A risk management approach to safety assessment of trenchless technologies for culvert rehabilitation

Proper functioning of culverts is not only critical to protecting the transportation system from flooding but also critical to maintaining the expected service life of the overall transportation system. During the service life of culverts, they deteriorate due to many reasons such as corrosion caused by road salt, blockage by debris and sediment, poor construction techniques, etc. Trenchless technologies have been used by several State Departments of Transportation (DOTs) to rehabilitate deteriorated drainage structures without disrupting the traffic and within a relatively short span of time. These technologies provide many benefits in terms of cost, time, quality, and expected service life. However, the safety aspects of these techniques have not been discussed and documented in detail probably due to the complexity and the lack of safety standards and specifications directly associated with the techniques. This paper discusses the application of a risk assessment framework to assess potential safety issues of currently available trenchless technologies for culvert rehabilitation. The findings of the study will provide additional information to improve the decision making process in selecting and planning culvert rehabilitation projects.     

Turbo multiuser detection for differentially modulated CDMA

In this letter, we study differentially modulated, iteratively decoded CDMA. The iterative multiuser receiver proposed consists of an additional soft-input soft-output (SISO) differential decoder, when compared to turbo multiuser detectors for absolutely modulated systems. Algorithms for iterative decoding with and without phase information at the receiver are developed. The resulting turbo receivers with differential modulation outperform coherent receivers with absolute modulation at moderate to high signal to noise ratios due to the interleaver gain associated with recursive inner encoders in serially concatenated encoding structures.     

Selective Photothermal Tumor Therapy Using Nanodiamond‐Based Nanoclusters with Folic Acid

This paper describes the fabrication and evaluation of folic acid (FA)‐conjugated nanodiamond (ND) nanoclusters for selective photothermal tumor therapy. ND nanoclusters with surface carboxyl groups are aminated using ethylenediamine and conjugated with FA via carbodiimide chemistry. The temperature of an aqueous ND dispersion (10 μg mL^?1) is increased to 54 °C upon laser exposure for 5 min. FA‐ND nanoclusters are preferentially taken up by KB cells (folate receptor positive) compared to WI‐38 (folate receptor negative) cells, suggesting specificity for tumor cells that overexpress folate receptors. Cell viability tests reveal that FA‐ND nanoclusters effectively and selectively ablate KB cells upon near‐infrared (NIR) laser exposure. In addition, fluorescence microscopy images confirm that only KB cells treated with FA‐ND nanoclusters are ablated in a spot (200 μm in diameter) by NIR laser exposure. In an animal model, a large amount of FA‐ND nanoclusters is accumulated into tumor tissue, resulting in dramatically reduced tumor volume post‐NIR laser exposure as compared to ND nanoclusters.     

Co-channel Interference Energy Harvesting for Decode-and-Forward Relaying

In this paper, co-channel interferences are exploited for energy harvesting in a Cooperative Network (CICN) in which a power constrained relay uses a power splitting architecture (CICN-PS) and a time switching architecture (CICN-TS) to harvest energy from the radio-frequency signals received from a source node and co-channel interferences. In the proposed CICN-PS and CICN-TS protocols, the relay applies decode-and-forward technology to decode the information of the source node, and then forwards the recoded information to a destination with the overall harvested energies. The system performance of the proposed protocols is discussed and evaluated using the exact throughput analyses and is then checked using Monte Carlo simulations over Rayleigh fading channels. The optimal power splitting ratio and energy harvesting time are derived by the Golden Section Search method, and throughput performance evaluations are performed. Our numerical and simulation results show distributions as follows. Firstly, the CICN-PS protocol outperforms the CICN-TS protocol. Secondly, the proposed protocols strictly depend on the location, amount and power of the co-channel interferences. Thirdly, when signal-to-noise ratio increases, the proposed CICN-PS protocol achieves the perfect throughputs where the cooperative relay applies the ideal receiver and co-channel interferences do not affect the destination. Finally, the numerical analyses agree well with the simulation results.     

