Modification to the renneting functionality of casein micelles caused by nonionic surfactants

Nonionic emulsifiers of small molecular weight such as polysorbates are widely used in dairy products. Nevertheless, the mechanism of interaction between these surfactants and milk proteins is not yet fully understood. This work investigated the effect of Tween 20 on casein micelles by studying the renneting behavior of skim milk in the presence of different amounts of surfactant. The presence of Tween accelerated both the first and second phase of renneting in skim milk. The gel obtained showed a higher elastic modulus than that of a skim milk gel, but also showed similar brittleness. By varying the size of the surfactant (Tween 20 or Tween 80) as well as the colloidal state of the proteins in solution, it was possible to demonstrate that the surfactant did not have a direct effect on the activity of the enzyme, but rather had a direct effect on the casein micelles. The effect of surfactant on the gelation point was reduced by increasing surfactant size. The presence of Tween caused an increase in the size of the micelles without affecting their stability. In addition, Tween did not alter the amount of caseins free in the serum phase. These findings can contribute to improving our ability to custom design final structures in rennet-induced gels, though further studies are needed to fully understand the mechanism at play when casein micelles are enzymatically cleaved in the presence of nonionic surfactants of small molecular weight.     

Synthesis and thermal,mechanical and gas permeation properties of aromatic polyimides containing different linkage groups

Two series of aromatic polyimides containing various linkage groups based on 2,7‐bis(4‐aminophenoxy)naphthalene or 3,3′‐dimethyl‐4,4′‐diaminodiphenylmethane and different aromatic dianhydrides, namely 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride), 4,4′‐(hexafluoroisopropylidene)bis(phthalic anhydride), 3,3′,4,4′ benzophenonetetracarboxylic dianhydride, 9,9‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]fluorene dianhydride and 4,4′‐(4,4′‐hexafluoroisopropylidenediphenoxy)bis(phthalic anhydride), were synthesized and compared with regard to their thermal, mechanical and gas permeation properties. All these polymers showed high thermal stability with initial decomposition temperature in the range 475–525 °C and glass transition temperature between 208 and 286 °C. Also, the polymer films presented good mechanical characteristics with tensile strength in the range 60–91 MPa and storage modulus in the range 1700–2375 MPa. The macromolecular chain packing induced by dianhydride and diamine segments was investigated by examining gas permeation through the polymer films. The relationships between chain mobility and interchain distance and the obtained values for gas permeability are discussed. © 2014 Society of Chemical Industry     

Acetylcholinesterase voltammetric biosensors based on carbon nanostructure-chitosan composite material for organophosphate pesticides

A sensitive biosensor for chloropyrifos (CPF), an organophosphorus pesticide, was developed by immobilizing acetylcholinesterase (AChE) through covalent bonding to an oxidized exfoliated graphite nanoplatelet (xGnPs)–chitosan cross-linked composite. Because of the increased surface area and the conductive properties of the nanomaterial, AChE developed a high affinity for acetylthiocholine (ATCI) and formed thiocholine with a fast response. The response of the sensor was a linear function of ATCI concentration in two segments, one from 0.005 to 0.039 mM and the second from 0.064 mM to 0.258 mM. The corresponding equation for the first range was i_p(A) = 2.26 × 10^? 5c + 4.39 × 10^? 7 (R² = 0.992) and the equation for the second was i_p(A) = 6.80 × 10^? 6c + 1.30 × 10^? 6 (R² = 1.000), with a detection limit of 1.58 × 10^? 10 M. The fabrication of the sensor was simple, the response was fast and the stability acceptable. This sensor has many potential applications, the foremost being in organophosphorus pesticides.     

Compact Modules for Wireless Communication Systems in the E-Band (71–76 GHz)

The millimeter-wave spectrum above 70 GHz provides a cost-effective solution to increase the wireless communications data rates by increasing the carrier wave frequencies. We report on the development of two key components of a wireless transmission system, a high-speed photodiode (HS-PD) and a Schottky Barrier Diode (SBD). Both components operate uncooled, a key issue in the development of compact modules. On the transmitter side, an improved design of the HS-PD allows it to deliver an output RF power exceeding 0 dBm (1 mW). On the receiver side, we present the design process and achieved results on the development of a compact direct envelope detection receiver based on a quasi-optical SDB module. Different resonant (meander dipole) and broadband (Log-Spiral and Log-Periodic) planar antenna solutions are designed, matching the antenna and Schottky diode impedances at high frequency. Impedance matching at baseband is also provided by means of an impedance transition to a 50 Ohm output. From this comparison, we demonstrate the excellent performance of the broadband antennas over the entire E-band by setting up a short-range wireless link transmitting a 1 Gbps data signal.     

