Introducing Grain Boundary Influenced Stochastic Effects into Constitutive Models

Twinning is an important deformation mechanism in hexagonal close-packed (hcp) metals such as Mg, Zr, Ti, and Be. Twinning in hcp materials is a multiscale process that depends on microstructural and mechanical response details at the mesoscale, microscale, and atomic scales. Twinning can generally be understood as a two-step process, a nucleation step followed by propagation. The nucleation of twins is governed by both material details such as the defect configurations at potential nucleation sites within grain boundaries, as well as the highly local mechanical field near grain boundaries. These two factors, the material and mechanical, must align for a successful nucleation event. In this article, we present a stochastic constitutive law for nucleation of twins and describe its implementation into a homogenized crystal plasticity simulation. Twin nucleation relies on the dissociation of grain boundary defects under stress into the required twinning partials. This dissociation is considered to follow a Poisson process where the parameters of the Poisson distribution are related to the properties of the grain boundaries. The rate of the process is a direct function of the local stress concentration at the grain boundary. These stress concentrations are randomly sampled from a distribution calibrated to full-field crystal plasticity simulations.     

Mapping dislocation nucleation behavior from bimetal interfaces

Interfaces between two dissimilar metals have been observed to exhibit a range of atomic structures, from atomically flat to atomically stepped. Using atomic-scale simulation and theory, we study the influence of the intrinsic bimetal interface structure on the nucleation of lattice dislocations. Interface structure is found to have a strong effect on which dislocations are nucleated and the type of nucleation site. We develop a theoretical model that provides criteria for predicting these effects based on key structural relationships between the interface and adjoining crystals. In recognition of these critical conditions, we construct a map that identifies the most likely nucleation site from a given interface. The theory and map developed here can guide efforts to tune interface structures for controlling the strength and deformation of heterogeneous materials.     

Scleroderma-like Impairment in the Network of Telocytes/CD34+ Stromal Cells in the Experimental Mouse Model of Bleomycin-Induced Dermal Fibrosis

Considerable evidence accumulated over the past decade supports that telocytes (TCs)/CD34⁺ stromal cells represent an exclusive type of interstitial cells identifiable by transmission electron microscopy (TEM) or immunohistochemistry in various organs of the human body, including the skin. By means of their characteristic cellular extensions (telopodes), dermal TCs are arranged in networks intermingled with a multitude of neighboring cells and, hence, they are thought to contribute to skin homeostasis through both intercellular contacts and releasing extracellular vesicles. In this context, fibrotic skin lesions from patients with systemic sclerosis (SSc, scleroderma) appear to be characterized by a disruption of the dermal network of TCs, which has been ascribed to either cell degenerative processes or possible transformation into profibrotic myofibroblasts. In the present study, we utilized the well-established mouse model of bleomycin-induced scleroderma to gain further insights into the TC alterations found in cutaneous fibrosis. CD34 immunofluorescence revealed a severe impairment in the dermal network of TCs/CD34⁺ stromal cells in bleomycin-treated mice. CD31/CD34 double immunofluorescence confirmed that CD31⁻/CD34⁺ TC counts were greatly reduced in the skin of bleomycin-treated mice compared with control mice. Ultrastructural signs of TC injury were detected in the skin of bleomycin-treated mice by TEM. The analyses of skin samples from mice treated with bleomycin for different times by either TEM or double immunostaining and immunoblotting for the CD34/α-SMA antigens collectively suggested that, although a few TCs may transition to α-SMA⁺ myofibroblasts in the early disease stage, most of these cells rather undergo degeneration, and then are lost. Taken together, our data demonstrate that TC changes in the skin of bleomycin-treated mice mimic very closely those observed in human SSc skin, which makes this experimental model a suitable tool to (i) unravel the pathological mechanisms underlying TC damage and (ii) clarify the possible contribution of the TC loss to the development/progression of dermal fibrosis. In perspective, these findings may have important implications in the field of skin regenerative medicine.     

