Mechanical alloying and thermoelectric properties of Zn4Sb3

Thermoelectric Zn₄Sb₃ bulk specimens were produced by mechanical alloying of elemental powders and consolidated by hot pressing. Single phase Zn₄Sb₃ was not obtained using a nominal stoichiometric composition, but near single phase Zn₄Sb₃ with remnant elemental Zn having a relatively high density was produced using a nominally 11.7 at.% Zn rich powders. Phase transformations during mechanical alloying were systematically investigated using XRD and SEM. Thermoelectric and transport properties were evaluated for the hot pressed specimens and compared with results of analogous studies.     

On the use of pulse NMR techniques for the study of cement hydration

The application of pulse NMR to the study of hydration of cement and its constituents is discussed. The quantity of adsorbed water in hydrated samples can be most easily determined by measuring the proton free induction decay signal, whereas the rates of hardening and hydration can be best followed by measuring the proton spin-lattice and spin-spin relaxation times. The use of multiple pulse high resolution NMR in solids techniques is helpful in separating the H₂O and OH-group signals whereas ²⁷Al quadrupole coupling and spin-lattice relaxation may as well contribute to our understanding of the structure and hydration of cement.     

Mass spectrometric determination of 234U/238U ratio with improved precision

A new mass spectrometric method is proposed for measurement of 234U/238U ratio with a single Daly electron multiplier detector using the general peak jump method. The method is based on precise measurement of the 235U/238U ratio and 234U/235U ratio, which are used to calculate the 234U/238U ratio using the equation 234U/238U = 235U/238U x 234U/235U. The results show a significant improvement, i.e., more than 35 times better precision in measuring the (234)U/(238)U ratio with this method (sigma = 2.9 x 10(-8)) as compared to direct measurement of 234U/238U (sigma = 1.1 x 10(-6)). The method widens the applicability of the single collector system, and it will potentially be helpful to improve the precision in the case of the static multicollector system also.     

The effect of nano-sized BNBT on microstructure and dielectric/piezoelectric properties

(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (abbreviated as BNBT6) ceramic of near MPB composition was synthesized by two different processes. The first one is the addition of pre-synthesized BaTiO₃ and pre-milled Bi₂O₃, Na₂CO₃, BaCO₃ powders and calcination powder milled with a high energy milling machine in order to obtain a nano-particle size. The second one is a conventional one to compare with the former process. The pre-milling and the pre-synthesis process of raw materials lowered the calcination temperature to the extent of 59 °C as compared with conventionally fabricated BNBT6. The particle size of the powder exposed to heavy high energy milling reduced to 50–70 nm, whereas that of the conventionally ball-milled powder without the pre-milling and the pre-synthesis process had a larger size of 280 nm. To investigate the effects of the modified process on the characteristic of BNBT6 ceramics, the dielectric and the piezoelectric properties of sintered specimens fabricated by the two different processes were evaluated. It was found that the properties of the nano-sized BNBT6 ceramic near the MPB composition were increased by the modified mixing and milling method, showing superior characteristics in terms of the piezoelectric/dielectric constant and sintering density compared with those of the conventional process. The modified mixing and milling method was considered to be a new and promising process for lead-free piezoelectric ceramics owing to their excellent piezoelectric/dielectric properties.     

Recent Advances in Poly (Amide-B-Ethylene) Based Membranes for Carbon Dioxide (CO2) Capture: A Review

Polyamide-b-ethylene (Pebax) is a promising material for membrane-based gas separation application with excellent CO₂ capturing potential. Pebax is a rubbery elastomer which offers good mechanical support with its hard crystalline phase and excellent gas transport through its amorphous polyether phase. This review article includes recent advances in Pebax based membrane synthesis, solvent selection for membrane synthesis, compatible fillers with Pebax matrix and the improved gas separation performance of the prepared membranes. The literature review shows that Pebax based membranes are a good candidate for separation of CO₂ from flue gases and can be used for commercial applications.     

