Operation of single transistor type ferroelectric random access memory

Verification was sought for the memory operation of a single transistor type ferroelectric random access memory (1T type FeRAM) with a circuit model for a memory cell transistor combined with a precharged capacitive decoupling sensing scheme. The wiring scheme of the 1T type FeRAM array was also proposed based on the operation of the fabricated memory cell transistor. As a result, the memory operation of 1T type FeRAM was confirmed at a low current level with high sensing speed and no reference cell, and the design and verification of the full chip were achieved.     

Data reuse algorithm for multiple reference frame motion estimation

A data reuse algorithm for multiple reference frame motion estimation is described. The proposed algorithm reduces memory access by modifying the reference frame search order and search centre such that the likelihood of data reuse is increased. Experimental results show that the algorithm reduces memory access by 15-30% compared to the conventional fast reference frame selection algorithm, while maintaining similar bit rate and PSNR     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

High‐Performance Transition Metal Dichalcogenide Photodetectors Enhanced by Self‐Assembled Monolayer Doping

Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based doping on the performance of WSe₂‐ and MoS₂‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 10¹¹ for octadecyltrichlorosilane (OTS) p‐doping and ≈10¹¹ for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm² V^?1 s in OTS/WSe₂ transistors and from 28.75 to 142.2 cm² V^?1 s in APTES/MoS₂ transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 10⁴ A W^?1) in the OTS/WSe₂ devices and by a factor of ≈26.4 (from 219 to 5.75 × 10³ A W^?1) in the APTES/MoS₂ devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe₂ devices and ≈24.5‐fold in the APTES/MoS₂ devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.     

Growth of tin whiskers for lead-free plated leadframe packages in high humid environments and during thermal cycling

Growth behavior of tin whiskers from pure tin and tin–bismuth plated leadframe (LF) packages for elevated temperature and high humidity storages and during thermal cycling was observed. In the storage at 60 °C/93% relative humidity (RH) and 85 °C/85%RH the galvanic corrosion occurred at the outer lead toes and shoulders where the base LF material is exposed, forming tin oxide layers of SnO₂. The corroded layers spread inside the film and formed whiskers around the corroded islands. Many whiskers were observed to grow from grain boundaries for the Fe–42Ni alloy (alloy42) LF packages. It was confirmed that the corrosion tends to occur on the side surfaces of outer leads adjacent to the mold flash. The contribution of ionic contaminants in epoxy mold compound (EMC) to the corrosion was not identified. During thermal cycling between −65 °C and +150 °C whiskers grew out of as-deposited grains for pure tin-plated alloy42 LF packages and they grew linearly with an increase of number of cycle. Growth mechanisms of the whiskers from grain boundaries and as-deposited grains were discussed from the deformation mechanism map for tin and mathematical calculation with a steady-state diffusion model.     

Short communication: lack of stage-specific embryonic antigen-1 expression by bovine embryos and primordial germ cells

The objective of this study was to determine whether stage-specific embryonic antigen-1, a cellular marker commonly used to identify murine undifferentiated embryonic cells, is also a useful marker for bovine pluripotent cells. Expression of stage-specific embryonic antigen-1 was examined by indirect immunohistochemistry on bovine preimplantation embryos and on primordial germ cells contained in the genital ridge. Expression of stage-specific embryonic antigen-1 was not observed in any of the cleavage-stage bovine embryos examined, including one-cell, two-cell, four-cell, eight-cell, morula, and blastocyst stages, nor in tissue sections of bovine genital ridges collected from embryos on d 34, 37, and 40 of gestation. As expected, expression of stage-specific embryonic antigen-1 was detected on murine preimplantation embryos and on murine teratocarcinoma cells. Results of this study indicate that, unlike in the mouse, stage-specific embryonic antigen-1 is not a useful cellular marker for pluripotent bovine embryonic cells or bovine primordial germ cells.     

A new spectrum extension method that maximizes the multistepminimum prediction error-generalization of the maximum entropy concept

Given (n+1) consecutive autocorrelations of a stationary discrete-time stochastic process, how this finite sequence is extended so that the power spectral density associated with the resulting infinite sequence of correlations is nonnegative everywhere is discussed. It is well known that when the Hermitian Toeplitz matrix generated from the given autocorrelations is positive definite, the problem has an infinite number of solutions and the particular solution that maximizes the entropy functional results in a stable all-pole model of order n. Since maximization of the entropy functional is equivalent to maximization of the minimum mean-square error associated with one-step predictors, the problem of obtaining admissible extensions that maximize the minimum mean-square error associated with k-step (k⩽n) predictors, that are compatible with the given autocorrelations, is studied. It is shown that the resulting spectrum corresponds to that of a stable autoregressive moving average (ARMA) (n, k-1) process     

Electrical and optical properties of deep-red top-surface-emittinglasers

By studying thermal behavior of all-MBE surface-emitting lasers, barrier heights and optimum cavity design parameters are obtained. The barrier heights for holes between hetero-interfaces of Al_0.3Ga_0.7As-Al_0.65Ga_0.35As and AlAs-Al_0.65Ga_0.35As (Δx=-0.35) are measured to be 77 meV at zero bias for the deep-red top-surface-emitting laser. The barrier height decreases linearly with forward bias voltage, explaining the nonlinearity in current-voltage characteristics of the top-surface-emitting laser. The contribution of electrons to electrical resistance is estimated to be negligibly small compared to that of holes for the structure consisting of Δ_x =0.35. Minimum threshold current and maximum differential quantum efficiency observed around 200 K indicate slight mismatch between gain maximum and Fabry-Perot resonance for the deep-red top-surface-emitting laser     

Image Independent Driving Power Reduction for High Frame Rate LCD Televisions

In this letter, the constant driving power reduction ratio has been achieved for column drivers regardless of the input image by incorporating a new static power reduction scheme into the previous dynamic power reduction method. The measured power reduction ratio is around 50% for a 120 Hz liquid crystal display panel in such cases of still input video and fallback.