Cellular Integrin α5β1 and Exosomal ADAM17 Mediate the Binding and Uptake of Exosomes Produced by Colorectal Carcinoma Cells

Approximately 25% of colorectal cancer (CRC) patients develop peritoneal metastasis, a condition associated with a bleak prognosis. The CRC peritoneal dissemination cascade involves the shedding of cancer cells from the primary tumor, their transport through the peritoneal cavity, their adhesion to the peritoneal mesothelial cells (PMCs) that line all peritoneal organs, and invasion of cancer cells through this mesothelial cell barrier and underlying stroma to establish new metastatic foci. Exosomes produced by cancer cells have been shown to influence many processes related to cancer progression and metastasis. In epithelial ovarian cancer these extracellular vesicles (EVs) have been shown to favor different steps of the peritoneal dissemination cascade by changing the functional phenotype of cancer cells and PMCs. Little is currently known, however, about the roles played by exosomes in the pathogenesis and peritoneal metastasis cascade of CRC and especially about the molecules that mediate their interaction and uptake by target PMCs and tumor cells. We isolated exosomes by size−exclusion chromatography from CRC cells and performed cell-adhesion assays to immobilized exosomes in the presence of blocking antibodies against surface proteins and measured the uptake of fluorescently-labelled exosomes. We report here that the interaction between integrin α5β1 on CRC cells (and PMCs) and its ligand ADAM17 on exosomes mediated the binding and uptake of CRC-derived exosomes. Furthermore, this process was negatively regulated by the expression of tetraspanin CD9 on exosomes.     

Inherited Retinal Diseases Due to RPE65 Variants: From Genetic Diagnostic Management to Therapy

Inherited retinal diseases (IRDs) are a heterogeneous group of conditions that include retinitis pigmentosa (RP) and Leber congenital amaurosis (LCA) and early-onset severe retinal dystrophy (EO[S]RD), which differ in severity and age of onset. IRDs are caused by mutations in >250 genes. Variants in the RPE65 gene account for 0.6–6% of RP and 3–16% of LCA/EORD cases. Voretigene neparvovec is a gene therapy approved for the treatment of patients with an autosomal recessive retinal dystrophy due to confirmed biallelic RPE65 variants (RPE65-IRDs). Therefore, the accurate molecular diagnosis of RPE65-IRDs is crucial to identify ‘actionable’ genotypes—i.e., genotypes that may benefit from the treatment—and is an integral part of patient management. To date, hundreds of RPE65 variants have been identified, some of which are classified as pathogenic or likely pathogenic, while the significance of others is yet to be established. In this review, we provide an overview of the genetic diagnostic workup needed to select patients that could be eligible for voretigene neparvovec treatment. Careful clinical characterization of patients by multidisciplinary teams of experts, combined with the availability of next-generation sequencing approaches, can accelerate patients’ access to available therapeutic options.     

Hot corrosion behaviour of 7YSZ + Gd2O3 nano-composites in molten salts prepared by spark plasma sintering

This study compares the hot corrosion performance of yttria-stabilised zirconia (7YSZ), and 7YSZ?+?Gd₂O₃ composite samples in the presence of molten mixture of Na₂SO₄?+?V₂O₅ at 1150°C. For 7YSZ, the reaction between NaVO₃ and Y₂O₃ produces YVO₄ and leads the transformation of tetragonal ZrO₂ to monoclinic ZrO₂. A high-density in sintered 7YSZ?+?Gd₂O₃ samples, led minor amounts of monoclinic ZrO₂ and tetragonal GdVO₄ as the hot corrosion products with only traceable amounts of YVO₄, and a stable corroded layer was formed. Due to the synergic effect of doping of zirconia with Gd₂O₃, the 7YSZ?+?Gd₂O₃ sample has a much better hot corrosion crack resistance than 7YSZ.     

Low prevalence of Listeria monocytogenes in cull sows and pork

The goal of this study was to determine the prevalence of Listeria monocytogenes in sows slaughtered at a single Midwestern plant on two occasions (trial 1, n = 179 sows; trial 2, n = 160 sows). Fecal samples collected antemortem (trial 1) as well as animal tissues, and carcass swabs collected at the abattoir (trials 1 and 2) were analyzed. Eight isolates of L. monocytogenes were recovered from five samples that represented 0.18% of the total samples (n = 2,775). In trial 1, L. monocytogenes was detected in a tonsil sample (0.6%; 1 positive of 181 tonsils), in a carcass (0.6%; 1 positive of 179 carcasses), which was sampled prior to the organic rinse, and in two chopped meat block samples (1.2%; 2 positive of 165 samples). In trial 2, L. monocytogenes was only detected in a single chopped meat block sample (0.15%; 1 positive of 688 total samples). These data indicate the low prevalence of L. monocytogenes in the cull sow.     