Phase change materials,their synthesis and application in textiles—a review

Phase change materials (PCMs) are widely being used in thermal energy storage systems for solar engineering, building materials, heat pumps, spacecraft, and in textile field especially smart and technical textiles. There are large numbers of organic and inorganic PCMs that possess a wide range of melting and solidifying temperature which attracts researcher’s attention for their applications in different fields. This review paper summarizes the investigation and analysis of the available organic and inorganic PCMs, different encapsulating techniques, characterization techniques, incorporation into fiber and pad application on textiles with practical applications in the field of smart textiles.     

Characterisation of phenolic components present in raw and roasted wattle (Acacia victoriae Bentham) seeds

The effect of roasting on the phenolic components of Australian wattle (Acacia victoriae Bentham) seed was investigated. Wattle seeds were roasted at 200 °C for 5–30 min and ground to flour, which were then extracted with 70% acetone. The total phenolic and flavonoid contents of the extracts were determined, and the phenolic components were analysed by reverse phase-high performance liquid chromatography (RP-HPLC) coupled with an on-line post-column reaction system to determine the active antioxidant peaks. The major peaks were then purified by preparative HPLC and identified by gas chromatography–mass spectrometry (GC–MS) analysis. Roasting of wattle seeds resulted in significant increases in its soluble phenolic content. The concentration of total phenolics and flavonoids in the seeds roasted for 30 min was more than nine and four times higher, respectively, than that in the raw seeds. The major phenolic acids present in wattle seeds were found to be succinic and gallic acids, the concentration of which increased by up to 10-fold as a result of roasting.     

Squeezed MHD tangent hyperbolic fluid flow across a sensor surface

In the present numerical study, the combined effect of temperature-dependent thermal conductivity, linear thermal radiation, and magnetic effect on shear-thinning tangent hyperbolic fluid past a sensor surface has been studied. After converting the modelled partial differential equations into ordinary differential equations by using similarity transformation, the system of equations is tackled with the aid of the shooting method. The influence of important parameters on the fluid motion and energy distribution is displayed graphically and analyzed in detail. The presented simulations depict that a significant rise in fluid velocity is noticed for an enhancement in the magnetic parameter while an opposite trend is observed for the temperature distribution. Moreover, the skin friction coefficient decreases as the squeezed flow index is increased.     

Optimized structure and electrochemical properties of sulfonated carbon nanotubes/Co–Ni bimetallic layered hydroxide composites for high-performance supercapacitors

Technical development in electronic devices is frequently stifled by their insufficient capacity and cyclic stability of energy-storage devices. The nano-structured materials have sensational importance for providing novel and optimized combination to overcome exiting boundaries and provide efficient energy storage systems. Metal hydroxide materials with high capacity for pseudo-capacitance properties have grabbed special attention. Lately, the blend of nickel and cobalt hydroxides has been considered as a favorable class of metallic hydroxide materials owing to their comparatively high capacitance and exceptional redox reversibility. The sulfonated carbon nanotube fluid (SCNTF) was prepared by the ion exchange method to be utilized as the exceptional templates due to astonishing specific surface area, ensuring the maximum utilization of the active material. The CoNi-layered double hydroxides (LDHs)/SCNTF core-shell nanocomposite was prepared by the simple solvothermal method. Structural analysis showed that the composite material had the high conductance of carbon materials, the pseudo-capacitance characteristics of metal hydroxides, and porous structure, which facilitates the ion shuttle when the electrolyte reacts with the active material. Electrochemical analysis results showed that CoNi-LDHs/SCNTF had excellent rate performance, reversible charge-discharge properties and cycle stability. It exhibited an extreme specific capacity of 1190.5 F g^?1 at a current density of 1 A g^?1; whereas specific capacity remained 953.7 F g^?1 at the current density was 10 A g^?1. In addition, the capacity retention rate after 5000 charge-discharge cycles at a current density of 20 A g^?1 was 81.0%. The results indicated that the CoNi-LDHs/SCNTF core-shell nanocomposite material is cost efficient and an effective substitute in energy storage applications.