Sensitometric characteristics of an all‐solid‐state photoelectrochromic pixel for an electrochromic light‐addressable display

Abstract— An all solid‐state photoelectrochromic element (PECE) was developed on the basis of electrochromic layers of WO₃ and polyaniline with a layer of polymer electrolyte placed on a base of polyamidosulfoacid, in which a thin‐film CdS_xSe_1?x photoresistor was used as an electronic key. The dependence of the sensitometric characteristics of the PECE on the applied voltage was studied.     

Wear Resistance of Carbide and Boride Coatings on U8A Steel

Wear resistance measurements have been made with U8A steel bearing protective coatings based on the carbides of titanium, vanadium, and chromium or iron borides, for various forms of wear. The carbide and boride coatings raise the wear resistance considerably (by factors of 6-30 in accordance with the type of wear). Measurements have been made on the microhardness, microbrittleness, and adhesion of the coating to the substrate, which are effective characteristics that quite fully reflect the effects of the microhardness and state of stress, structure, and defectiveness on the wear resistance.     

Radio sensing of a cometary nucleus: Possibilities for investigating the surface layer

The possibility for determining the structure of the surface layer of a cometary nucleus from the data of bistatic radar sensing is investigated. A rigorous solution formulated for this problem on the basis of vector equations of the electromagnetic field is presented.     

Carbon nanofibers as hydrogen adsorbing materials for power sources

Porous carbon nanofibers are synthesized by CVD method from acetylene with use of iron-containing catalysts. Activation of the nanofibers in melted potassium hydroxide results in increasing surface area from initial 300–400 m² g⁻¹ to 1700 m² g⁻¹. As follows from XRD data, activated nanofibers do not contain regular packages of graphene layers, but retain high electric conductivity. Deposition of copper improves electrochemical hydrogen storing characteristics of carbon nanofibers. Carbon nanomaterials obtained can be used as hydrogen storing materials in batteries instead of hydride forming metals.     

Xylene Isomerization in a ZSM-5/SS Membrane Reactor

A membrane reactor containing different types of ZSM-5/porous SS membranes was used to perform the xylene isomerization reaction. The parent Na-ZSM-5 layer was synthesized by secondary growth on top of porous stainless steel tubes. The xylene isomerization reaction was carried out at different temperatures in the membrane reactor and in a fixed-bed reactor of identical geometry for comparison. Two different kinds of membranes were prepared by ion exchange: a Pt/H-ZSM-5 catalytic membrane and two Ba-ZSM-5 composites with different Ba²⁺ concentration. The p-xylene production using 100% exchanged Ba-membrane was about 28% higher than the fixed-bed reactor at 370 °C, when m-xylene was fed.     

Colloidal Photonic Crystals Doped with Gold Nanoparticles: Spectroscopy and Optical Switching Properties

Polystyrene artificial opals with few gold nanoparticles (AuNp) embedded in the interstices (doping) are grown by using the meniscus technique starting from a mixed suspension of microspheres and AuNp. Samples having different sphere diameters and nanoparticle loads have been prepared. Their reflectance spectra clearly show a dramatic bathochromic shift of the photonic stop band (up to 1400 cm^–1) and a reduction of its full width half maximum, due to an increase of the effective refractive index of about 8 % with respect to bare opals, which is accounted for by analytical theoretical models. Reflectance spectra do not show any direct evidence of AuNp absorption even at the higher AuNp doping level. Nanosecond transient absorption measurements on these systems indicate that a variation of transmission (optical switching) of about 150 % is observed for AuNp doped opals upon photoexcitation with 9 ns laser pulses at 532 nm. No switching is instead observed for bare opals.     

Sensor Selection in Arbitrary Dimensions

We address the sensor selection problem which arises in tracking and localization applications. In sensor selection, the goal is to select a small number of sensors whose measurements provide a good estimate of a target's state (such as location). We focus on the bounded uncertainty sensing model where the target is a point in the d -dimensional Euclidean space. Each sensor measurement corresponds to a convex polyhedral subset of the space. The measurements are merged by intersecting corresponding sets. We show that, on the plane, four sensors are sufficient (and sometimes necessary) to obtain an estimate whose area is at most twice the area of the best possible estimate (obtained by intersecting all measurements). We also extend this result to arbitrary dimensions and show that a constant number of sensors suffice for a constant factor approximation in arbitrary dimensions. Both constants depend on the dimensionality of the space but are independent of the total number of sensors in the network.     

Learning user preferences of route choice behaviour for adaptive route guidance

As the use of navigation systems becomes more widespread, the demand for advanced functions of navigation systems also increases. In the light of user satisfaction, personalisation of route guidance by incorporating user preferences is one of the most desired features. A user model applied to personalised route guidance is presented. The user model adaptively updates route selection rules when it discovers the predicted choice differs from the actual choice of the driver. This study employs a decision tree learning algorithm, the C4.5 algorithm, which has advantages over other data mining methods in terms of its comprehensible model structure. Simulation experiments with a real-world network were conducted to analyse the applicability of the model to adaptive route guidance and the accuracy of its prediction     

Algorithms of Ant System and Simulated Annealing for the p-median Problem

Consideration was given to the p-median problem for minimum in the integer formulation which is known to be NP-hard. Variants of the algorithms of ant system and simulated annealing were proposed for it, and the results of computer experiments were analyzed.