Effects of 17 beta-estradiol on nitric oxide and ventricular myocardium metabolism

BACKGROUND: Arrhythmias are frequent pathology in patients with chronic hemodialysis. We evaluated whether a relatively new technique, signal averaging, could be useful in predicting the development of complex arrhythmias in these patients. METHODS: Thirty-three patients, 18 male and 15 female, subjected to thrice weekly chronic hemodialytic treatment with various dialysis techniques, were studied. Exclusion criteria were the presence of antiarrhythmic and inotropic treatment. The following examinations were carried out in all patients: a Holter dynamic electrocardiography for a duration of 24 hours, begun on the day of dialysis, high resolution ECG pre- and post-dialysis to find out if there were any ventricular late potential (VLP). Four hundred beats were examined in order to obtain a background noise of less than 0.7 microV and a better definition of the signal. The following parameters were considered significant for the presence of VLP: a) filtered QRS duration > 120 msec; b) the root mean square of the signal expressed in the terminal portion of QRS (RMS) < 25 microV) high frequency low amplitude signals duration (HFLA) > 40 msec. A positive value in two of these parameters was considered indicative of the presence of VLP. In addition various pre and post-dialysis indices of dialytic efficiency and a mono and two-dimensional echocardiogram with pulsed and color Doppler were carried out. Of the 33 patients studied, ten were excluded because they presented too high a background noise at the high resolution ECG. Of the remaining 23 patients, 13 (56%) presented VLP and nine of these (69%) presented complex arrhythmias. Of the ten patients without VLP, 5 (50%) presented complex arrhythmias. The incidence of arrhythmias was highest during the last two hours of dialysis and in the two hours following it. The patients were then divided into two groups (A and B) according to the ejection fraction (EF) found at the echocardiogram. Group A was composed of 17 patients of whom 8 (47%) presented complex arrhythmias; group B (EF < 45%) was composed of the remaining six patients, who all presented complex arrhythmias. In group A nine patients (53%) out of 17 had LVP, in group B four out of six (66%) had it. All the patients except one presented an increase in the thickness of the ventricular wall and alterations of Doppler transmitral filling rate. Left ventricular hypertrophy was diagnosed in 22 out of the 23 patients. Four patients also had chronic ischaemic heart disease; of these three had LVP. There was no correlation between the presence of LVP and the hemodialytic indices and between the latter and complex arrhythmias. CONCLUSIONS: Our study showed that arrhythmias are more frequent in patients with LVP before dialysis than in those without. The difference was statistically significant (p < 0.006); the incidence of arrhythmias was higher in patients with FE < 45% (p < 0.001). The majority of patients (95%) had left ventricular hypertrophy; only four (17%) had ischaemic heart disease too. It is highly probable that the presence of LVP in our patients can be attributed to hypertension and subsequent left ventricular hypertrophy. As patients with LVP at the end of dialysis had a greater incidence of arrhythmias than those without LVP, we suggest that this method could be useful as a first screening in dialysed patients.     

Presupposition failure — A comedy of errors

Presuppositions of utterances are the pieces of information you convey with an utterance no matter whether your utterance is true or not. We first study presupposition in a very simple framework of updating propositional information, with examples of how presuppositions of complex propositional updates can be calculated. Next we move on to presuppositions and quantification, in the context of a dynamic version of predicate logic, suitably modified to allow for presupposition failure. In both the propositional and the quantificational case, presupposition failure can be viewed as error abortion of procedures. Thus, a dynamic assertion logic which describes the preconditions for error abortion is the suitable tool for analysing presupposition.     

液闪效率示踪法校正效果的评价

本文评价了Aloka商品液闪仪效率示踪法dpm校正的效果。轻,中度猝灭校正效果理想,具有简便、实用和适用性广泛的特点。严重化学和颜色猝灭样品的校正结果分别随猝灭增加而向增大和减小的方向偏离,形成喇叭状曲线,文中对这一现象给出初步解释。     

A novel cyclic process using CaSO<Subscript>4</Subscript>/CaS pellets for converting sulfur dioxide to elemental sulfur without generating secondary pollutants: Part I. Feasibility and kinetics of the reduction of sulfur dioxide with calcium-sulfide pellets

