New insights into the mechanisms of carbon dioxide mineralization by portlandite

Portlandite (Ca(OH)₂; also known as calcium hydroxide or hydrated lime), an archetypal alkaline solid, interacts with carbon dioxide (CO₂) via a classic acid–base “carbonation” reaction to produce a salt (calcium carbonate: CaCO₃) that functions as a low-carbon cementation agent, and water. Herein, we revisit the effects of reaction temperature, relative humidity (RH), and CO₂ concentration on the carbonation of portlandite in the form of finely divided particulates and compacted monoliths. Special focus is paid to uncover the influences of the moisture state (i.e., the presence of adsorbed and/or liquid water), moisture content and the surface area-to-volume ratio (s_a/v, mm⁻¹) of reactants on the extent of carbonation. In general, increasing RH more significantly impacts the rate and thermodynamics of carbonation reactions, leading to high(er) conversion regardless of prior exposure history. This mitigated the effects (if any) of allegedly denser, less porous carbonate surface layers formed at lower RH. In monolithic compacts, microstructural (i.e., mass-transfer) constraints particularly hindered the progress of carbonation due to pore blocking by liquid water in compacts with limited surface area to volume ratios. These mechanistic insights into portlandite's carbonation inform processing routes for the production of cementation agents that seek to utilize CO₂ borne in dilute (≤30 mol%) post-combustion flue gas streams.     

Intercomparison exercise of high pressure gas flow test facilities within GERG

Ten of the main European gas Companies decided to carry out the second intercomparison exercise of high pressure test facilities within GERG (Groupe Européen de Recherches Gazières). The survey has compared the performances of 8 high pressure gas flow laboratories in the period autumn 1998–autumn 1999.

The aim was to check to what extent results obtained at the various laboratories are comparable and to reveal possible ways of improving the performances. Tests have been carried out using three transfer standard packages of three different diameters. The considered performance parameters have been: (1) agreement of results between laboratories, (2) short term stability and (3) day to day reproducibility of the reference flow.

The following main conclusions have been drawn:

• The majority of the laboratories involved in the intercomparison produced very accurate results. Despite the involvement of five independent traceability chains, 92.5% of the test results are within a band of ±0.25%.

• For most facilities the short term fluctuations are of the order of ±0.1%. Individual facilities may perform even better.

• This exercise allowed us to confirm the good results of the previous campaign and to identify some items to improve future intercomparisons.

A Multi-Model Nonstationary Rainfall-Runoff Modeling Framework: Analysis and Toolbox

Water Resources Management - We present a framework and toolbox for multi-model (one at a time) nonstationary modeling of rainfall-runoff (RR) transformation. The designed time-varying nature of...     

An analysis of characteristic discharges for the Adaim River (Iraq) in multiyear period

A major River Tigris tributary in Iraq, the Adaim River, has a Mediterranean river flow regime with a total basin area of 12,482 km². The river catchment responds almost immediately to rainfall with apparently minimum storage (i.e. flashy stream). The river daily hydrograph showed a daily peak flow of 1,476 m³/s with substantial seasonal and random variability; the flow duration curve followed the two‐parameter lognormal probability distribution. Gamma and the two‐parameter Weibull probability distributions fitted the monthly mean river discharge for the period 1937–2012 well. Normal and gamma probability distributions were found to appropriately describe the distribution of the annual mean river discharge for the same period. Gumbel extreme value, Log Pearson type III, and the two‐parameter lognormal distributions gave a reasonable fit to the annual maximum discharge record for the river. A regression formula was used to fit the annual minimum discharge record, which has a significant number of zero values. There was a positive and significant correlation (r = 0.77) between the annual mean discharge at the measuring site and seasonal rainfall measured at Karkuk meteorological station located in the north central part of the basin. The rainfall record at Karkuk showed a significant decline in seasonal rainfall after 1993.     

