Thermal runaway prevention in catalytic packed bed reactor by solid temperature measurement and Control

Magnetic crystallite thermometry has been used to measure the average nickel crystallite temperature in packed bed reactors during ethane hydrogenolysis, an exothermic reaction. The technique is based on the temperature dependence of the magnetic moment of dispersed nickel catalysts. Measurement of the average catalyst temperature is very useful for reactor control because of its shorter time constant compared with exit fluid temperature. Bed temperature control based on the exit fluid temperature, which has often been used as a control variable, is too slow to protect thermal runaway of the bed. The advantage of short time constant by measuring the average catalyst temperature has been incorporated with enhanced feedback control system to control the bed temperature and prevent the thermal runaway of the catalyst bed. An enhanced feedback control structure with supervisory action performed better than the classical proportional-integral control in runaway prevention when the two control schemes were compared with each other on the basis of the trippoint (incipient thermal runaway).     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.     

Localization of atrial natriuretic peptide receptors in the rat tongue and hard palate

The effect of a naturally occurring plant phenolic constituent (the acylphloroglucinol derivative, jensenone, derived from Eucalyptus jensenii) on the food intake of two folivorous marsupials, the common ringtail (Pseudocheirus peregrinus) and the common brushtail possum (Trichosurus vulpecula) was studied. When fed diets containing varying concentrations of jensenone, both species regulated their intake of jensenone so as not to exceed a ceiling intake. This ceiling was about twice as high for common ringtails as for common brushtails from northern Australia. Southern populations of common ringtails showed greatly reduced capacities to tolerate jensenone. When common brushtails were injected (0.5 mg.kg-0.75 body mass) with ondansetron (a selective antagonist of serotonin 5HT3 receptors), they ate significantly more jensenone than animals injected with physiological saline. The same pattern was observed when common ringtails were fed diets containing both jensenone and ondansetron (0.0035 mg.g-1 wet mass of diet). Ondansetron injection had no effect on food intake when the food did not contain jensenone while the addition of higher doses of ondansetron to diets of common ringtails very slightly reduced food intakes of a non-jensenone diet. When common brushtails were given 50 mg of jensenone by gastric lavage, their average subsequent intake of dietary jensenone matched the difference between the daily threshold and the dose given, although the response of individuals was highly variable. Lavage with water alone had no effect on subsequent jensenone intake compared with the pre-dose period. We interpret these results as evidence that the antifeedant effects of jensenone and related compounds are partly mediated by serotonin action on 5HT3 receptors most likely via "nausea" to condition a food aversion.     

Optical inhomogeneity and microstructure of ZrO(2) thin films prepared by ion-assisted deposition

The index inhomogeneity and the microstructure of ZrO(2) films prepared by Ar-ion-assisted deposition are investigated. The results show that as the Ar-ion momentum transferred to the growing film increases, the average refractive index increases, the vacuum-to-air spectral shift becomes almost zero, the sign of relative inhomogeneity transits from negative to positive, and the void fraction of the top layer next to air becomes smaller than that of the bottom one. These optical properties result from the improved packing density and denser outer region next to air. The Ar-ion bombardment also induces the changes in microstructure of ZrO(2) films, such as the preferential (111) orientation of cubic phase, increase in compressive stress, and reduction of surface roughness.     

Emergent self-organizing feature map for recognizing road sign images

Road sign recognition system remains a challenging part of designing an Intelligent Driving Support System. While there exist many approaches to classify road signs, none have adopted an unsupervised approach. This paper proposes a way of Self-Organizing feature mapping for recognizing a road sign. The emergent self-organizing map (ESOM) is employed for the feature mapping in this study. It has the capability of visualizing the distance structures as well as the density structure of high-dimensional data sets, in which the ESOM is suitable to detect non-trivial cluster structures. This paper discusses the usage of ESOM for road sign detection and classification. The benchmarking against some other commonly used classifiers was performed. The results demonstrate that the ESOM approach outperforms the others in conducting the same simulations of the road sign recognition. We further demonstrate that the result obtained with ESOM is significantly more superior than traditional SOM which does not take into the boundary effect like ESOM did.     

Development of a sequential robust–tolerance design model for a destructive quality characteristic

Robust design (RD) and tolerance design (TD) have received much attention from researchers and practitioners for more than two decades, and a number of methodologies for modeling and optimizing the RD and TD processes have been studied. However, there is ample room for improvement. Because most existing research considers RD and TD as separate research fields, the primary objective of this paper is to develop a sequential robust–tolerance design method to jointly determine the best factor settings and the closed-form solutions for the optimal specification limits. We then apply the proposed method to a destructive quality characteristic. Finally, a case study and sensitivity analyses are performed for verification purposes, and further studies are discussed.