Optimization of supercritical CO2 extraction of dried Helichrysum italicum flowers by response surface methodology: GC-MS profiles of the extracts and essential oil

Supercritical (SC) CO₂ extraction of dried Immortelle flowers was performed at different process parameters. The optimal extraction conditions related to the yield were determined by response surface methodology (yield 4.09% at 20 MPa and 52°C). The extracts were analyzed by GC-MS and tremetone derivatives dominated: bitalin A, 12-acetoxytremetone, gnaphaliol, 1-[2-(2-methyl-2,3-dihydroxypropyl)-2,3-dihydro-1-benzofuran-5-yl]ethanone, isobutyl bitalin A, and 1-[2-(acetylprop-1-en-2-yl)-3-hydroxy-2,3-dihydro-1-benzofuran-5-yl]ethanone. Striking differences were found among the essential oil and SC-CO₂ extracts composition. The major oil compounds were γ-curcumene, α-pinene, β-selinene, α-selinene, and limonene. Mono- and sesquiterpene were found among minor constituents of the extracts. Neryl acetate was present in the extracts and essential oil.     

Nafion‐115/aromatic poly(etherimide) with isopropylidene groups/imidazole membranes for polymer fuel cells

Proton exchange membrane fuel cells (PEMFCs) with Pt/C gas diffusion electrodes and graphite single‐serpentine monopolar plates were constructed based on an aromatic poly(etherimide) with isopropylidene groups (PI)/imidazole (Im) and a popular Nafion‐115 matrix. The electrochemical properties of PEMFCs were tested at 25 and 60°C. The maximum power density of 171 mW/cm² and the maximum current density of 484 mA/cm² were detected for Nafion‐115/PI membrane. For both constructed PEMFCs the efficiency at 0.6 V was found about 41%. Immersion of Nafion‐115 in PI or PI/Im increased the thermal stability and mechanical properties of membranes. Thermal, mechanical properties and morphology of membranes were characterized by TGA, and AFM techniques including force spectroscopy. Interactions between the components in composite membranes were established by FT‐IR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42436.     

Surfactant-Assisted Dispersion of MWCNTs in Epoxy Resin Used in CFRP Strengthening Systems

The epoxy resin used as the bonding agent in carbon fiber-reinforced polymer (CFRP) strengthening systems was modified by the infusion of multiwalled carbon nanotubes (MWCNTs). Two types of surfactants, Triton X-100 and C₁₂E₈, were used to disperse the nanotubes in the epoxy resin employing ultrasonic mixing. Dynamic mechanical analysis and tensile tests were conducted to study the effect of the surfactant-assisted dispersion of nanotubes on the thermal and mechanical properties of epoxy composites. The morphology of the epoxy composites was interpreted using scanning electron microscopy (SEM). Moreover, the effect of surfactant treatment on the structure of nanotubes was investigated by Fourier transform infrared (FT-IR). Based on the experimental results, the tensile strength and the storage modulus of the epoxy resin were increased by 32% and 26%, respectively, by the addition of MWCNTs. This was attributed to the homogeneous dispersion of nanotubes in the epoxy resin according to the SEM images. Another reason for the enhancement in the tensile properties was the reinforced nanotube/epoxy interaction as a result of the surfactant anchoring effect which was proved by FT-IR. A moderate improvement in the glass transition temperature (T _g) was recorded for the composite fabricated using Triton X-100, which was due to the restricted molecular motions in the epoxy matrix. To characterize the temperature-dependent tensile behavior of the modified epoxy composites, tensile tests were conducted at elevated temperatures. It was revealed that the MWCNT modification using surfactant substantially improves the tensile performance of the epoxy adhesive at temperatures above the T _g of the neat epoxy.     

Selective Synthesis of Glyceryl Tris[9,10-(threo)-dihydroxyoctadecanoate]

Elaborating novel triacylglyceride (TAG) based polyester hyperbranched unimolecular encapsulating agents represents an original and promising approach to the selective delivery of hydrophobic biologically active compounds. However, selective modification of double bonds in unsaturated TAG to obtain corresponding pure polyhydroxy derivatives with high yields is still a big challenge. Two novel approaches to synthesize the glyceryl tris[9,10-(threo)-dihydroxyoctadecanoate] were proposed and tested: (1) via the bromination and nucleophilic substitution of secondary halide functions by oxyacetyl groups followed by the hydrolysis of acetyls, and (2) direct transformation of the double bonds by the reaction with peroxoformic acid in an excess of formic acid, and the removal of formyl protective groups. Glycerol trioleate and natural olive oil were used as starting materials. The first synthetic route allowed for successful preparation of the corresponding polyhalide and polyoxyacetyl products; however, a more effective final deacetylation procedure is required. The second proposed approach showed a very good reproducibility in obtaining hydroxy-oxyformyl derivatives. The optimal conditions of the reaction involve the use of diethyl ether as a cosolvent and stirring at room temperature for 30 min. To remove the formyl groups, three original procedures using organic solvent medium at room temperature were proposed: in the presence of cesium carbonate in chloroform–methanol mixture, and two methods using hydrochloric acid in chloroform–methanol mixture or in acetone. All three methods were efficient to carry out the deformylation; nevertheless, TAG esters remained stable only with 15–17 % hydrochloric acid in acetone. Simple isolation procedures and high overall yields (95.6 and 94.9 % for both triolein and olive oil, respectively) allow considering the second approach as a promising method to obtain threo-polyhydroxy derivatives from unsaturated TAG.     

