Azide Reactive Dyes

Reactive dyes containing a sulphonylazide group can undergo fixation on nylon substrates by two different mechanisms. Under aqueous dyeing conditions, at or below 120d? C, the free amino end-groups of the polymer attack the sulphonylazide group with displacement of azide ion, and results in attachment of the dye to the substrate by a sulphonamide linkage. In contrast, if the dyed substrate is subjected to dry heat fixation at 170d? C, the azide group decomposes to a sulphonylnitrene species which undergoes insertion into C-H bonds of the polymer. The dye is again attached by a sulphonamide bridge, but in this case the amount of dye that can be fixed is independent of the amino end-group content of the polymer.     

The Effect of Organic Diluent on the Extraction of Eu(III) by HEH[EHP]

ABSTRACT

Because there are fewer tools available to probe the interactions therein, the effect of the fundamental chemistry of the organic diluent on solvent extraction equilibria has been under-characterized relative to the aqueous. As a result, diluents for solvent extraction are often selected for an application not for their utility as a medium for reaction, but for other (often equally) important reasons (like low flammability). To begin to improve this imbalance in the science, twenty different diluents have been used in a study of the extraction of radiotracer ^152/154Eu³⁺ from dilute nitric acid solutions using the extractant 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]). To increase the utility of the study and to honor the memory of Professor Jan Rydberg, this investigation was conducted by a cadre of comparatively inexperienced separation scientists (who are as a result no longer inexperienced separation scientists) as a radioanalytical chemistry and solvent extraction educational exercise. Slope analysis was used to determine the apparent stoichiometry of the extracted metal complex. The results discussed in the following indicate that, while the pH dependence exhibits the expected three H⁺ exchanged per metal ion extracted, the extractant dependence suggests that the number of protonated extractant molecules in the extracted complex changes with the organic diluent. The experimentally observed “extractant dependency” ranges from 2.5 to 3.0 dimer equivalent molecules per extracted metal ion. Ironically, in the diluents exhibiting the highest apparent M:(HA)₃ stoichiometry, HEH[EHP] extracts Eu³⁺ less efficiently. Europium luminescence spectroscopy was used to probe for changes in the first coordination sphere of the complex in different diluents. A model and conceptual framework for understanding these observations is described.     

TEM Characterization of Single- and Multilayer Triol-Based Sol–Gel PZT (53/47) Thin Films

Integrated lead zirconate titanate thin films deposited on Pt/Ti/SiO₂/Si substrates using a novel triol-based route were characterized using X-ray diffraction and transmission electron microscopy. Crack-free single-layer PZT films of up to 200 nm thick were prepared by triol-based sol–gel processing onto Pt/Ti/SiO₂/Si substrates. Films ∼75 nm thick exhibited a microstructure free of pores and second phase. As film thickness increased, film texture changed from {100} to {111} perovskite. Essentially, single-phase multilayer films could be prepared by the deposition and pyrolysis of several 75 nm layers, followed by a single crystallization step. The influence of heat-treatment schedule on the microstructure and orientation of the multilayer films is discussed. Comparison has been made between multilayer films prepared using the triol-based sol and an inverted mixing order/acetic acid-based sol.     

Temperature and processing effects on lithium ion conductivity of solution-deposited lithium zirconium phosphate (LiZr2P3O12) thin films

Lithium zirconium phosphate (LiZr₂P₃O₁₂) thin films have been prepared on platinized silicon substrates via a chemical solution deposition approach with processing temperatures between 700°C and 775°C. Films that were subject to a single high-temperature anneal were found to crystallize at temperatures above 725°C. Crystallization was observed in films annealed after each deposited layer at 700°C and above. In both cases, grain size was found to increase with annealing temperature. Ion conductivity was found to increase with annealing temperature in singly annealed films. In per-layer annealed films ion conductivity was found to initially increase then decrease with increasing annealing temperature. A maximum ion conductivity of 1.6 × 10⁻⁶ S/cm was observed for the singly annealed 775°C condition, while a maximum ion conductivity of 5.8 × 10⁻⁷ S/cm was observed for the 725°C per-layer annealed condition. These results are consistent with an increasing influence of cross-plane, internal interface resistance and vapor phase carrier loss in the per-layer annealed samples. This work demonstrates that post-deposition processing methods can strongly affect the ion conducting properties of LiZr₂P₃O₁₂ thin films.     

