A pilot study of lithium carbonate plus divalproex sodium for the continuation and maintenance treatment of patients with bipolar I disorder

PURPOSE OF STUDY: To assess whether selected periapical radiographs, taken according to High Yield Criteria, can reveal as much intra-osseous pathology as universal panoramic screening. POPULATION STUDIED: The records of 1101 RAF recruits enlisted in 1988-89, average age 19 years (range 16-26). METHODS: The clinical records and bitewing radiographs of the recruits were examined and the requirement for periapical radiographs determined according to high yield criteria. A template, cut out to simulate the area covered by a periapical bitewing radiograph, was placed over the suspect region on the panoramic film and any findings found within the template recorded. The entire dental panoramic tomograph was then examined on a masked screen under 2X magnification and any further findings recorded. FINDINGS: There was a considerable number of findings reported, including three large isolated radiolucent areas, 75 periradicular radiolucent areas, four probable cysts and 1187 unerupted mandibular third molars. However, when the clinical significance of these 'lesions' was assessed only those related to dental causes appeared to have significant clinical implications and the results indicated that these could have been detected by selective radiology. CONCLUSION: This study showed that the only pathology which occurs frequently enough to justify radiographic screening of the jaws in young adults is related to teeth. It seems probable that this type of pathology can be at least as well detected by selective periapical screening, using high yield criteria, as is possible by universal panoramic screening.     

Selectively regrown contacts to field-effect transistors withtwo-dimensional electron-gas channels

The authors have fabricated for the first time heterostructure field-effect transistors where the two-dimensional electron gas (2-DEG) channel is directly contacted by selectively regrown epitaxial GaAs contacts. Both modulation-doped FETs (MODFETs) and semiconductor-insulator-semiconductor FETs (SISFETs) were fabricated. Contact resistances were low, as evidenced by high transconductances and improvements to the transconductance at low temperatures. The low resistance and shallow nature of the regrown contacts should permit scaling of these structures to very small dimensions     

Characterization and sintering of BaZrO3 nanoparticles synthesized through a single-step combustion process

Barium zirconate (BaZrO₃) nanoparticles synthesized by a self-sustained single-step combustion process is reported in this paper. In this process, a phase pure nanopowder of BaZrO₃ has been obtained by the combustion of an aqueous solution containing Ba and Zr ions by using citric acid as complexing agent and liquor ammonia as fuel, thus giving rise to phase pure BaZrO₃ nanopowder in a single-step combustion without any further calcination. The X-ray diffraction studies have shown that the as-prepared powder was single phase, crystalline, and has a cubic perovskite structure (ABO₃) with a lattice constant a = 4.19 Å. The average particle size calculated from FWHM is 30 nm. The phase purity of BaZrO₃ nanopowder has been examined using differential thermal analysis (DTA), thermo gravimetric analysis (TGA) and Fourier transform of infrared spectroscopy (FTIR). The transmission electron microscopic investigation has shown that the particle size of the as-prepared powder was in the range 30–50 nm with a mean size of 40 nm. The nano BaZrO₃ has been sintered to a density of 99% of the theoretical density at 1650 °C in 2 h without the use of any sintering aids. The morphology of the sintered pellets has been studied with scanning electron microscopy (SEM). The dielectric constant (_r) and loss factor (tan δ) values obtained at 10 MHz for a well-sintered barium zirconate pellet has been found to be 32.2 and 1 × 10⁻⁴, respectively, at room temperature.     

New Jersey Acts on Energy and Climate Change [Living with Technology]

An unusual aspect of this conference was its focus on state-level energy and climate policies. The lack of federal leadership on these issues within the U.S.A. has opened a window of opportunity at the state level for policy entrepreneurs. California acted in 2005 with an executive order establishing greenhouse gas emission reduction targets, ratified in 2006 by the state legislature. New Jersey acted in 2007, helped along by the fact-finding, target-setting effort leading to this conference. The thoughtful discussions and careful analysis that played out during 2006 and early 2007 played a role in giving policymakers and stake holders the confidence to act decisively. Thus, by February 2007, New Jersey's governor had penned an executive order setting two greenhouse gas targets: reduce emissions to 1990 levels by 2020, and reduce emissions to 80% below current levels by 2050.     

On the Issue of Incomplete and Missing Water-Quality Data in Mine Site Databases: Comparing Three Imputation Methods

Large water-quality databases are valuable for predicting mine drainage chemistry, identifying optimal measures for mitigation and remediation, and refuting/refining models and theories. However, such databases often have missing values due to periodic lack of sampling and analysis or input errors. These missing values lead to problems in machine learning and statistical analysis of water-quality data from mine sites. Using water-quality data collected from 1971 to 1994 from many locations at a copper-molybdenum-gold-silver-rhenium mine site, we compared three imputation methods to estimate missing water-quality data: iterative robust model-based imputation (IRMI), multiple imputations of incomplete multivariate data (AMELIA), and sequential imputation for missing values (IMPSEQ). These methods were evaluated based on mean absolute error, relative absolute error, and percent bias techniques. The results showed that IMPSEQ and IRMI are suitable to impute missing values in water-quality databases at mine sites, whereas AMELIA is not.     

Synthesis,Characterization, and Spectroscopic Analysis of NdxY1−xTiNbO6 Microwave Ceramics

Solid solutions of Nd_xY_1−xTiNbO₆ ceramics were prepared through the solid-state ceramic route. The materials were calcined at 1250°C and sintered in the range 1400–1550°C. The structure of the system was analyzed using the X-ray diffraction and vibrational spectroscopic analysis. The morphology and the sintering behavior of the samples were analyzed using scanning electron microscopy. The dielectric constant (ɛ_r), temperature coefficient of resonant frequency (τ_f), and the unloaded quality factor (Q_u) were measured in the microwave frequency region using the cavity resonator method. The ɛ_r and τ_f increased with an increase in the concentration of Nd in the solid solutions. Nearly zero temperature coefficient of resonant frequency was obtained for the Nd_0.6Y_0.4TiNbO₆ ceramic. Samples are of high quality factor and are useful for microwave applications.