Pyridinedicarboxylic Acid Diamides as Selective Ligands for Extraction and Separation of Trivalent Lanthanides and Actinides: DFT Study

This article presents a general approach to solving the urgent practical problem of separation of 4f-(lanthanides, Ln³⁺) and 5f-elements (actinides, An³⁺) very similar in properties based on the DFT quantum-chemical supercomputer simulation of Ln³⁺ and An³⁺ complexes with polydentate nitrogen-containing heterocyclic ligands. The method allows to calculate the geometry parameters of ligands and complexes and the metal to ligand binding energies with accuracy, permitting a direct comparison of calculation results with the experimental data, and estimate selectivity factors for separation of Eu³⁺/Am³⁺ model pair cations (SF_Am/Eu) in extraction experiments on a semi-quantitative level.

The applicability of the method and the approach demonstrated by DFT-modeling (nonempirical PBE functional, extended relativistic full-electron basis set) of a large series of diamides of pyridine-2,6-dicarboxylic (dipicolinic) acid (L) with different substituents at the amide nitrogen atoms and in the pyridine cycle, as well as their complexes [LM]³⁺, (H₂O)_nM(NO₃)₃ (n = 3, 4), and LM(NO₃)₃ (M = Eu, Am).

Based on the theoretical analysis a new model is proposed that describes the mechanism of Ln³⁺ and An³⁺ extraction in two-phase system highly acidic water solution-organic solvent, according to which the formation of An³⁺ and Ln³⁺ complexes occurs at the water/organic interface as a substitution reaction of hydroxonium ion in a cavity of a protonated ligand for the metal cation.

Calculation results confirm the experimentally established higher extraction ability of dipicolinic acid diamides containing one aryl and one alkyl substituent at the amide nitrogen atoms compared to the N,N,N′,N′-tetraalkyl diamides (“effect of anomalous aryl strengthening”). Based on the simulation results the structure of the modified ligand L suggested that it should ensure maximum An³⁺/Ln³separation selectivity in the series of dipicolinic acid diamides.     

Enhancement of the Performance of Low-Efficiency HVAC Filters Due to Continuous Unipolar Ion Emission

Our novel concept utilizing continuous emission of unipolar ions, which has been recently proven to enhance the efficiency of facepiece respirators, was applied to conventional HVAC filters. Laboratory study demonstrated that the air ion emission in the vicinity of a low-efficiency HVAC filter significantly improves its performance. For example, the collection efficiency of two commercial HVAC filters challenged with 1μm PSL particles jumped from 5–15% (measured with no ion emission) to 40–90% (when the ion output rate was ～ 10¹² e^?/sec). The enhancement effect depends on the filter type and, generally, on the distance from the ion emitter to the filter surface. The results were explained as follows. The air ions with high mobility are deposited on the fibers forming a macroscopic electric field, which shield out some incoming unipolarly charged particles due to repelling forces. The field estimate has shown that this explanation is feasible. The enhancement effect seems to have a good potential to be employed in industrial and residential ventilation systems as it enhances the aerosol collection efficiency of a low-efficiency HVAC filter while not affecting its pressure drop.     

Nanoparticle Synthesis by Copper (II) Acetylacetonate Vapor Decomposition in the Presence of Oxygen

Crystalline nanometer-sized Cu 2 O and CuO particle formation was studied by vapor thermal decomposition of copper (II) acetylacetonate in a vertical laminar flow reactor at ambient pressure. Experiments were carried out at 3 furnace temperature profiles (maximum values of t furn = 432, 596, 705°C) and with 2 carrier gases (oxygen/nitrogen with mixture ratios of 0.5/99.5 and 10.0/90.0). The results of computational fluid dynamics simulations are presented. The introduction of oxygen into the system was found to increase the decomposition rate and removed impurities from particles. The size of produced primary particles varied from 10 to 200 nm. Particle crystallinity was found to depend on both the oxygen concentration and the furnace temperature. A model taking into account the detailed chemical reaction mechanisms during the particle formation is proposed. The model allows one to build a dynamic phase diagram of the condensed products formed during the decomposition and is in good agreement with the experimental results.     

Bioaerosol Contamination of Ambient Air as the Result of Opening Envelopes Containing Microbial Materials

Mailing envelopes containing pathogenic spores of bacillus anthraxes, which have recently been used by terrorists to infect humans, calls for a new investigation to identify a level of possible contamination of ambient air as a result of the opening of such envelopes. Here we show that opening an envelope and unfolding a letter aerosolize microbial particles located inside and create their cloud with the diameter equivalent to the length of the letter side along which it was folded. With no motion of an envelope recipient (first case study presented in this paper), the front of the cloud moves due to forced convection caused by the impulse at opening and reaches a human face (approximately 50 cm from the opening zone) in about 6 sec. The concentration of particles at that distance is about three times lower compared to the concentration in the source. Further spread of the cloud brings its front to the distances of 1 and 1.5 meters within 25 and 55 seconds with the corresponding concentrations of around 10% and 5% compared to the source respectively. The second case study presents the results for a more realistic scenario when an envelope recipient, after observing a dust cloud appearing as the result of the opening of the envelope, recoils in fright creating additional air flows significantly disturbing the aerosol propagation described in the former study. It was found theoretically and verified by experiments that the amount of particles captured by the letter recipient varies significantly depending on the geometrical characteristics of the human, distance to the opening zone, reaction time, and recoil velocity.