Optimization of reinforcement layout of scissor‐type bridge using differential evolution algorithm

Scissors mechanisms are commonly used in safety engineering during the construction of temporary structures, owing to their inherent advantages of foldability, transformability, and reusability. We effectively utilized these scissors mechanism features to develop a lightweight, deployable emergency Mobile Bridge (MB) based on optimization, and control of the folding structure. Here, we discuss the problems of optimal reinforcement layout for the MB by formulating and solving three optimization problems, namely: (a) the load capacity maximization problem, (b) the weight minimization problem, and (c) coupling the load capacity maximization problem and the weight minimization problem. The potential benefits resulting from the application of reinforcement were evaluated using a combination of finite element analysis and an optimization algorithm based on the differential evolution method. The results demonstrate the significant positive influence of the additional reinforcing members. In particular, the limit load was increased by over 10 times, while the weight was decreased to approximately half. The proposed methodology enabled the development of a substantially improved version of the MB characterized by a higher load capacity and lower weight in comparison to the initial bridge design.     

Investigation of controllable self-organized honeycomb micro-structure

Patterned micro- and nanostructure are of great significance in industrial applications such as electronics, optics and sensors. Microporous honeycomb film of polyhpenylene oxide (PPO) was fabricated as the template via evaporation of solution in carbon bisulfide under humid ambience. The effect of fabrication conditions on patterned microstructure was investigated by self-organization experiments to build quantitative relationship between ambient conditions such as humidity, concentration and honeycomb microstructure (diameter and height), through which the honeycomb film formation can be controlled to self-organize desirable PPO patterned microstructure. Especially, the height of honeycomb was derived from the diameter of honeycomb, and its validity was clarified by morphological comparison between PPO template and PDMS molded structure. Moreover, soft mold experiments were conducted to demonstrate its high efficiency and excellence as an alternative to construct regular micro-pattern.     

Electrosynthesis and charge-transport properties of poly(3′,4′-ethylenedioxy-2,2′:5′,2′′-terthiophene)

Polythiophene containing 3,4-ethylenedioxythiophene (EDOT), poly(3′,4′-ethylenedioxy-2,2′:5′,2′′-terthiophene), was synthesized by electrochemical oxidation of the corresponding monomer, 3′,4′-ethylenedioxy-2,2′:5′,2′′-terthiophene, in acetonitrile. The resulting polymer was soluble in DMSO and THF, and was characterized by ¹H NMR and mass spectroscopies, and GPC. The electrical conductivity of the oxidized polymer film was found to be comparable to those for polythiophene and poly(methylthiophene) despite of its short π-conjugation length.     

Melatonin-Induced Postconditioning Suppresses NMDA Receptor through Opening of the Mitochondrial Permeability Transition Pore via Melatonin Receptor in Mouse Neurons

Mitochondrial membrane potential regulation through the mitochondrial permeability transition pore (mPTP) is reportedly involved in the ischemic postconditioning (PostC) phenomenon. Melatonin is an endogenous hormone that regulates circadian rhythms. Its neuroprotective effects via mitochondrial melatonin receptors (MTs) have recently attracted attention. However, details of the neuroprotective mechanisms associated with PostC have not been clarified. Using hippocampal CA1 pyramidal cells from C57BL mice, we studied the involvement of MTs and the mPTP in melatonin-induced PostC mechanisms similar to those of ischemic PostC. We measured changes in spontaneous excitatory postsynaptic currents (sEPSCs), intracellular calcium concentration, mitochondrial membrane potential, and N-methyl-D-aspartate receptor (NMDAR) currents after ischemic challenge, using the whole-cell patch-clamp technique. Melatonin significantly suppressed increases in sEPSCs and intracellular calcium concentrations. The NMDAR currents were significantly suppressed by melatonin and the MT agonist, ramelteon. However, this suppressive effect was abolished by the mPTP inhibitor, cyclosporine A, and the MT antagonist, luzindole. Furthermore, both melatonin and ramelteon potentiated depolarization of mitochondrial membrane potentials, and luzindole suppressed depolarization of mitochondrial membrane potentials. This study suggests that melatonin-induced PostC via MTs suppressed the NMDAR that was induced by partial depolarization of mitochondrial membrane potential by opening the mPTP, reducing excessive release of glutamate and inducing neuroprotection against ischemia-reperfusion injury.     

Synergistic Extraction of Am(III) and Eu(III) by Tris(2‐pyridylmethyl)Amine with Various Anions in 1,2‐Dichloroethane

The extraction equilibria of Am(III) and Eu(III) by using a tripodal ligand, tris(2‐pyridylmethyl)amine (tpa), with various lipophilic anions have been investigated. The extractability of both Am(III) and Eu(III) was increased by the combination of tpa and counteranions due to a synergistic effect. The separation factors between Am(III) and Eu(III) were also increased from 7.6 to 49 by the combination of counteranions and organic solvents. The extraction equilibria of Am(III) and Eu(III) with tpa in 1,2‐dichloroethane were determined by slope analysis. It was found that three anions and one molecule of the ligand coordinated to Am(III) and Eu(III) was extracted regardless of the anions.     

Lubrication Mechanism of Phosphonium Phosphate Ionic Liquid Additive in Alkylborane–Imidazole Complexes

The assessment of ionic liquids (ILs) as lubricants in several tribological systems has shown their ability to provide remarkable reduced friction and protection against wear, whether they are used as additives or in the neat form. However, their corrosion and limited solubility in non-polar hydrocarbon oils represent the bottleneck-limiting factors for the use of ILs as lubricants. Therefore, in order to tackle these problems, mixtures of alkylborane–imidazole complexes with one halogen-free IL as additive were used in this study. The knowledge of the additive–surface interactions and hence the understanding of tribological properties are an important issue for lubricant formulations and were also investigated in this work. Thus, combination effects between two ionic liquid additives, a halogenated and a halogen-free one, were evaluated by a ball-on-disc-type tribometer under boundary lubrication conditions. Effective friction reduction and anti-wear properties have been demonstrated in tribological investigations when adding between 0.7 and 3.4 wt% of the halogen-free IL into base fluid composed of alkylborane–imidazole complexes. X-ray photoelectron spectroscopy analyses of the steel specimens were conducted to study the correlation between tribological properties and chemical surface composition of the boundary films formed on the rubbing surface. This work suggests potential applications for using halogen-free ILs as additives for synthetic ionic liquid lubricants.     

Geometry Dependence of Magnetization Reversal in Nanocomposite Alloys

The geometrical optimization of aligned hard-soft permanent-magnet nanocomposites is investigated by model calculations. Considered criteria are the shapes of the soft and c-axis-aligned hard phases, the packing fraction of the soft phase, and magnetostatic interactions. Taking into account that the energy product is enhanced via the volume fraction of the soft phase, subject to maintaining coercivity, we find that the best structures are soft-magnetic cubes as well as long rods with a square cross section. Comparing embedded soft cubes with embedded soft spheres of the same size, our nucleation-field analysis shows that the volume fraction of the soft phase is enhanced by 91%, with a coercivity reduction of only 25%. Magnetostatic interactions often but not always deteriorate the permanent-magnet performance, as exemplified by the example of MnBi:FeCo bilayers and multilayers.