Structural Explanation of the Dielectric Enhancement of Barium Titanate Nanoparticles Grown under Hydrothermal Conditions

When synthesized under certain conditions, barium titanate (BaTiO₃, BTO) nanoparticles are found to have the non-thermodynamic cubic structure at room temperature. These particles also have a several-fold enhanced dielectric constant, sometimes exceeding 6000, and are widely used in thin-layer capacitors. A hydrothermal approach is used to synthesize BTO nanocrystals, which are characterized by a range of methods, including X-ray Rietveld refinement and the Williamson–Hall approach, revealing the presence of significant inhomogeneous strain associated with the cubic phase. However, X-ray pair distribution function measurements clearly show the local structure is lower symmetry than cubic. This apparent inconsistency is resolved by examining 3D Bragg coherent diffraction images of selected nanocrystals, which show the existence of ≈50 nm-sized domains, which are interpreted as tetragonal twins, and yet cause the average crystalline structure to appear cubic. The ability of these twin boundaries to migrate under the influence of electric fields explains the dielectric anomaly for the nanocrystalline phase.     

Highly Crystalline Soluble Acene Crystal Arrays for Organic Transistors: Mechanism of Crystal Growth During Dip‐Coating

The preparation of uniform large‐area highly crystalline organic semiconductor thin films that show outstanding carrier mobilities remains a challenge in the field of organic electronics, including organic field‐effect transistors. Quantitative control over the drying speed during dip‐coating permits optimization of the organic semiconductor film formation, although the kinetics of crystallization at the air–solution–substrate contact line are still not well understood. Here, we report the facile one‐step growth of self‐aligning, highly crystalline soluble acene crystal arrays that exhibit excellent field‐effect mobilities (up to 1.5 cm V^?1 s^?1) via an optimized dip‐coating process. We discover that optimized acene crystals grew at a particular substrate lifting‐rate in the presence of low boiling point solvents, such as dichloromethane (b.p. of 40.0 °C) or chloroform (b.p. of 60.4 °C). Variable‐temperature dip‐coating experiments using various solvents and lift rates are performed to elucidate the crystallization behavior. This bottom‐up study of soluble acene crystal growth during dip‐coating provides conditions under which one may obtain uniform organic semiconductor crystal arrays with high crystallinity and mobilities over large substrate areas, regardless of the substrate geometry (wafer substrates or cylinder‐shaped substrates).     

Analysis of issues in gate recess etching in the InAlAs/InGaAs HEMT manufacturing process

We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13 μm–0.16 μm to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.     

Threshold‐Based Camera Motion Characterization of MPEG Video

We propose an efficient scheme for camera motion characterization in MPEG‐compressed video. The proposed scheme detects six types of basic camera motions through threshold‐based qualitative interpretation, in which fixed thresholds are applied to motion model parameters estimated from MPEG motion vectors (MVs). The efficiency and robustness of the scheme are validated by the experiment with real compressed video sequences.     

A Multi‐Functional Highly Efficient Upconversion Luminescent Film with an Array of Dielectric Microbeads Decorated with Metal Nanoparticles

Upconversion nanoparticles (UCNPs) have been integrated with photonic platforms to overcome the intrinsically low quantum efficiency limit of upconversion luminescence (UCL). However, platforms based on thin films lack transferability and flexibility, which hinders their broader and more practical application. A plasmonic structure is developed that works as a multi‐functional platform for flexible, transparent, and washable near‐infrared (NIR)‐to‐visible UCL films with ultra‐strong UCL intensity. The platform consists of dielectric microbeads decorated with plasmonic metal nanoparticles on an insulator/metal substrate. Distinct improvements in NIR confinement, visible light extraction, and boosted plasmonic effects for upconversion are observed. With weak NIR excitation, the UCL intensity is higher by three orders of magnitude relative to the reference platform. When the microbeads are organized in a square lattice array, the functionality of the platform can be expanded to wearable and washable UCL films. The platform can be transferred to transparent, flexible, and foldable films and still emit strong UCL with a wide viewing angle.     

基于盲源分离和时频分析的漏磁信号处理

利用独立分量分析的冗余取消特性,对多维加噪声观测信号进行盲源分离,得到源观测信号,实现噪声的有效消除,文章中应用此方法处理了仿真漏磁缺陷信号,实验结果表明:该除噪方法能极大提高漏磁信号的信噪比,且其效果要优于小波变换除噪方法.漏磁缺陷信号在时域上波形非常相似,很难加以分辨,而它们的危害性却大不相同,文章对裂纹和凹坑缺陷信号进行小波包分解,根据信号特征自适应的产生一组最优基来表征信号,分析这两种缺陷的时频特性,准确识别出这两种缺陷.