种子法制备聚合物乳液技术的进展

从建筑乳液的生产现状、自生种子法与外加种子法的区别、种子乳液的特点及外加种子法生产的乳液特性等方面介绍了种子法制备乳液技术的进展。     

The effect of radical desorption on the particle size distribution in vinyl acetate emulsion polymerization

The effect of free radical desorption is studied by using a mathematical model of particle size distribution in continuous emulsion polymerization. By comparing the theoretical prediction with experimental data, the value of D_o for the vinyl acetate (VAc) system is best chosen as 0.19 × 10^?7 cm²/h. The effect of radical desorption as well as mean residence time on the absolute particle size distribution, total concentration of polymer particles, conversion, and average number of radicals per polymer particle are analyzed by the model proposed.     

Effect of particle size on the surface oxidation and flotation behavior of galena particles in lime system

ABSTRACT

In this research, the effect of particle size on the surface oxidation and flotation behavior of galena in the lime system was studied. Coarse (?0.074 + 0.038 mm), intermediate (?0.038 + 0.025 mm) and fine (?0.025 mm) galena particles were used in the experiment. The dissolution tests, flotation tests, and sorption tests were accomplished. Through further analysis by XPS, the effect of particle size and lime was observed. The decrease of mineral particle sizes increased the adsorption ratio of collector and the dissolution of galena, while the hydrophilic product OH^?/Ca(OH)⁺ produced by dissolution occupied the dominant position, which led to the minerals hydrophilic.     

The influence of resin characteristics on the high speed melt spinning of isotactic polypropylene. II. On-line studies of diameter,birefringence, and temperature profiles

An investigation was carried out of the high speed melt spinning of three polypropylene resins with melt flow indices of 12, 35, and 300. On-line measurements were made of diameter, birefringence, and temperature as a function of distance from the spinneret for a range of spinning conditions for each polymer. A plateau (decrease of cooling rate) in the temperature profile was associated with the occurrence of crystallization in the spinline. The position of this plateau correlated with a rapid rise in the birefringence profile and a rapid decrease in the rate of drawdown in the diameter profile. The temperature and birefringence profiles were used to determine the temperature and position on the spinline at which the onset of crystallization occurred. It was found that the position and temperature of crystallization onset varied considerably with changes in take-up velocity, extrusion temperature, and resin melt index (weight average molecular weight). The crystallization onset occurred nearer the spinneret and at higher temperatures with (1) an increase of take-up velocity, (2) a decrease of extrusion temperature, or (3) a decrease of resin melt flow index. An analysis was carried out to estimate the rate of stress development with distance along the spinline; the results were also used to estimate the stress at the onset of crystallization for each spinning condition. It was concluded that the observed behavior could be attributed to the role of spinline stress in producing molecular orientation and consequent increase of crystallization rate.     

半参数广义线性模型惩罚似然估计的几个性质

本文在给出了半参数广义线性模型惩罚似然估计及惩罚准似然估计的基础上,得到了下面几个性质:(Ⅰ)极小惩罚似然估计及惩罚准似然估计等价于惩罚加权最小二乘估计;(Ⅱ)估计的收敛性及加速收敛法;(Ⅲ)估计的一种 Bayes 解释。     

Formation Mechanisms of Platelet Sr3Ti2O7 Crystals Synthesized by the Molten Salt Synthesis Method

The molten salt synthesis (MSS) method is utilized to synthesize the anisotropic platelet Sr₃Ti₂O₇ (S3T2) single-crystal particles. The aim of this study is to identify the essence of platelet Sr₃Ti₂O₇ crystal growth and guide the synthesis of anisotropic platelet SrTiO₃ crystals as well as various technologically important materials. Based on the results of X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy, the formation mechanism of platelet Sr₃Ti₂O₇ crystals conforms to a nucleation–structure rearrangement–dissolution–diffusion in situ epitaxial growth mechanism model. First, SrCO₃ reacts with TiO₂ to form submicrometer SrTiO₃ nuclei. Then, most of the nuclei surrounded by salt ions aggregate and rearrange to form a large SrTiO₃ matrix. The structural rearrangement and the subsequent in situ epitaxial growth processes control the morphology, composition, and size of the final Sr₃Ti₂O₇ crystals. In the synthesis process, the conversion between SrTiO₃ and Sr₃Ti₂O₇ is as follows: and the crystallographic orientation relationship between Sr₃Ti₂O₇ and SrTiO₃ in the interface is (100)_S3T2//{100}_ST, (010)_S3T2//{010}_ST, and (001)_S3T2//{001}_ST.     

A high propylene productivity over B2O3/SiO2@honeycomb cordierite catalyst for oxidative dehydrogenation of propane

Boron-based metal-free catalysts for oxidative dehydrogenation of propane (ODHP) have drawn great attention in both academia and industry due to their impressive activity and olefin selectivity. Herein, the SiO₂ and B₂O₃ sequentially coated honeycomb cordierite catalyst is designed by a two-step wash-coat method with different B₂O₃ loadings (0.1%-10%) and calcination temperatures (600, 700, 800 ℃). SiO₂ obtained by TEOS hydrolysis acts as a media layer to bridge the cordierite substrate and boron oxide via abundant Si-OH groups. The welldeveloped straight channels of honeycomb cordierite make it possible to carry out the reactor under high gas hourly space velocity (GHSV) and the thin wash-coated B₂O₃ layer can effectively facilitate the pore diffusion on the catalyst. The prepared B₂O₃/SiO₂@HC monolithic catalyst exhibits good catalytic performance at low boron oxide loading and achieves excellent propylene selectivity (86.0%), olefin selectivity (97.6%, propylene and ethylene) and negligible CO₂ (0.1%) at 16.9% propane conversion under high GHSV of 345,600 ml·(g B₂O₃)^-1·h^-1, leading to a high propylene space time yield of 15.7 g C₃H₆·(g B₂O₃)^-1·h^-1 by suppressing the overoxidation. The obtained results strongly indicate that the boron-based monolithic catalyst can be properly fabricated to warrant the high activity and high throughput with its high gas/surface ratio and straight channels.     

温度对工业汽轮机运行的影响

由于温度的变化，而引起机组热应力的变化，这是工业汽轮机运行中最主要的变化，它对机组的安全和运行影响非常大。     

山梨醇类聚丙烯成核剂的开发与应用研究进展

综述了山梨醇类聚丙烯成核剂产品在国内外的开发进展，介绍了该类成核剂在聚丙烯中的应用和效果，及其作用机理。     

Charge reduction and regeneration in K+, Na+, Mg2+, Ni2+ and Co2+-exchanged Wyoming Bentonite

Controlled calcination of ion-exchanged Wyoming Bentonite in the presence and absence of ammonia leads to layer charge reductions. Detailed chemical analyses of both unexchangeable and exchangeable species lead to the conclusion that in no case is there migration of the original interlamellar cations into the octahedral region of the layers although, in terms of ionic radius alone, Mg²⁺, Ni²⁺ and, possibly Co²⁺, might be expected to do so. The production of unexchangeable Mg, Ni or Co, is identified as resulting from high temperature hydrolysis leading to hydroxide or oxide formation.