Phytopathogenic organisms and mycotoxigenic fungi: Why do we control one and neglect the other? A biological control perspective in Malaysia

In this review, we present the current information on development and applications of biological control against phytopathogenic organisms as well as mycotoxigenic fungi in Malaysia as part of the integrated pest management (IPM) programs in a collective effort to achieve food security. Although the biological control of phytopathogenic organisms of economically important crops is well established and widely practiced in Malaysia with considerable success, the same cannot be said for mycotoxigenic fungi. This is surprising because the year round hot and humid Malaysian tropical climate is very conducive for the colonization of mycotoxigenic fungi and the potential contamination with mycotoxins. This suggests that less focus has been made on the control of mycotoxigenic species in the genera Aspergillus, Fusarium, and Penicillium in Malaysia, despite the food security and health implications of exposure to the mycotoxins produced by these species. At present, there is limited research in Malaysia related to biological control of the key mycotoxins, especially aflatoxins, Fusarium‐related mycotoxins, and ochratoxin A, in key food and feed chains. The expected threats of climate change, its impacts on both plant physiology and the proliferation of mycotoxigenic fungi, and the contamination of food and feed commodities with mycotoxins, including the discovery of masked mycotoxins, will pose significant new global challenges that will impact on mycotoxin management strategies in food and feed crops worldwide. Future research, especially in Malaysia, should urgently focus on these challenges to develop IPM strategies that include biological control for minimizing mycotoxins in economically important food and feed chains for the benefit of ensuring food safety and food security under climate change scenarios.     

Biomechanical analysis of rheumatoid arthritis of the wrist joint

The wrist is the most complex joint for virtual three-dimensional simulations, and the complexity is even more pronounced when dealing with skeletal disorders of the joint such, as rheumatoid arthritis (RA). In order to analyse the biomechanical difference between healthy and diseased joints, three-dimensional models of these two wrist conditions were developed from computed tomography images. These images consist of eight carpal bones, five metacarpal bones, the distal radius and ulna. The cartilages were developed based on the shape of the available articulations and ligaments were simulated via mechanical links. The RA model was developed accurately by simulating all ten common criteria of the disease related to the wrist. Results from the finite element (FE) analyses showed that the RA model produced three times higher contact pressure at the articulations compared to the healthy model. Normal physiological load transfer also changed from predominantly through the radial side to an increased load transfer approximately 5% towards the ulnar. Based on an extensive literature search, this is the first ever reported work that simulates the pathological conditions of the rheumatoid arthritis of the wrist joint.     

Structural and Optical Properties of Lead-Boro-Tellurrite Glasses Induced by Gamma-Ray

Spectrophotometric studies of lead borotellurite glasses were carried out before and after gamma irradiation exposure. The increasing peak on the TeO₄ bi-pyramidal arrangement and TeO₃₊₁ (or distorted TeO₄) is due to augmentation of irradiation dose which is attributed to an increase in degree of disorder of the amorphous phase. The structures of lead tellurate contain Pb₃TeO₆ consisting of TeO₃ trigonal pyramid connected by PbO₄ tetragonal forming a three-dimensional network. The decrease of glass rigidity is due to irradiation process which is supported by the XRD diffractograms results. The decreasing values of absorption edge indicate that red shift effect occur after irradiation processes. A shift in the optical absorption edge attributed to an increase of the conjugation length. The values of optical band gap, E_opt were calculated and found to be dependent on the glass composition and radiation exposure. Generally, an increase and decrease in Urbach’s energy can be considered as being due to an increase in defects within glass network.     

Conversion of oil palm trunk into bio-oil via treatment with subcritical water

Subcritical water was applied to produce bio-oil from a 21-year-old abandoned oil palm trunk (OPT). The effects of reaction temperature, time, part of trunk taken, and optimum reaction condition were investigated. Higher heating values (HHVs), CHNS/O elemental and GC-MS analysis were performed to characterize the bio-oil. The subcritical water temperatures were manipulated between 100?°C?and?370?°C with 10?°C intervals and the reaction time was varied between 6?s and 20?min. The maximum yield of bio-oil from subcritical water treatment of top and bottom part of OPT was 0.27 and 0.30?kg/kg-dry OPT, respectively. The optimum reaction time and temperature was 5?min and 330?°C. The highest HHV of the bio-oils derived from the top and bottom part of OPT was 33.2?MJ/kg and 26.4?MJ/kg, respectively. From GC-MS measurement, the bio-oil contained phenolic compounds. The bio-oil derived from OPT obtained from subcritical water treatment had high HHV and comparable to other liquid fuels.     

