Microstructure and mechanical property of irradiated Zr−2.5Nb pressure tube in Wolsong unit-1

With the aim of assessing the degradation of Zr−2.5Nb pressure tubes operating in the Wolsong unit-1 nuclear power plant, characterization tests are being conducted on irradiated Zr−2.5Nb tubes removed after 10-year operation. The examined tube had been exposed to temperatures ranging from 264 to 306°C and a neutron fluence of 8.9×10²¹ n/cm² (E>1 MeV) at the maximum. Tensile tests were carried out at temperatures ranging from RT to 300°C. The density of a-type and c-type dislocations was examined on the irradiated Zr-2.5Nb tube using a transmission electron microscope. Neutron irradiation up to 8.9×10²¹ n/cm² (E>1 MeV) yielded an increase in a-type dislocation density of the Zr−2.5Nb pressure tube to 7.5×10¹⁴ m⁻², which was highest at the inlet of the tube exposed to the low temperature of 275°C. In contranst, the c-component dislocation density did not change with irradiation, keeping an initial dislocation density of 0.8×10¹⁴ m⁻² over the whole length of the tube. As expected, the neutron irradiation increased mechanical strength by about 17–26% in the transverse direction and by 34–39% in the longitudinal direction compared to that of the unirradiated tube at 300°C. The change in the mechanical properties with irradiation is discussed in association with the microstructural change as a function of temperature and neutron fluence.     

Low-energy ion beam treatment of α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>(0001) and improvement of photoluminescence of ZnO thin films

A low energy N₂ ^? ion beam impinged on a α-Al₂O₃(0001) single crystal surface in the range of fluence 5×10¹⁵/cm²?1×10¹⁸/cm² at room temperature. After ion bombardment, chemical bonding on the modified sapphire surface was investigated by x-ray photoelectron spectroscopy. Below a fluence of 1×10¹⁵/cm², only a non-bonded N1s peak at the binding energy 398.7 eV was found, but further irradiation up to 2×10¹⁷/cm² induced Al?O?N bonding at around 403 eV. The occurrence of Al?N bonding was identified at ion fluence higher than 5×10¹⁷/cm² at 396.6 eV. II–VI ZnO thin films were grown on an untreated/ion-beam-induced sapphire surface by pulsed laser deposition (PLD) for the investigation of the modified-substrate effect on photoluminescence. The ZnO films grown on modified sapphire containing Al?O?N bonding only, and both Al?O?N and Al?N bonding showed a significant reduction of the peak related to deep-level defects in photoluminescence. These results are explained in terms of the formation of Al?N?O and Al?O?N layers and relaxation of the interfacial strain between Al₂O₃ and ZnO.     

Optimization of casting conditions for heat and abrasion resistant large grey iron castings

Numerical simulation technology was applied for optimizing the casting design and conditions in large cast iron castings for marine engine. By the simulation of mold filling and solidification sequences the problems of the previous casting conditions were analyzed and marked improvements for large cylinder liner parts were derived from these results. Especially the amount and positions of chills were optimized to increase the mechanical properties and to minimize the shrinkage and microporosity in the castings. Ultrasonic testing, penetration testing and mechanical property testing were carried out for the parts with the modified casting conditions. It showed that no defects in the castings were found and the productivity could be distinctly increased. The mechanical properties satisfied also the specification demanded.     

Pre-annealing effect of electroless Ni−B deposit as a diffusion barrier for electroplated Cu electrodes

Ni−B film of 1 μm thickness was electrolessly deposited on an electroplated Cu bus electrode. The film, which encapsulates the Cu bus electrodes, prevents Cu oxidation and serves as a diffusion barrier against Cu contamination of the transparent dielectric layer in a plasma display during the firing process at 580 °C. The microstructure of theas-deposited barrier film was amorphous phase and crystallized to Ni and Ni₃B after annealing at 300 °C. The good barrier properties observed here can be explained by Ni₃B precipitates at the grain boundaries acting as a fast diffusion path via pre-annealing at 300 °C before the firing process at 580 °C.     

