Characterisation of cut and chip behaviour for NR,SBR and BR compounds with an instrumented laboratory device

ABSTRACT

Understanding the cut and chip (CC) effect in rubber is important for successful product development for tires used in off-road or poor road conditions and for other demanding applications of rubber. This research describes a laboratory testing method for characterising the CC fracture behaviour of rubber using a device that controls and records multiple applied loads and displacements during cyclic impact to the surface of a solid rubber specimen to mimic and quantify the CC damage experienced by tire tread compounds. To study the capabilities of the instrument, three model compounds were studied that are based on carbon black reinforced compounds of common elastomers used in tire treads: natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). These polymers have well-established CC tendencies in field performance of tire treads, with NR exhibiting the best CC resistance followed by SBR and finally BR. The same trend was found with the rubber impact testing approach that allowed the CC behaviour to be quantified using a new physical parameter which is the CC propensity (P). The relative ranking for CC resistance for the three compounds followed the fatigue crack growth resistances of the materials but was exactly opposite to the ranking of DIN abrasion resistance. This provides evidence that CC damage from impact by mm-scale asperities and abrasion of rubber against μm-scale asperities exhibit distinct characteristics in rubber.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.     

Measurement of soybean fatty acids by near-infrared spectroscopy: Linear and nonlinear calibration methods

A key element of successful development of new soybean cultivars is availability of inexpensive and rapid methods for measurement of FA in seeds. Published research demonstrated applicability of NIR spectroscopy for FA profiling in oilseeds. The objectives of this study were to investigate the applicability of NIR spectroscopy for measurement of FA in whole soybeans and compare performance of calibration methods. Equations were developed using partial least squares (PLS), artificial neural networks (ANN), and support vector machines (SVM) regression methods. Validation results demonstrated that (i) equations for total saturates had the highest predictive ability (r ²=0.91–0.94) and were usable for quality assurance applications, (ii) palmitic acid models (r ²=0.80–0.84) were usable for certain research applications, and (iii) equations for stearic (r ²=0.49–0.68), oleic (r ²=0.76–0.81), linoleic (r ²=0.73–0.76), and linolenic (r ²=0.67–0.74) acids could be used for sample screening. The SVM models produced significantly more accurate predictions than those developed with PLS. ANN calibrations were not different from the other two methods. Reduction in the number of calibration samples reduced predictive ability of all equations. The rate of performance degradation of SVM models with sample reduction was the lowest.     

Voltammetric and galvanostatic studies of hydrous and anhydrous iridium oxide films

Electrolytically grown hydrous oxide films on iridium wire electrodes have been thermally treated from 473 to 773 K. Anhydrous oxide films formed by this treatment have been subjected to cathodic polarization at the potential of the hydrogen evolution reaction, square-wave pulsing of potential from –0.25 to +1.25 V with respoect to SCE and to anodic galvanostatic polarization in 0.5 mol dm^–3 H₂SO₄. Cathodic pretreatment caused an increase of the voltammetric charge in the oxide formation region while the square-wave pulsing formed a hydrous oxide film whose voltammetric charge was superimposed on the charge of the anhydrous oxide film. Both procedures restored the hydrophilic nature of the electrode/solution interface. Potential-time curves during anodic galvanostatic polarization served as a diagnostic criterion for the stability and the state of the oxide film.     

The participation of block copolymers in the increase in the number of tie molecules

Three-block copolymers polyamide-block-polyX-block-polyamide (where X is styrene, ethylene-co-1-butene, and others) are able to improve substantially the toughness of poly(ϵ-caprolactam). Outer blocks of these copolymers are able to take part in folding lamellae of semi-crystalline polyamide, inner blocks are not. They operate as a spacer, meaning that the end blocks of copolymers capable of folding become parts of different lamellae, or that the unfoldable part of a block copolymer is pushed out of a folding lamella with a certain probability of the remaining outer block taking part in folding another lamella. This increases the number of tie-molecules.     

