The determination of soya and meat protein in raw and processed meat products by specific peptide analysis. An evaluation

The detection and measurement of characteristic peptides formed on enzymatic hydrolysis of soya protein products, meats and offals is described. Samples were heated at 120°C for 3h prior to digestion with trypsin overnight, and the resultant peptide mixtures passed through an Amicon ultrafiltration membrane. After concentration the ultrafiltrates were analysed by ion exchange chromatography on Aminex A5 resin. Peptides were detected by post-column reaction with ninhydrin. Characteristic peaks designated SP 2 and MP 1 were seen in chromatograms of digests of soya protein isolate and beef respectively, and these peaks were well resolved in beef and soya protein isolate mixtures. The SP 2 peak was shown to contain peptides derived from soya 11 S globulin. The soya protein and beef contents of a series of mixtures of freeze-dried, defatted beef and soya protein isolate were determined by measurement of the SP 2 and MP 1 peaks respectively. Soya protein content could be determined within 2% of the true value over the range 30–70% soya protein isolate and beef content could be determined within 5% of the true value in the range 20–100% beef. Analysis of five soya protein isolates, four soya protein concentrates, six soya flours and 13 textured soya products indicated considerable interproduct variation in the yield of SP 2. The MP 1 peak was seen in a range of meats, both cooked and raw. It was also present in digests of offals which contained smooth or striated muscle but not in ‘non-muscle’ offals. The protein origin of the MP 1 peak was not established but the yield appeared lower in meat products which had been heated during manufacture than in those which had received no such treatment. Analysis of a series of laboratory prepared canned and heated pork and soya protein isolate mixtures enabled the pork content to be determined to within 8% of the true value, 2% soya protein isolate could be detected but not quantified accurately.     

MR spectroscopy as a tool for in vivo determination of steatosis in liver transplant recipients

Object  

Among several non-invasive methods of liver fat analysis, the most important role is played by MR imaging and spectroscopy (MRS). This study describes the 1H MRS at 3T measurement of liver fat volume fraction f_fat{\phi_{{\rm fat}}} in a group of liver transplant patients, an at-risk group for the development of de novo steatosis.     

Raman and infrared spectroscopy of Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript> - BaTiO<Subscript>3</Subscript> ceramics

Lead-free Na_0.5Bi_0.5TiO₃ -BaTiO₃ ceramics have been prepared in the whole range of concentrations and studied at room-temperature by means of X-ray, Raman scattering and infrared techniques. X-ray measurements revealed rhombohedral, rhombohedral-tetragonal boundaries and tetragonal modifacations depending on the contents of BaTiO₃. The distinct changes of the Raman and infrared spectra with increasing of BaTiO₃ content, which were correlated with X-ray results, were observed. The broad phonon spectra indicated the disorder in the A site of Na_0.5Bi_0.5TiO₃ -BaTiO₃ system.     

Nanostructured nanoparticles of self-assembled lipid pro-drugs as a route to improved chemotherapeutic agents

We demonstrate that oral delivery of self-assembled nanostructured nanoparticles consisting of 5-fluorouracil (5-FU) lipid prodrugs results in a highly effective, target-activated, chemotherapeutic agent, and offers significantly enhanced efficacy over a commercially available alternative that does not self-assemble. The lipid prodrug nanoparticles have been found to significantly slow the growth of a highly aggressive mouse 4T1 breast tumour, and essentially halt the growth of a human MDA-MB-231 breast tumour in mouse xenografts. Systemic toxicity is avoided as prodrug activation requires a three-step, enzymatic conversion to 5-FU, with the third step occurring preferentially at the tumour site. Additionally, differences in the lipid prodrug chemical structure and internal nanostructure of the nanoparticle dictate the enzymatic conversion rate and can be used to control sustained release profiles. Thus, we have developed novel oral nanomedicines that combine sustained release properties with target-selective activation.     

Stability of a chitosan layer deposited onto a polyethylene surface

A two‐step procedure was applied to obtain antimicrobial films; this procedure involved a corona treatment of the polyethylene (PE) surface and its chemical activation with 1‐ethyl‐3‐[3‐dimethylaminopropyl] carbodiimide hydrochloride and N‐hydroxysuccinimide, and this led to the covalent bonding of chitosan on the PE surface. Electrochemical methods were used to investigate the stability of the deposited chitosan layer. The potentiometric and polyelectrolyte titrations showed that some amount of chitosan desorbed faster from the surface until equilibrium was reached and also that the grafted chitosan layer was more stable than the physically adsorbed one. The chitosan immobilized on the PE surface exhibited the expected antibacterial activity when tested against three bacteria, which included two Gram‐negative bacteria, Salmonella enteritidis and Escherichia coli, and one Gram‐positive bacterium, Listeria monocytogenes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2444–2457, 2013     

Capacity commitment and price volatility in a competitive electricity market

The long lead time required to add new capacity in the electricity generation industry means that daily demands are necessarily served by capacity already installed. However, in a competitive market, even if the installed capacity was designed to serve the projected demands, frequent surpluses and occasional full utilization inevitably lead to price volatility. This paper develops a two-stage model of the generation market in which capacity construction occurs in stage 1, before demand realization, and price determination occurs in stage 2, when the equilibrium price ensures that the realized demand does not exceed the installed capacity. We show that price volatility and price spikes are inevitable, and that while price capping can mitigate high and volatile prices, it causes unmet demands and reduction in system reliability. This paper accentuates the interdependence among generating capacity, price volatility and service reliability, a primary cause of concern in the debate on electricity market reform.     

