Phase equilibria and thermodynamic properties of Sn-Ag based Pb-free solder alloys

We have recently developed a thermodynamic database for micro-soldering alloys, alloy database for micro-solders (ADAMIS). ADAMIS which consists of the elements Ag, Bi, Cu, In, Pb, Sb, Sn, and Zn has been constructed by the calculation of phase diagrams (CALPHAD) method. The thermodynamic parameters for describing the Gibbs energy of the liquid and solid phases have been evaluated by optimizing the experimental data on phase boundaries and thermo-chemical properties. In this paper, the phase equilibria and the related thermodynamic properties pertaining to the Sn-Ag-X (X=Bi, In, Cu, and Zn) alloys are examined using ADAMIS. Typical examples of the isothermal and vertical section phase diagrams, liquidus surface, etc. for these promising lead-free solders are presented. In addition, ADAMIS is also applied to calculate the nonequilibrium solidification process using the Scheil model.     

Simultaneous or delayed administration of hepatocyte growth factor equally represses the fibrotic changes in murine lung injury induced by bleomycin. A morphologic study

Hepatocyte growth factor (HGF) is a humoral mediator of epithelial-mesenchymal interactions, acting on a variety of epithelial cells as mitogen, motogen, and morphogen. Exogenous HGF acts as a hepatotrophic factor and a renotrophic factor during experimental injury. To investigate whether HGF has a pulmotrophic function, human recombinant HGF was administered to C57BL/6 mice with severe lung injury by bleomycin (BLM). Low dose simultaneous and continuous administration of HGF (50 micrograms/mouse/7 d) with BLM (100 mg/mouse/7 d) repressed fibrotic morphological changes at 2 and 4 wk. Ashcroft score showed a significant difference in lung fibrosis with and without HGF at 4 wk (3.7 +/- 0.4 versus 4.9 +/- 0.3, p < 0.05). Furthermore, either simultaneous or delayed administration of high dose HGF (280 micrograms/mouse/14 d) equally repressed fibrotic changes by BLM when examined at 4 wk (Ashcroft score: 2.6 +/- 0.4 and 2.4 +/- 0.2 versus 4.1 +/- 0.2, p < 0.01). Hydroxyproline content in the lungs was significantly lower in mice with either simultaneous or delayed administration of high dose HGF as compared to those administered BLM alone (121.8 +/- 8.1% and 113.2 +/- 6.2% versus 162.7 +/- 4.6%, p < 0.001). These findings indicate that exogenous HGF acts as a pulmotrophic factor in vivo and prevents the progression of BLM-induced lung injury when administered in either a simultaneous or delayed fashion. HGF may be a potent candidate to prevent or treat lung fibrosis.     

Long-term survival in a patient with congenital laryngeal atresia and multiple malformations

A 74-year-old female with the chief complaint of lower abdominal and anal pain had been suffering from total incontinence due to cerebral palsy since her childhood. A giant stone was palpable on vaginal examination. A radiograph showed a giant calcification in the pelvis. Magnetic resonance imaging (MRI) revealed a giant vesico-vaginal stone, which occupied most of the bladder and vagina. Cystolithotomy was performed. The removed stone weighed 435 g, and measured 9.0 x 6.5 x 5.5 cm, and was composed of magnesium ammonium phosphate. To our knowledge only eight cases of female giant vesical stone have been reported. We herein report a rare case of vesico-vaginal stone unrelated to gynecological procedures.     

Photolysis of poly(3-buten-2-one), poly(4,4-dimethyl-1-penten-3-one), and poly(3-methyl-3-buten-2-one) in the presence of oxygen

Photolysis of poly(3-buten-2-one) (PMVK), poly(4,4-dimethyl-1-penten-3-one) (PBVK), and poly(3-methyl-3-buten-2-one) (PMIK) were carried out in dioxane under oxygen or nitrogen bubbling. The main chain degradations of PBVK and PMIK were quenched and polymeric peroxides were produced. The heat treatment of the polymer irradiated in the presence of oxygen promoted the degradation. The photodegradation of PMVK was enhanced in the presence of oxygen.     