Extracting Optimal Policies of Hydropower Multi-Reservoir Systems Utilizing Enhanced Differential Evolution Algorithm

Deriving the optimal policies of hydropower multi-reservoir systems is a nonlinear and high-dimensional problem which makes it difficult to achieve the global or near global optimal solution. In order to optimally solve the problem effectively, development of optimization methods with the purpose of optimizing reservoir operation is indispensable as well as inevitable. This paper introduces an enhanced differential evolution (EDE) algorithm to enhance the exploration and exploitation abilities of the original differential evolution (DE) algorithm. The EDE algorithm is first applied to minimize two benchmark functions (Ackley and Shifted Schwefel). In addition, a real world two-reservoir hydropower optimization problem and a large scale benchmark problem, namely ten-reservoir problem, were considered to indicate the effectiveness of the EDE. The performance of the EDE was compared with the original DE to solve the three optimization problems. The results demonstrate that the EDE would have a powerful global ability and faster convergence than the original DE to solve the two benchmark functions. In the 10-reservoir optimization problem, the EDE proved to be much more functional to reach optimal or near optimal solution and to be effective in terms of convergence rate, standard deviation, the best, average and worst values of objective function than the original DE. Also, In the case of two-reservoir system, the best values of the objective function obtained 93.86 and 101.09 for EDE and DE respectively. Based on the results, it can be stated that the most important reason to improve the performance of the EDE algorithm is the promotion of local and global search abilities of the DE algorithm using the number of novel operators. Also, the results of these three problems corroborated the superior performance, the high efficiency and robustness of the EDE to optimize complex and large scale multi-reservoir operation problems.     

Design and implementation of an adaptive fuzzy sliding mode controller for drug delivery in treatment of vascular cancer tumours and its optimisation using genetic algorithm tool

In this paper, the side effects of drug therapy in the process of cancer treatment are reduced by designing two optimal non‐linear controllers. The related gains of the designed controllers are optimised using genetic algorithm and simultaneously are adapted by employing the Fuzzy scheduling method. The cancer dynamic model is extracted with five differential equations, including normal cells, endothelial cells, cancer cells, and the amount of two chemotherapy and anti‐angiogenic drugs left in the body as the engaged state variables, while double drug injection is considered as the corresponding controlling signals of the mentioned state space. This treatment aims to reduce the tumour cells by providing a timely schedule for drug dosage. In chemotherapy, not only the cancer cells are killed but also other healthy cells will be destroyed, so the rate of drug injection is highly significant. It is shown that the simultaneous application of chemotherapy and anti‐angiogenic therapy is more efficient than single chemotherapy. Two different non‐linear controllers are employed and their performances are compared. Simulation results and comparison studies show that not only adding the anti‐angiogenic reduce the side effects of chemotherapy but also the proposed robust controller of sliding mode provides a faster and stronger treatment in the presence of patient parametric uncertainties in an optimal way. As a result of the proposed closed‐loop drug treatment, the tumour cells rapidly decrease to zero, while the normal cells remain healthy simultaneously. Also, the injection rate of the chemotherapy drug is very low after a short time and converges to zero.     

A four-bias three-layer graphene-based THz absorber

Wave absorbers are considered to be fundamental building blocks for the manipulation of light. Almost all optical systems exploit absorbers to realize some functions. A highly tunable wide-band THz absorber is presented herein. Utilizing a dual-bias scheme with a single graphene layer leads to greater freedom to control the absorption response, while a conventional periodic array of graphene ribbons and a layer of graphene sheet are also exploited. Also, a circuit model representation for all the constituent parts of the proposed absorber is developed with an evolved design methodology. According to the simulation results, wide-band absorption from 3.5 to 6 THz is achieved.

     

A single-phase p-type ac–ac converter with reduced components count and high boost factor

This paper proposes a new single-phase direct step-up ac–ac converter by modifying the p-type impedance source. It provides a high boost factor as well as high efficiency, while only six parts are required to design it, involving just two bidirectional power switches. A safe commutation method has been applied to power switches to make the converter snubber-free and high efficient. Input and output harmonic filters are no longer required since input and output currents variate continuously with small ripple and low total harmonic distortion (THD). The proposed topology only modulates the output voltage amplitude, not the phase and frequency, so the output frequency is identical to the input frequency and constant. Thus, it can be utilized in step-up conversion applications, like inductive power transmission from low ac voltage sources. Input and output have the same ground, which is a good protective feature. In this paper, the operating principle of the converter is demonstrated. Experimental results have been represented to evaluate the performance of the converter. For this purpose, an experimental prototype has been fabricated. Results are investigated and compared with other previous step-up ac–ac converters. Results confirm the theory, operating principle, and performance of the converter.     

Cylindrical electron–hole bilayer TFET with a single surrounding gate and induced quantum confinement

Journal of Computational Electronics - In this paper, for the first time, an electron–hole bilayer TFET based on a cylindrical architecture with a single surrounding gate is proposed. The...