Towards a deeper understanding of plastic deformation in mono-crystalline silicon

This paper investigates the plastic deformation in mono-crystalline silicon under complex loading conditions. With the aid of various characterization techniques, it was found that the mechanism of plasticity in silicon is complex and depends on loading conditions, involving dislocations, phase transformations and chemical reactions. In general, plastic deformation in silicon is the coupled result of mechanical deformation controlled by the stress field applied, chemical reaction determined by the external loading environment, and mechanical–chemical interaction governed by both the loading type and environment. Temperature rise accelerates the penetration of oxygen into silicon and reduces the critical stress of plastic yielding. When the chemical effect is avoided, the initiation of plasticity is enabled by octahedral shear stress but the further development of plastic deformation is influenced by hydrostatic stress. Plasticity of silicon in the form of phase transformations, e.g., from the diamond to amorphous or from the amorphous to bcc structures, is determined by loading history.     

Sugar fatty acid ester surfactants: Structure and ultimate aerobic biodegradability

Ultimate aerobic biodegradabilities of an array of sugar ester surfactants were determined by International Standards Organisation method 7827, “Water Quality—Evaluation in an Aqueous Medium of the Aerobic Biodegradability of Organic Compounds, Method by Dissolved Organic Carbon” (1984). The surfactants were nonionic sugar esters with different-sized sugar head groups (formed from glucose, sucrose, or raffinose) and different lengths and numbers of alkyl chains [formed from lauric (C₁₂) or palmitic (C₁₆) acid]. Analogous anionic sugar ester surfactants, formed by attaching an α-sulfonyl group adjacent to the ester bond, and sugar esters with α-alkyl substituents were also studied. It was found that variations in sugar head group size or in alkyl chain length and number do not significantly affect biodegradability. In contrast, the biodegradation rate of sugar esters with α-sulfonyl or α-alkyl groups, although sufficient for them to be classified as readily biodegradable, was dramatically reduced compared to that of the unsubstituted sugar esters. An understanding of the relationship between structure and biodegradability provided by the results of this study will aid the targeted design of readily biodegradable sugar ester surfactants for use in consumer products.     

Octanoic Acid—An Insecticidal Metabolite of Conidiobolus coronatus (Entomopthorales) That Affects Two Majors Antifungal Protection Systems in Galleria mellonella (Lepidoptera): Cuticular Lipids and Hemocytes

The food flavour additive octanoic acid (C8:0) is also a metabolite of the entomopathogenic fungus Conidiobolus coronatus, which efficiently infects and rapidly kills Galleria mellonella. GC-MS analysis confirmed the presence of C8:0 in insecticidal fraction FR3 extracted from C. coronatus filtrate. Topical administration of C8:0 had a dose-dependent effect on survival rates of larvae but not on pupation or adult eclosion times of the survivors. Topically applied C8:0 was more toxic to adults than larvae (LD100 for adults 18.33 ± 2.49 vs. 33.56 ± 2.57 µg/mg of body mass for larvae). The administration of C8:0 on the cuticle of larvae and adults, in amounts corresponding to their LD50 and LD100 doses, had a considerable impact on the two main defense systems engaged in protecting against pathogens, causing serious changes in the developmental-stage-specific profiles of free fatty acids (FFAs) covering the cuticle of larvae and adults and damaging larval hemocytes. In vitro cultures of G. mellonella hemocytes, either directly treated with C8:0 or taken from C8:0 treated larvae, revealed deformation of hemocytes, disordered networking, late apoptosis, and necrosis, as well as caspase 1–9 activation and elevation of 8-OHdG level. C8:0 was also confirmed to have a cytotoxic effect on the SF-9 insect cell line, as determined by WST-1 and LDH tests.     

The Role of CXCL16 in the Pathogenesis of Cancer and Other Diseases

CXCL16 is a chemotactic cytokine belonging to the α-chemokine subfamily. It plays a significant role in the progression of cancer, as well as the course of atherosclerosis, renal fibrosis, and non-alcoholic fatty liver disease (NAFLD). Since there has been no review paper discussing the importance of this chemokine in various diseases, we have collected all available knowledge about CXCL16 in this review. In the first part of the paper, we discuss background information about CXCL16 and its receptor, CXCR6. Next, we focus on the importance of CXCL16 in a variety of diseases, with an emphasis on cancer. We discuss the role of CXCL16 in tumor cell proliferation, migration, invasion, and metastasis. Next, we describe the role of CXCL16 in the tumor microenvironment, including involvement in angiogenesis, and its significance in tumor-associated cells (cancer associated fibroblasts (CAF), microglia, tumor-associated macrophages (TAM), tumor-associated neutrophils (TAN), mesenchymal stem cells (MSC), myeloid suppressor cells (MDSC), and regulatory T cells (T_reg)). Finally, we focus on the antitumor properties of CXCL16, which are mainly caused by natural killer T (NKT) cells. At the end of the article, we summarize the importance of CXCL16 in cancer therapy.