarding the data sparseness problem, the proposed method adopts complement‐predicate relation knowledge that was constructed for machine translation systems. Our method is based on a sentential form recovery technique, which recognizes grammatical relationships between unit nouns. This technique makes use of the characteristics of Korean predicative nouns. To show that our method is effective on text in general domains, the experiments were performed on a test set randomly extracted from article titles in various newspaper sections.     

14 bit 50 ms/s 0.18 μm CMOS pipeline ADC based on digital error calibration

Described is a 14 bit 50 MS/s CMOS four-stage pipeline A/D converter (ADC)-based on a digital code-error calibration. The proposed calibration technique measures the capacitor mismatch errors of the front-end multiplying DAC (MDAC) with the back-end pipeline stages while the measured code errors are stored in memory and corrected in the digital domain during normal conversion. The calibration needs the increased power dissipation and chip area of 1.4 and 10.7 , respectively, compared to a 14 bit uncalibrated conventional pipeline ADC. The prototype ADC fabricated in a 0.18 um CMOS process occupies an active die area of 4.2 mm² and consumes 140 mW at 1.8 V and 50 MS/s. After calibration, the measured DNL and INL of the ADC are improved from 0.69 to 0.39 LSB and from 33.60 to 2.76 LSB, respectively.     

Controlling resonance frequencies in antennas to achieve wideband operation

A novel antenna design method for controlling resonance frequencies is presented. This method can be realised by simply inserting a spiral inductance and a gap capacitance into a conventional loop-type antenna, and this technique remarkably enhances an impedance bandwidth without increasing the antenna size. The proposed antenna has been designed to have 530 MHz (975?1505 MHz) and 150 MHz (2410?2560 MHz) dual bands (VSWR = 2.5), and can be effectively used as an internal antenna for global system for mobile communications (GSM) and Bluetooth bands. These wideband characteristics provide a critical advantage because the shift of an antenna operation frequency increases when it is near various other components.