Biobased flexible polyurethane foams manufactured from lactide-based polyester-ether polyols for automotive applications

In this study, biobased polyester-ether polyols derived from meso-lactide and dimer acids were evaluated for flexible polyurethane foams (PUF) applications. Initially, the catalyst concentration was optimized for the biobased PUF containing 30% of biobased polyol (70% petroleum-based polyol). Then, the same formulation was used for biobased PUF synthesis containing 10%–40% of biobased polyols. The performance of biobased PUF was compared with the performance of the control foam made with 100% petroleum-based polyol. The characteristic times (cream, top of the cup, string gel, rise, tack-free) of biobased PUF were determined. The biobased PUF were evaluated for the mechanical (tensile and compressive) and morphological properties. As the wet compression set is important for automotive applications, it was measured for all biobased PUF. The thermal degradation behavior of biobased PUF was also evaluated and compared with the control foam. The effect of different hydroxyl and acid values of polyols on the mechanical properties of biobased PUF is also discussed. The miscibility of all components of PUF formulations is crucial in order to produce a foam with uniform properties. Thus, the miscibility of biobased polyols with commercial petroleum-based polyol was studied.     

Psychometric Evaluation of the EMO and the SUS in the Context of a Large-Sample Unmoderated Usability Study

This article describes the psychometric properties of the Emotional Metric Outcomes (EMO) questionnaire and the System Usability Scale (SUS) using data collected as part of a large-sample unmoderated usability study (n = 471). The EMO is a concise multifactor standardized questionnaire that provides an assessment of transaction-driven personal and relationship emotional outcomes, both positive and negative. The SUS is a well-known standardized usability questionnaire designed to assess perceived usability. In previous research, psychometric evaluation using data from a series of online surveys showed that the EMO and its component scales had high reliability and concurrent validity with loyalty and overall experience metrics but did not find the expected four-factor structure. Previous structural analyses of the SUS have had mixed results. Analysis of the EMO data from the usability study revealed the expected four-factor structure. The factor structure of the SUS appeared to be driven by item tone. The estimated reliability of the SUS (.90) was consistent with previous estimates. The EMO and its subscales were also quite reliable, with the estimates of reliability for the various EMO scales ranging from .86 to .96. Regression analysis using SUS, EMO, and Effort as predictors revealed different key drivers for the outcome metrics of Satisfaction and Likelihood-to-Recommend. The key recommendations are to include the EMO as part of the battery of poststudy standardized questionnaires, along with the SUS (or similar questionnaire), but to be cautious in reporting SUS subscales such as Usable and Learnable.     

A versatile facility for laboratory studies of viscoelastic and poroelastic behaviour of rocks

Novel laboratory equipment has been modified to allow both torsional and flexural oscillation measurements at sub-microstrain amplitudes, thereby providing seismic-frequency constraints on both the shear and compressional wave properties of cylindrical rock specimens within the linear regime. The new flexural mode capability has been tested on experimental assemblies containing fused silica control specimens. Close consistency between the experimental data and the results of numerical modelling with both finite-difference and finite-element methods demonstrates the viability of the new technique. The capability to perform such measurements under conditions of independently controlled confining and pore-fluid pressure, with emerging strategies for distinguishing between local (squirt) and global (specimen-wide) fluid flow, will have particular application to the study of frequency-dependent seismic properties expected of cracked and fluid-saturated rocks of the Earth's upper crust.     

How to “alternatize” a clustering algorithm

Given a clustering algorithm, how can we adapt it to find multiple, nonredundant, high-quality clusterings? We focus on algorithms based on vector quantization and describe a framework for automatic ‘alternatization’ of such algorithms. Our framework works in both simultaneous and sequential learning formulations and can mine an arbitrary number of alternative clusterings. We demonstrate its applicability to various clustering algorithms—k-means, spectral clustering, constrained clustering, and co-clustering—and effectiveness in mining a variety of datasets.