Biofilm Responses to Flow Regulation by Dams in Mediterranean Rivers

Dams regulate downstream hydrology and modify water quality, which in turn can impinge on the biota, especially in rivers naturally subject to large hydrological variability, such as those under Mediterranean climate. The effect of dams on biofilms was analysed in three tributaries (Cinca, Siurana and Montsant) of the Ebro River (NE Spain). We hypothesized that flow regulation would lead to lower spatial variability of biofilms on the streambed and to a decrease in their metabolic rate per unit biomass, especially during low flow periods. Biofilm characteristics were studied in five transects evenly spaced along river reaches upstream (control) and downstream (impact) of dams in each river, along with riverbed granulometry, hydraulics and water chemistry. Chlorophyll‐a, respiratory activity, photosynthetic capacity and efficiency, and extracellular enzymatic activities (β‐d ‐glucosidase, alkaline phosphatase and leucine‐amino‐peptidase) of epilithic biofilms were measured in different seasons. Spatial variability of chemical and biological variables was reduced downstream of the dams. Chlorophyll‐a concentration, photosynthetic efficiency and respiration capacity were higher in impact than in control reaches, but generally, low inorganic phosphorus concentrations resulted in comparable phosphatase activities downstream and upstream of dams. On the other hand, β‐d ‐glucosidase and leucine‐amino‐peptidase activities were higher at impact reaches. Biofilms were thicker and metabolically more active at the impact reaches, with higher ability to transform dissolved organic matter. Overall, results from this study provide evidence that dams can largely affect the structure and activity of river biofilms, with foreseeable important consequences for river ecosystem functioning. Copyright © 2014 John Wiley & Sons, Ltd.     

Single-view-based 3D facial reconstruction method robust against pose variations

The 3D Morphable Model (3DMM) and the Structure from Motion (SfM) methods are widely used for 3D facial reconstruction from 2D single-view or multiple-view images. However, model-based methods suffer from disadvantages such as high computational costs and vulnerability to local minima and head pose variations. The SfM-based methods require multiple facial images in various poses. To overcome these disadvantages, we propose a single-view-based 3D facial reconstruction method that is person-specific and robust to pose variations. Our proposed method combines the simplified 3DMM and the SfM methods. First, 2D initial frontal Facial Feature Points (FFPs) are estimated from a preliminary 3D facial image that is reconstructed by the simplified 3DMM. Second, a bilateral symmetric facial image and its corresponding FFPs are obtained from the original side-view image and corresponding FFPs by using the mirroring technique. Finally, a more accurate the 3D facial shape is reconstructed by the SfM using the frontal, original, and bilateral symmetric FFPs. We evaluated the proposed method using facial images in 35 different poses. The reconstructed facial images and the ground-truth 3D facial shapes obtained from the scanner were compared. The proposed method proved more robust to pose variations than 3DMM. The average 3D Root Mean Square Error (RMSE) between the reconstructed and ground-truth 3D faces was less than 2.6 mm when 2D FFPs were manually annotated, and less than 3.5 mm when automatically annotated.     

Object tracking based on an online learning network with total error rate minimization

This paper presents a visual object tracking system which is tolerant to external imaging factors such as illumination, scale, rotation, occlusion and background changes. Specifically, an integration of an online version of total-error-rate minimization based projection network with an observation model of particle filter is proposed to effectively distinguish between the target object and the background. A re-weighting technique is proposed to stabilize the sampling of particle filter for stochastic propagation. For self-adaptation, an automatic updating scheme and extraction of training samples are proposed to adjust to system changes online. Our qualitative and quantitative experiments on 16 public video sequences show convincing performances in terms of tracking accuracy and computational efficiency over competing state-of-the-art algorithms.     

Memory leak detection in Plumbr

Platforms with automatic memory management, such as the JVM, are usually considered free of memory leaks. However, memory leaks can happen in such environments, as the garbage collector cannot free objects, which are not used by the application anymore, but are still referenced. Such unused objects can eventually fill up the heap and crash the application. Although this problem has been studied extensively, nevertheless, there are still many rooms for improvement in this area. This paper describes the statistical approach for memory leak detection, as an alternative, along with a commercial tool, Plumbr, which is based on the method. The tool is later analyzed with three case studies of real applications and in the process also analyzes strengths and weaknesses of the statistical approach for memory leak detection. Copyright © 2014 John Wiley & Sons, Ltd.     

Texture Mapping Real‐World Objects with Hydrographics

In the digital world, assigning arbitrary colors to an object is a simple operation thanks to texture mapping. However, in the real world, the same basic function of applying colors onto an object is far from trivial. One can specify colors during the fabrication process using a color 3D printer, but this does not apply to already existing objects. Paint and decals can be used during post‐fabrication, but they are challenging to apply on complex shapes. In this paper, we develop a method to enable texture mapping of physical objects, that is, we allow one to map an arbitrary color image onto a three‐dimensional object. Our approach builds upon hydrographics, a technique to transfer pigments printed on a sheet of polymer onto curved surfaces. We first describe a setup that makes the traditional water transfer printing process more accurate and consistent across prints. We then simulate the transfer process using a specialized parameterization to estimate the mapping between the planar color map and the object surface. We demonstrate that our approach enables the application of detailed color maps onto complex shapes such as 3D models of faces and anatomical casts.