New Linkage with Linear Actuator for Tracking PV Systems with Large Angular Stroke

This paper focuses on the development of an optimized photovoltaic tracking system involving low-cost, relative simple mechanisms, with linear actuators able to insure strokes comparable with those resulted when using gear rotary actuators. Starting with a rhombus linkage, with a linear actuator on the diagonal used for the elevation motion till 90°, a new performance solution is generated. This new linkage allows large angular strokes by using an asymmetric rhombus and an eccentrically positioned linear ac...     

Extended studies of degradation mechanisms in the refractory lining of a rotary kiln for iron ore pellet production

Changes, over a period of 8 years, in the chemical composition and morphology of deposit and lining materials in a production rotary kiln for iron ore pellet manufacture are described. The following have been studied: two types of refractory brick used as lining material; deposited chunk materials from the lining; the interaction zones between deposits and linings. Morphological changes at the deposit/lining interface, and the active chemical reactions, are established. Larger hematite grains in the deposit material (5–50 μm) primarily remain at the original deposit/lining interface. The remainder penetrates fissures, voids and brick joints, forms a laminar structure with corundum from the bricks, and migrates in grains in the lining material. Potassium penetrates more deeply into the bricks than hematite, resulting in the formation of kalsilite, leucite and potassium β-alumina, which contribute to degradation of the lining.     

Complexity-preserving simulations among three variants of accepting networks of evolutionary processors

In this paper we consider three variants of accepting networks of evolutionary processors. It is known that two of them are equivalent to Turing machines. We propose here a direct simulation of one device by the other. Each computational step in one model is simulated in a constant number of computational steps in the other one while a translation via Turing machines squares the time complexity. We also discuss the possibility of constructing simulations that preserve not only complexity, but also the shape of the simulated network.     

Generalized modus Ponens using various implications and T-norm product with threshold

Using Generalized Modus Ponens reasoning, we examine the values of the inferred conclusion depending on the correspondence between the premise of the rule and the observed fact. The conclusion is obtained using a set of implications in order to represent a fuzzy if-then rule with a single input single output and the t-norm with threshold generated by t-norm T(x,y)?=?xy, as a compositional operator. Some comments and an example are presented in order to show how the obtained results can be used.     

Evolutionary events in a mathematical sciences research collaboration network

This study examines long-term trends and shifting behavior in the collaboration network of mathematics literature, using a subset of data from Mathematical Reviews spanning 1985–2009. Rather than modeling the network cumulatively, this study traces the evolution of the “here and now” using fixed-duration sliding windows. The analysis uses a suite of common network diagnostics, including the distributions of degrees, distances, and clustering, to track network structure. Several random models that call these diagnostics as parameters help tease them apart as factors from the values of others. Some behaviors are consistent over the entire interval, but most diagnostics indicate that the network’s structural evolution is dominated by occasional dramatic shifts in otherwise steady trends. These behaviors are not distributed evenly across the network; stark differences in evolution can be observed between two major subnetworks, loosely thought of as “pure” and “applied”, which approximately partition the aggregate. The paper characterizes two major events along the mathematics network trajectory and discusses possible explanatory factors.     

Digital image correlation techniques to investigate strain fields and cracking phenomena in asphalt materials

This paper is the outcome of a specific task group of the RILEM Technical Committee 241-MCD “Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements”. The group on “Advanced Measurement Techniques” was established in 2011 to investigate DIC applications for non-destructive and non-contact measurements of strain fields during laboratory testing. The paper illustrates different DIC/optical flow applications in measuring strain distribution during laboratory testing. Specific applications of DIC for evaluating crack initiation and crack propagation in asphalt materials are presented.