Polymerization of epoxide with aluminum complex/silanol catalyst. VII. Thermal and electrical properties of epoxy resin cured with the new catalyst

Curing catalyst for epoxy resins was newly found. The catalyst consists of aluminum complex and silanol. Lack of one component of the pair does not cure epoxy resins. The epoxy resins cured with the catalyst are characterized by excellent electrical properties, especially at high temperature, due to the absence of strong acid species in the cured epoxy resin matrix. Heat-resistant property of the resin was also excellent. These properties were compared with those of epoxy resin cured with commonly used BF₃ complex.     

Ionic conductivity and interfacial properties of polymer electrolytes based on PEO and boroxine ring polymer

Blended polymer electrolytes based on poly(ethylene oxide) (PEO) and boroxine ring polymer (BP) solvated with lithium triflate were formulated and evaluated. Compared to PEO–salt polymer electrolyte, ionic conductivities of blended polymer electrolytes were two orders of magnitude higher in a low‐temperature range; as well, lithium transference numbers were increased to ～ 0.4. These were due to the increased mobility and anion trapping of boroxine rings. BP also exhibited the stabilizing effect on lithium–polymer electrolyte interface, and a reduced interfacial resistance between lithium metal and the polymer electrolyte was found with increasing of BP content. Polymer electrolytes based on PEO and BP are suitable for use in lithium secondary battery. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 17–21, 2002; DOI 10.1002/app.10090     

Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.     

Studies on miscibility in homopolymer/ random copolymer blends by equation of state theory

The miscibility of poly(methyl methacrylate) (PMMA) and styrene-acrylonitrile random copolymers (SAN) blends was investigated on the basis of the Flory—Orwoll—Vrij equation of state theory. To obtain the equation of state parameters (P*, V*_sp, T*: characteristic parameters), the pressure—volume—temperature (PVT) behaviour was measured for PMMA and a series of SANs with various acrylonitrile contents. The exchange energy parameter X_ij was also calculated by fitting the theory to some phase diagrams of PMMA/SAN blends. The Flory—Huggins interaction parameter χ was separated into two contributions based on the equation of state theory for mixtures: the exchange energy term χ_inter and the free volume term χ_free. Both the temperature and copolymer composition dependences of χ_inter and χ_free were estimated by calculations using the equation of state parameters. There exists a region in which χ_inter is negative, leading to a miscibility window in PMMA/SAN blends. However, the immiscibility at high temperatures in the blends cannot be explained only by χ_inter; it is caused by the free volume contribution, χ_free. The miscibility window behaviour in PMMA/SAN blends may be explained within the framework of the equation of state theory.     

Antitumor activity of synthetic alkylphospholipids with or without PAF activity

1-O-Octadecyl-2-O-methyl-sn-glycero-3-phosphocholine (ET-18-OMe) has been reported to possess definite antitumor activity in vivo. Twenty-two alkyl lysophospholipid analogs were chemically synthesized, and their antitumor activity against mouse experimental tumors (Sarcoma 180, MM46, P388) was examined. Among them, 1-O-octadecyl-2-O-acetoacetyl-rac-glycerol-3-phosphocholine was found to show antitumor activity similar to ET-18-OMe with less acute toxicity. Intravenous injection of the ET-18-OMe withsn-3 configuration retarded the subcutaneous growth of Sarcoma 180 cells effectively, while the growth inhibition by thesn-1 isomer was much less effective. This stereospecificity was similar to that observed in their activities as platelet-activating factor (PAF) agonists. The acetoacetyl compound, another PAF agonist, showed similar stereospecific antitumor action in vivo. These findings suggest that some alkyl lysophospholipids may activate host cells to a cytostatic stage against tumor cells in vivo through binding to a PAF receptor. Our preliminary results indicated that the responsible cells under these conditions might be primarily immature macrophages present in the bone marrow. No appreciable or even adverse stereospecificity was observed in the different sets of experiments where the activity of ET-18-OMe against MM46 tumor cells in vivo or the direct cytotoxicity against human promyelocytic leukemia HL-60 cells in vitro was examined. Under, some conditions, the antitumor activity of ET-18-OMe in vivo may be revealed through direct cytotoxicity and/or modulation of the host defense system by “nonspecific” mechanisms. Some alkylphospholipids without PAF activity may also show antitumor activity through similar, “nonspecific” mechanisms.     