Certain new sulfide-smelting processes and coal-gasification processes generate high-strength sulfur dioxide streams, for which a new process for converting sulfur dioxide to elemental sulfur needs to be developed because no process exists that is generally and economically applicable to the treatment of such streams. A thermodynamic and experimental investigation to develop a new process for converting sulfur dioxide to elemental sulfur by a cyclic process involving calcium sulfide and calcium sulfate without generating secondary pollutants was carried out. In this process, the starting raw material, calcium sulfate, is reduced by a suitable reducing agent, such as hydrogen, to produce calcium sulfide, which is used to reduce sulfur dioxide to elemental sulfur vapor and calcium sulfate. The latter is, in turn, reduced to regenerate calcium sulfide. In this Part I, detailed experimental results are presented on the kinetics of the reaction between sulfur dioxide and calcium-sulfide pellets, which produces elemental sulfur and calcium sulfate. The experiments were carried out at temperatures between 1023 and 1088 K and sulfur-dioxide partial pressures between 9 and 60 kPa by the use of a thermogravimetric analysis (TGA) technique. The rate of this reaction was demonstrated by the conversion of 40 pct calcium-sulfide pellets obtained from the hydrogen reduction of fresh calcium sulfate in 10 minutes at 1073 K under a sulfur-dioxide partial pressure of 43 kPa. The reactivity decreased somewhat during the first three cycles but remained largely unchanged thereafter up to the tenth cycle. This characteristic of the pellets is important because the solids must be reusable for repeated cycles to avoid generating secondary pollutants. A pore-blocking model was found to fit the reaction rate. The reaction is first order with respect to sulfur-dioxide partial pressure and has an activation energy of 101 to 134 kJ/mol (24 to 32 kcal/mol) for calcium-sulfide pellets reacted and regenerated several different times. Sulfur dioxide-containing streams from certain sources, such as the regenerator off-gas from an integrated-gasification, combined-cycle, desulfurization unit and new sulfide-smelting plants, contain much higher partial pressures of SO₂. In these cases, the rate of the first reaction is expected to be proportionally higher than in the test conditions reported in this article. The reduction kinetics of calcium-sulfate pellets with hydrogen gas is reported in the accompanying Part II.     

OTDM transmitter using WDM-TDM conversion with an electroabsorptionwavelength converter

An all-optical multiplexing technique using wavelength division multiplexing (WDM)-time division multiplexing (TDM) conversion with an electroabsorption wavelength converter has been proposed and demonstrated. The effectiveness of this WDM-TDM conversion technique for various pulsewidth settings was experimentally investigated. The fluctuation of the signal performance, which was inevitably caused by the coherent crosstalk between adjacent pulses in the conventional optical time division multiplexing (OTDM) technique, were successfully suppressed, even in the case of wide pulse duration. High Q-factor performance has been maintained for a wide range of duty ration from 36% to 74%. By introducing this technique to the optical time division multiplexer, a highly stable and high-quality 40-Gb/s optical signal can be effectively produced without generating the short pulse or setting two tributaries at orthogonal polarization states, and without introducing high-speed electronics for signal multiplexing. The WDM-TDM conversion with an electroabsorption wavelength converter was extended to 60-Gb/s operation by using three 20-Gb/s tributaries. A clear eye opening was confirmed for a waveform after the WDM-TDM conversion of the 60-Gb/s signal     

Microbiological denitrification of red beet juice

The purpose of study was the determination of optimal conditions for red beet juice denitrification by Paracoccus denitrificans bacteria as well as the evaluation of the usefulness of microbiologically treated juice for the production of a natural colouring preparation for foods. Total reduction of nitrates was found during bacterial culturing at 25 and 30 °C, at an initial pH of 7.0-8.0 and juice osmotic pressure of 900-1100 mOsm/kg. Microbiological denitrification procedure affected colour, taste and aroma of the juice. However, the use of juice as food colouring and component was made feasible by acidification and partial evaporation of water together with volatile substances.     

Suspension force and mechanism of debris flows

The paper discusses the postulated suspension force, by which it is possible to explain some enigmatic phenomena observed in different types of mass movements. This force is generated in thick suspensions as a result of friction between sinking solid particles and static water. The suspension force is related to the seepage force but they have opposite directions. Both forces form flow networks. Having explained the suspension force, the paper describes how this influences the movement of material, particularly in debris flows. Enigmatic features and the mechanism of debris flows and lahars are explained by virtue of the suspension force. Electronic Publication     

Scheduling railway traffic at a construction site

We consider the problem of rescheduling trains in the case where one track of a railway section consisting of two tracks in opposing directions is closed due to construction activities. After presenting an appropriate model for this situation we derive a polynomial algorithm for the subproblem of finding an optimal schedule with minimal latenesss if the subsequences of trains for both directions outside the construction site are fixed. Based on this algorithm we propose a local search procedure for the general problem of finding good schedules and report test results for some real world instances. Received: December 8, 1999 / Accepted: May 2, 2001