Upgrading coal-derived liquids to diesel fuel

Distilled fractions of a coal-derived liquid from the H-Coal process were upgraded to diesel fuel by catalytic hydrotreatment. The total hydrotreated products were distilled into naphtha (<180°C) and diesel fuel fractions (>180°C) and the diesel fractions were analysed for hydrocarbon-type composition, hydrogen content and some diesel fuel properties. GC—MS-analyses were carried out on the hydrocarbon-type fractions to identify individual chemical compounds. To investigate the effect of different distillation cut points on diesel fuel yield and properties, cut points for one hydrotreated product were varied. The diesel fuel cetane numbers were correlated with percentage hydrogen, total aromatics and saturates. Cetane numbers above 40 were obtained for diesel fuels containing (i) more than 75% saturates, (ii) less than 15% total aromatics and (iii) a hydrogen content above 12.8%. Compounds identified by GC—MS-analyses (in the diesel fractions) were typical aromatic and cycloparaffin compounds. Normal-and iso-paraffin compounds were not detected. By varying the distillation cut point from 135 to 180°C, the cetane number of the residual diesel fraction improved from 37 to 44. This increase is ascribed to the removal of aromatic compounds in the 135–180°C boiling point range.     

A case of cognac adulteration

Summary Linear discriminant analysis of GLC-aromagram data is used to separate several classes of wine distillates, namely cognac, armagnac and brandy. In this paper we demonstrate how this method was used to detect adulteration. The adulteration was confirmed by the presence of ethyl heptanoate and limonene, which are well-known flavour compounds. They were analysed by means of a Purge and Trap headspace technique. Mass spectrometry was used to identify these flavours.

---

Ein Beispiel für die Verfälschung von Cognac

Zusammenfassung Die Linear-Discriminanz-Analyse von GLC-Aromagramm-Daten wird zur Klassifizierung von Weindestillaten wie Cognac, Armagnac und Brandy verwendet. In dieser Arbeit werden mit dieser Methode Verfälschungen nachgewiesen, die durch die Gegenwart der Ethylester der Heptansäure und des Limonen belegt werden konnten. Diese Substanzen wurden mit der Purge- und Trap-Methode erfaßt und massenspektrometrisch identifiziert.

     

Dependence of the efficiency-bandwidth product on electrical volumeof small dielectric loaded antennas

The efficiency fractional efficiency bandwidth product (EB) that is expressed as a ratio of the radiation resistance to the absolute value of an input reactance of an antenna is used as a performance measure for small dielectric-loaded monopole antennas (DLMAs). The dependence of the efficiency bandwidth (EB) on the permittivity of the dielectric loading (i.e., the electrical volume) is experimentally investigated for the first time after we succeeded in measuring the small radiation resistance of the DLMAs precisely on the basis of the Wheeler cap method. As a result, it was found that the EBs of some DLMAs were enhanced over a bare monopole antenna and an EB characteristic curve has a maximum point. This result suggests the presence of the optimum electrical volume for the dielectric loading in order to obtain the best EB performance. A calculation by the finite-difference time-domain (FDTD) method was also conducted to confirm the presence of the maximum EB value under a certain condition. A general reason for the existence of the peak value is also explained using a mathematical deduction     

Model checker aided design of a controller for a wafer scanner

For a case-study of a wafer scanner from the semiconductor industry it is shown how model checking techniques can be used to compute (1) a simple yet optimal deadlock avoidance policy, and (2) an infinite schedule that optimizes throughput. in the absence of errors. Deadlock avoidance is studied based on a simple finite state model using Smv, and for throughput analysis a more detailed timed automaton model has been constructed and analyzed using the Uppaal tool. The Smv and Uppaal models are formally related through the notion of a stuttering bisimulation. The results were obtained within 2 weeks, which confirms once more that model checking techniques may help to improve the design process of realistic, industrial systems. Methodologically, the case study is interesting since two models were used to obtain results that could not have been obtained using only a single model. Supported by the European Community Project IST-2001-35304 (Ametist), http://ametist.cs.utwente.nl/.     