Influence of activated carbon pore structure on oxygen reduction at catalyst layers supported on rotating disk electrodes

Carbon materials are often used as catalyst supports, and for catalysts in electrodes of a polymer electrolyte fuel cell, carbon black has been used. Recently, it was found, however, that activated carbon could replace carbon black and besides, significantly improve the activity of the electrode catalyst layer for oxygen reduction. In the present study, to optimize the pore structure of activated carbon for further activity improvement, the influence of the pore structure on the activity was investigated using activated carbon of various specific surface areas and mean pore diameters. A catalyst layer was formed from activated carbon loaded with platinum and a polymer electrolyte. The activity of the layer was measured in an oxygen-saturated perchloric acid solution, supporting the layer on a rotating glassy carbon disk electrode. We found that increases in the specific surface area and mean pore diameter increased the activity and that the latter was more effective than the former mainly due to the enhanced mass-transfer in the pores; the catalyst layer formed from activated carbon with the largest mean pore diameter was the most active. Unless pores excessively develop and lose connections between particles, a large pore diameter is therefore desired for the fuel cell electrodes.     

Ultra-high pressure sterilization of powdery food stuff—a new application of a roller compactor

A new non-heating technique was developed for the sterilization of food stuff. Applying a roller compactor, ultra-high pressure sterilization has experimentally demonstrated its ability to sterilize dry powders, such as corn flour and Chinese herbs, with little quality deterioration. Also, the degree of food sterilization was found correlated well with the linear press forces between the rollers, roller gaps, and number of compaction passes. In comparison to the conventional high pressure sterilization technique, the new dry continuous processing method has the advantage of lower investment cost and is more versatile for sterilizing various food powders.     

Photocatalysts using hexa- and octa-titanates with different tunnel space for water decomposition

Photocatalytic activities for water decomposition were examined for photocatalysts using hexa- and octa-titanates and TiO2(B) with different tunnel space in the structure. Using RuO2 as promoter, M2Ti6O13 (M = Li, Na, K, Rb) showed the stoichiometric production of Hz and O₂ except for Li, whereas H₂Ti₈O₁₇ and TiO₂(B) had very low activity producing only hydrogen as a product. The effects of promoters on Na₂Ti₆O₁₃ showed that the activity increased in the order of RuO₂ > RuO₂ + IrO₂ > IrO₂ > RuO₂ + Pt > MnO₂. These effects along with other related ones are discussed: it emerges that the presence of the tunnels is important for the achievement of high photocatalytic activity.     

Performance of solvothermally prepared Ga2O3-Al2O3 catalysts for SCR of NO with methane

The solvothermal reaction of mixtures of aluminum isopropoxide (AIP) and gallium acetylacetonate (Ga(acac)₃) directly yielded the mixed oxides of γ-Ga₂O₃-Al₂O₃. In the solvothermal synthesis, the crystal structure of mixed oxides was controlled by the initial formation of γ-Ga₂O₃ nuclei. The mixed oxides prepared in diethylenetriamine have extremely high activities for selective catalytic reduction (SCR) of NO with methane as a reducing agent. With increasing crystallite size of the spinel structure, the catalytic activity increased. The ratio of the amount of methane consumed by combustion to total methane conversion was proportional to the density of acid sites on the surface of the mixed oxides. The mixed oxide catalysts prepared in diethylenetriamine had lower densities of acid sites and showed a higher methane-efficiency for CH₄-SCR than those prepared in other solvents. These catalysts maintained their high activity even when the reaction was carried out under the severe conditions (i.e., high space velocity and low NO concentration).     

Thermotropic polyarylates derived from substituted hydroquinones and p-terphenyl-4,4″-dicarboxylic acid

Polyarylates from substituted hydroquinones (HQs) and p-terphenyl-4,4″-dicarboxylic acid (TPDA) that were modified with 1,2-bis(phenoxy)ethane-4,4′-dicarboxylic acid (PEC), 1,2-bis(2-chlorophenoxy)ethane-4,4′-dicarboxylic acid (ClPEC), terephthalic acid (TA) and p-hydroxybenzoic acid (HBA) were prepared and their thermal and mechanical properties were investigated. These polyarylates exhibited liquid crystallinity at about the same temperatures as polyarylates derived from substituted HQs and 4,4′-diphenyldicarboxylic acid (BB). However, as-spun fibers and injection-molded specimens of these polyarylates exhibited lower moduli than those of substituted HQs and BB that were modified with PEC, Cl-PEC and TA.