Marked particle size and support effect of Pd catalysts upon the direct decomposition of nitric oxide

The catalytic behavior of beryllia-supported Pd catalyst for the direct decomposition of NO was compared with that of silica supported one. The TOF of NO decomposition was one order of magnitude larger in the case of Pd/BeO. Over Pd/SiO₂, the TOF was increased with the increase of the Pd particle size. On the contrary, over Pd/BeO smaller Pd particles exhibited higher TOF for NO decomposition suggesting some strong electronic or structural interaction between Pd and beryllia. TPD spectra of NO(a) over reduced catalysts indicated that NO was adsorbed on Pd/SiO₂ more strongly than on Pd/BeO, and dissociation of NO(a) was easier on the former catalyst. FT-IR spectra of adsorbed NO at room temperature followed by the evacuation at elevated temperatures confirmed this. TPD spectra of O₂ desorbed from oxidized surface indicated that adsorption strength of O(a) is one of the most important factors to determine the catalytic activity of NO decomposition over supported Pd catalysts.     

GaAs varactor diode for u.h.f. t.v. tuners

The design and fabrication of a GaAs varactor diode for u.h.f. t.v. tuners were carried out using a GaAs double epitaxial layer. The capacitance ratio of diode. C3/C25, is 6.0 and the series resistance at 470 MHz is 0.24 ?. These characteristics are much better than those of an Si diode and well satisfy the requirements for t.v. tuners.     

Site-directed mutagenesis study of the antibody 2D7 which catalyzes a reaction for insertion of Cu2+ into mesoporphyrin

Monoclonal antibody 2D7 generated against a transition-state analog N-methyl mesoporphyrin catalyzes a reaction for insertion of a cupric ion into mesoporphyrin. To investigate amino acid residues responsible for the catalytic activity, site-directed mutagenesis of the amino acid residues in the third complementarity determining region of the heavy chain (CDRH3) was performed on the antigen-binding fragment (Fab) of the antibody. Recombinant Fab mutants, in which Arg95 is replaced with Ala (R95A), Asp96 with Asn (D96N) and Met97 with Gly (M97G), were examined in terms of the catalytic efficiency of the reaction (k/K(S)) and the dissociation constant for N-methyl mesoporphyrin binding (K(d)) and these values were compared with those of the wild type. The k/K(S) values of the R95A and D96N mutants were 0.96% and 1.0% of that of the wild type, respectively, whereas the M97G mutant had no detectable catalytic activity. The K(d) values of the R95A and D96N mutants were 165 and 69 times that of the wild type, respectively, while that of the M97G mutant was similar to that of the wild type. The relationship between the k/K(S) and 1/K(d) values in the wild type and the R95A and D96N mutants suggests that Arg95 and Asp96 are responsible for stabilizing the transition-state in the catalytic reaction. The results of the M97G mutant allow us to propose that Met97 plays an important role in the catalytic activity probably due to a subtle and specific conformation of the antibody.     

A study of multivariate (\bar{X},S)control chart based on Kullback–Leibler information

Recently, Chou et al. [11] have considered the multivariate control chart for monitoring the process mean vector and covariance matrix for the related quality characteristics simultaneously by using log-likelihood ratio statistics. They have computed the approximation formula described with Bernoulli polynomials of degrees r≥30 by using software MATHEMATICA 4.0 for obtaining the control limit with sufficient accuracy for the specified type I error probability in the chart. However, they cannot have obtained the approximation formula for the power evaluation. By the way, Kanagawa et al. [12] have proposed the $(\bar{x},s)$ control chart for monitoring the mean and variance simultaneously based on Kullback–Leibler information when quality characteristics obey a univariate normal distribution. In this article, by adopting the procedure by Kanagawa et al., we propose the other approximation formula for determining simply the control limit with sufficient accuracy for the specified type I error probability. Furthermore, the power evaluation for the chart is also considered in theory.