Improved cycling stability of V2O5 modified spinel LiMn2O4 cathode at high cut-off voltage for lithium-ion batteries

Spinel lithium manganese oxide, LiMn₂O₄ coated with V₂O₅ layer (labeled as LMO-VO) has been developed and its electrochemical performances as cathode material for lithium-ion batteries has been evaluated at high cut-off voltage (>4.5 V vs. Li/Li⁺) and compared with pristine LiMn₂O₄ (labeled as LMO). The crystal structure investigations show that LMO-VO has longer Li–O bond length for fast Li-ion diffusion kinetic process. The scanning electron microscopy results indicate that LMO-VO has finer particles and the V₂O₅ layer has been successfully coated on the LMO surface uniformly. The highly conductive V₂O₅ coating layer enhances the ionic conductivity of the LMO cathode, as evidenced by the significant drop of R_ct value from the Nyquist plot. Under high operating voltage, the cell employed with coated LMO shows exceptional cycling performance in capacity retention and potential difference. After 300 cycles, the capacity retention per cycle has been boosted from 99.90% to 99.94% by adopting the V₂O₅ coating layer. In addition, surface coating with V₂O₅ stabilizes the potential difference at very minimal change for a longer period. This convincingly proves that the V₂O₅ coating layer not only protects against hydrofluoric acid (HF) attack and greatly restrains the increase of cell polarization at high voltage.     

Nanoparticle filtration by electrospun polymer fibers

Polyacrylonitrile (PAN) fibers with mean diameters in 270-400 nm range were prepared by electrospinning for use as a filter media. Compared to commercial filters made of polyolefin and glass, the fibers of electrospun filters were more uniform in diameter. The performance of electrospun filters was evaluated by measuring the penetration of monodisperse NaCl nanoparticles (below 80 nm in size) through the filters. It was found that electrospun filters could be made which had nanoparticle penetration values comparable to commercial filters but with substantially less filter mass. The penetration of nanoparticles through the electrospun filter media could be reduced by increasing the filter thickness, which is controlled by the collection time during the electrospinning process. Nanoparticle collection by electrostatic forces was found to be negligible for electrospun filters. Filter quality factors and single fiber collection efficiencies were found to be independent of filter thickness for electrospun filters, and the penetration of nanoparticles through electrospun filters was in better agreement with theoretical predictions than was the measured penetration through a commercial filter. This study shows that electrospinning is a promising technology for the production of high performance nanoparticle filters.     

Development of granular sludge for textile wastewater treatment

Microbial granular sludge that is capable to treat textile wastewater in a single reactor under intermittent anaerobic and aerobic conditions was developed in this study. The granules were cultivated using mixed sewage and textile mill sludge in combination with anaerobic granules collected from an anaerobic sludge blanket reactor as seed. The granules were developed in a single sequential batch reactor (SBR) system under alternating anaerobic and aerobic condition fed with synthetic textile wastewater. The characteristics of the microbial granular sludge were monitored throughout the study period. During this period, the average size of the granules increased from 0.02 ± 0.01 mm to 2.3 ± 1.0 mm and the average settling velocity increased from 9.9 ± 0.7 m h⁻¹ to 80 ± 8 m h⁻¹. This resulted in an increased biomass concentration (from 2.9 ± 0.8 g L⁻¹ to 7.3 ± 0.9 g L⁻¹) and mean cell residence time (from 1.4 days to 8.3 days). The strength of the granules, expressed as the integrity coefficient also improved. The sequential batch reactor system demonstrated good removal of COD and ammonia of 94% and 95%, respectively, at the end of the study. However, only 62% of color removal was observed. The findings of this study show that granular sludge could be developed in a single reactor with an intermittent anaerobic-aerobic reaction phase and is capable in treating the textile wastewater.     

The extractability of winged bean (Psophocarpus tetragonolobus) seed trypsin inhibitors

The extractability of winged bean (Psophocarpus tetragonolobus) seed trypsin inhibitors by aqueous salt solution varies with pH as well as the ionic strength of the extraction medium. With a high ionic strength extraction medium, the extractability of the seed trypsin inhibitors increases with rising pH. With a low ionic strength extraction medium, however, a region of minimum extractability of trypsin inhibitors was observed at pH 4. At pH above 7, the same maximum amount of trypsin inhibitors (1.47 million inhibitor units (i.u.) per 100 g of seed meal) was extracted with both high and low ionic strength extraction media. The solution characteristics of winged bean seed proteins exhibited similar trends. Ninety-five per cent of the extracted seed trypsin inhibitors could be precipitated from 30–70% saturated ammonium sulphate solutions. The winged bean seed trypsin inhibitors isolated by ammonium sulphate fractionation lost all inhibitory activity when heated at 100°C for 10 min at alkaline pH.