Multi-field packet classification using ternary CAM

A new method for multi-field packet classification using a ternary CAM (TCAM) is presented. It is based on a preprocessing step that encodes classification rule information in the form of prefixes within an intermediate search key. The scheme enables TCAMs to handle larger rule sets more efficiently     

Cell cultures and nephrolithiasis

Large bone flaps for free transfer can be successfully and safely harvested based on the deep branch of the superior gluteal artery. The anatomy is consistent, the vessels are large, and the complications of this technique are minimal.     

Cholesteryl ester transfer protein gene polymorphism is a determinant of HDL cholesterol and of the lipoprotein response to a lipid-lowering diet in type 1 diabetes

The TaqIB cholesteryl ester transfer protein (CETP) gene polymorphism (B1B2) is a determinant of HDL cholesterol in nondiabetic populations. Remarkably, this gene effect appears to be modified by environmental factors. We evaluated the effect of this polymorphism on HDL cholesterol levels and on the lipoprotein response to a linoleic acid-enriched, low-cholesterol diet in patients with type 1 diabetes. In 44 consecutive type 1 diabetic patients (35 men), CETP polymorphism, apolipoprotein (apo) E genotype, serum lipoproteins, serum CETP activity (measured with an exogenous substrate assay, n = 30), clinical variables, and a diet history were documented. The 1-year response to diet was assessed in 14 type 1 diabetic patients, including 6 B1B1 and 6 B1B2 individuals. HDL cholesterol was higher in 10 B2B2 than in 14 B1B1 homozygotes (1.63 +/- 0.38 vs. 1.24 +/- 0.23 mmol/l, P < 0.01). HDL cholesterol, adjusted for triglycerides and smoking, was 0.19 mmol/l higher for each B2 allele present. CETP activity levels were not significantly different between CETP genotypes. Multiple regression analysis showed that VLDL + LDL cholesterol was associated with dietary polyunsaturated:saturated fatty acids ratio (P < 0.02) and total fat intake (P < 0.05) in the B1B1 homozygotes only and tended to be related to the presence of the apo E4 allele (P < 0.10). In response to diet, VLDL + LDL cholesterol fell (P < 0.05) and HDL cholesterol remained unchanged in 6 B1B1 homozygotes. In contrast, VLDL + LDL cholesterol was unaltered and HDL cholesterol decreased (P < 0.05) in 6 B1B2 heterozygotes (P < 0.05 for difference in change in VLDL + LDL/HDL cholesterol ratio). This difference in response was unrelated to the apo E genotype. Thus, the TaqIB CETP gene polymorphism is a strong determinant of HDL cholesterol in type 1 diabetes. This gene effect is unlikely to be explained by a major influence on the serum level of CETP activity, as an indirect measure of CETP mass. Our preliminary data suggest that this polymorphism may be a marker of the lipoprotein response to dietary intervention.     

Copper bioavailability from breakfasts containing tea. Influence of the addition of milk

The influence of drinking tea on copper bioavailability is unclear, particularly when tea is consumed with food. A breakfast meal containing white bread, margarine, strawberry jam, cheese and tea, with or without milk, was digested in; vitro and the dialysis of copper investigated. Reference breakfasts were prepared with water and water with milk. Copper dialysability (percentage of copper dialysed) was markedly increased by tea. The influence of adding milk to tea was not significant. A second study was carried out in rats using the breakfasts containing tea and water. They were spiked with ⁶⁴Cu and given orally to the animals in a single dose. Whole-body ⁶⁴Cu retention was measured over a 4-day period after administration. In order to determine the true absorption of ⁶⁴Cu a control group of rats received the dose intraperitioneally. The results in vivo indicate a tendency to higher absorption and retention of ⁶⁴Cu with tea. Liver ⁶⁴Cu retention was significantly elevated by tea. Therefore, the presence of tea in a breakfast meal favours the formation of soluble low-molecular-weight ligands which can be absorbed and retained by rats. The concomitant increase in liver copper retetition may be associated with higher bioavailability and/or lower copper mobilisation.