The potentiometric behaviour of copolymers of methacrylic acid in water-ethanol solutions

Summary The synthesis is reported of copolymers of styrene with methacrylic acid and of methyl methacrylate with methacrylic acid by radical copolymerization, of copolymers of methyl methacrylate with methacrylic acid by partial alkaline hydrolysis of poly(methyl methacrylate), and of block copolymers of styrene with methacrylic acid. Modified titration curves of all these copolymers were recorded in water and water-ethanol solutions. In a solution containing 50 mass.% ethanol, only small differences could be observed between the potentiometric behaviour of the individual copolymers and polymethacrylic acid. Also, there were no essential differences in any of the solvents used between the potentiometric behaviour of block copolymers of styrene with methacrylic acid, on the one hand, and polymethacrylic acid, on the other. On the contrary, maxima and minima were always observed on the modified titration curves of statistical copolymers with a higher content of the hydrophobic comonomer in solutions with a high water content. Thus, using the modified titration curves, it is possible to decide whether a given copolymer is of the block or statistical type.     

Electrostatic capillary collector for in-situ spectroscopic analysis of aerosols

Identification of particulate matter is important in assessing an individual’s exposure to potentially harmful particles, such as aeroallergens, toxins, and emissions from combustion sources, which can contribute to cardio-pulmonary diseases. Efficient collection of aerosols is essential for aerosol exposure studies such as analysis of chemical and biological components. We present the design and evaluation of a capillary collector that collects PM_2.5 onto the outer surface of a capillary for in-situ spectroscopic analysis. The capillary collector uses a needle-to-ring corona generator to charge particles; the electric field between a cylinder and a wire inserted into the bore of a capillary is used to collect the charged particles. Corona and repelling voltages are optimized for maximum collection of ambient PM_2.5 particles and fluorescent polystyrene latex microspheres in the PM_2.5 size range, on the capillary. The capillary collection efficiency of ambient PM_2.5 at 3 slpm operating flow rate and optimal operating voltages is 63%. Fluorescence spectroscopy is used to quantify the collection of polystyrene latex microspheres. The fluorescence-based capillary collection efficiency is in close agreement with the capillary collection efficiency of ambient PM_2.5. The collection and analysis methodology can be used to develop a compact, low-cost sensor for in-situ spectroscopic analysis of aerosols to determine their chemical composition for source apportionment.

Copyright © 2019 American Association for Aerosol Research     

Crystallization behavior of polymer/montmorillonite nanocomposites. Part II. Intercalated poly(ε-caprolactone)/montmorillonite nanocomposites

The combination of surfactant modified montmorillonite (MMT) silicate layers, poly(ε-caprolactone) (PCL) and the adopted melt processing procedure results in intercalated nanocomposites in which the silicate layers act as nucleating agents for the crystallization of the PCL matrix and by which in turn the overall crystallization rate increases. At a sufficiently high MMT concentration and degree of supercooling the polymer-swollen silicate layer stacks disturb crystal growth, resulting in a decrease in the overall crystallization rate. Simultaneous, time resolved, synchrotron small and wide angle X-ray scattering experiments reveal that—when the retarding effect is absent at a sufficiently high temperature—the final semicrystalline structures of pure PCL and its nanocomposites are identical. The poorer nucleation in the case of pure PCL, however, results in a time wise smearing of primary and secondary crystallization whereas in the nanocomposites these events are well separated due to a nucleation induced, efficient and rapid primary crystallization. Secondary crystallization involves the insertion of new lamellar crystals in between the already existing ones.     

Microstructure and physical properties of transparent thoria-yttria ceramics

The investigation of microstructure, some electrical and optical parameters of transparent ThO₂-15 mol % yo_1.5 ceramics has shown: (a) a very low porosity, close to zero; (b) a higher electrical conductivity than is usual for ThO₂ ceramics of the same composition, with the activation energy 1.12 eV; (c) a relative permittivity _r 33 under the given conditions; (d) confirmation of a single-phase fluorite-type cubic structure by means of Raman and infrared spectra.     

Fusion of smartphone sensor data for classification of daily user activities

Multimedia Tools and Applications - New mobile applications need to estimate user activities by using sensor data provided by smart wearable devices and deliver context-aware solutions to users...