A laboratory assessment of the impact of brewery wastewater discharge on sulfide and methane production in a sewer

The impact of brewery wastewater discharge on sulfide and methane production in a sewer was assessed. Experiments were carried out on laboratory scale sewer reactors consisting of both an experimental and a control reactor. The control reactor was intermittently fed with real fresh sewage while the experimental reactor was fed with a mixture of brewery and domestic wastewater at two different proportions (10 and 25% v/v). 10% v/v discharge of brewery wastewater increased the H2S and CH4 production rates in the sewer reactor by 40% and 30%, respectively. When the brewery wastewater fraction was increased to 25% v/v, the H2S production rate of the experimental reactor decreased to the level of the control reactor. In contrast, the CH4 production rate maintained at a level that was 30% higher than that in the control reactor. These results indicate that the discharge of brewery wastewater into sewers can give negative impacts in relation to odour and corrosion management of the systems and will increase the greenhouse gas emissions from sewers. The study also reveals that the impact of trade waste on the biological reactions in sewers is complex, and requires careful experimental assessment in each case.     

Particle shape control using pulse electrodeposition: Methanol oxidation as a probe reaction on Pt dendrites and cubes

Shape controlled Pt particles were synthesized onto tungsten monocarbide (WC) substrates using a pulse electrodeposition method. The particle shape was strongly influenced by the deposition potential, with cubic particles formed using 0.14 V vs. NHE (normal hydrogen electrode) and dendritic particles formed at 0.04 V vs. NHE. The crystalline orientation and active surface area of the Pt particles were estimated using Cu stripping voltammetry. Finally, cyclic voltammetry and chronoamperometry were used to determine the methanol electrooxidation activity, which revealed that the dendritic Pt showed much higher electrochemical activity than the cubic particles. These results demonstrated the possibility of more effectively utilizing Pt electrocatalysts by controlling the shape of Pt particles.     

Oxide/polymer interfaces for hybrid and organic solar cells: Anatase vs. Rutile TiO2

In this work, we study the effect of the transparent conducting oxide (TCO) and the polymer applied (MEH-PPV or P3HT) on the photovoltaic properties of TCO/TiO₂/polymer/Ag bi-layer solar cells. The solar cells were analyzed under inert atmosphere conditions resembling an encapsulated or sealed device. We demonstrate that the substrate applied, ITO or FTO, modifies the crystalline structure of the TiO₂: on an ITO substrate, TiO₂ is present in its anatase phase, on an FTO, the rutile phase predominates. Devices fabricated on an FTO, where the rutile phase is present, show better stability under inert atmospheres than devices fabricated on an ITO, anatase phase. With respect to the polymer, devices based on MEH-PPV show higher Voc (as high as 1 V), while the application of P3HT results in lower Voc, but higher J_sc and longer device stability. These observations have been associated to (a), the crystalline structure of TiO₂ and (b) to the form the polymer is bonded to the TiO₂ surface. In-situ IPCE analyses of P3HT-based solar cells show a red shift on the peak corresponding to TiO₂, which is not present on the MEH-PPV-based solar cells. The latter suggest that P3HT can be linked to the TiO₂ though the S-end atom, which results in devices with lower Voc. All these observations are also valid for devices, where the bare TiO₂ is replaced by an Nb-TiO₂. The application of an Nb-TiO₂ with rutile structure in these polymer/oxide solar cells is the reason for their higher stability under inert atmospheres. We conclude that the application of TiO₂ in its rutile phase is beneficial for long-term stability devices. Moreover there is an interplay between low Voc and J_sc in devices applying P3HT, since power conversion efficiency can be partially canceled by their lower Voc in comparison with MEH-PPV. These findings are important for polymer/oxide solar cells, but also for organic solar cells, where a layer of semiconductor oxides are in direct contact with a polymer, like in an inverted or tandem organic solar cells.