Influence of Electron Beam Irradiation and Coupling Agents on the Thermal Stability of Sugar Cane Bagasse Fiber-Thermoplastics Scrape Composite

The influence of blending of sugar cane bagasse with thermoplastics scrape as well as incorporation of some coupling agents has been conducted using thermogravimetric analysis (TGA). In addition, the effect of electron beam preirradiation of low density polyethylene on the properties of the bagasse-LDPE composite was also studied. Simulation of TGA data reveals that the presence of bagasse fiber accelerates the volatilization of either polypropylene or polyvinylchloride. On the other hand, polyethylene and polystyrene were stable against the heat evolved during the pyrolysis of bagasse fibers. Also, it was found that incorporation of a mixture of pentaerithrol tetraacrylate (PETA) and dicumyl peroxide (DCP) as coupling agents improve the thermal stability of low density polyethylene whereas the role of irradiation was insignificant. Moreover, pronounced enhancement in the thermal stability was detected in polypropylene followed by polystyrene and polyvinylchloride on using PETA.     

Properties of Ferrite-Filled Natural Rubber Composites

Nickel zinc ferrite (Ni-ZnFe₂O₄)-filled natural rubber (NR) composite was prepared at various loading of ferrite. The tensile properties included in this study were tensile strength, tensile modulus and elongation at break. The tensile strength and elongation at break of the composites increased up to 40 parts per hundred rubber (phr) of ferrite and then decreased at higher loading whereas the tensile modulus was increased gradually with increasing of ferrite loading. Scanning electron microscopy (SEM) was used to determine the wettability of filler in rubber matrix. From the observation, the increase of filler loading reduced the wettability of the filler. Thermal stability of the composites was conducted by using a thermogravimetry analyser (TGA). The incorporation of ferrite in NR composites enhanced the thermal stability of NR composites. The swelling test results indicate that the swelling percentage of the composites decreased by increasing of ferrite loading. The initial permeability, μ_i and quality factor, Q of magnetic properties of NR composites achieved maximum value at 60 phr of ferrite loading for frequency range between 5000–40,000 kHz. The maximum impedance, Z _max of the NR composites was at the highest value at 80 phr ferrite loading for frequency range between 200–800 MHz.     

Preparation and Characterization of Ethylene Vinyl Acetate (EVA)/Natural Rubber (SMR L)/Organoclay Nanocomposites: Effect of Blending Sequences and Organoclay Loading

Ethylene vinyl acetate (EVA)/natural rubber (SMR L)/organoclay thermoplastic elastomer nanocomposites were melt compounded in an internal mixer, Haake Rheometer, at 120°C and 50 rpm rotor speed. In this paper, we demonstrate the effect of different blending sequences and organoclay loading from 2 to 10 phr (parts per hundred resins) on the tensile properties, morphology, thermal degradation, flammability, and water absorption behavior of EVA/SMR L/organoclay nanocomposites. EVA/SMR L/organoclay TPE nanocomposites were prepared by three different blending sequences, and each exhibited different tensile properties. Results indicated that the presence of organoclay increases the tensile properties, resistance toward thermal degradation, resistance to water permeation, and flame retardancy for all the nanocomposites prepared via different blending sequences. However, the optimum results for all the properties studied were achieved when EVA was blended with organoclay first and SMR L was incorporated later into the blend. The optimum organoclay loading was achieved at 2 phr. Results from scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies showed that at 2 phr organoclay loading, nanostructures of individual silicate layers were achieved, whereas at 8 phr organoclay loading, agglomeration was observed. Flammability of the nanocomposites decreased when the organoclay loading increased.     

Comparison of Properties of Polypropylene (PP)/Virgin Acrylonitrile Butadiene Rubber (NBRv) and Polypropylene (PP)/Recycled Acrylonitrile Butadiene Rubber (NBRr) Blends

The comparison properties of polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr) blends and polypropylene/virgin acrylonitrile butadiene rubber (NBRv) blends were investigated. The tensile properties such as tensile strength, tensile modulus and elongation at break of PP/NBRv blends are higher than PP/NBRr blends. However, PP/NBRv blends exhibit lower stabilization torque and higher swelling percentage than PP/NBRr blends. Based on SEM, a finer morphology was observed in PP/NBRv blends in comparison with the PP/NBRr blends. The thermal stability of PP/NBRr is better than that of PP/NBRv blends.     

Curing Characteristics,Morphological, Tensile and Thermal Properties of Bentonite-Filled Ethylene-Propylene-Diene Monomer (EPDM) Composites

Bentonite (Bt) with irregular shape and surface morphology was used as a new type of filler in EPDM. EPDM/Bt composites were prepared using a laboratory size two-roll mill by adding 0 to 70 phr Bt. The effects of Bt loading on curing characteristics, morphology, tensile and thermal properties of EPDM/Bt composite were studied. Scorch and curing time were decreased with 0 to 30 phr loading and increased subsequently at 50 and 70 phr. Tensile strength and elongation at break (E_b) were increased with increasing Bt loading from 0 to 50 phr and decreased at 70 phr, whereas the tensile modulus (M100%) shows an increasing trend with increasing Bt loading. Thermogravimetric analysis shows the enhancements of thermal properties with increasing Bt loading. Morphological studies of tensile fracture surfaces of EPDM/Bt composite proves good interaction between Bt particles and EPDM at 50 phr and formation of Bt agglomerates at 70 phr.     

Chemistry of Substituted Quinolinones IV. Regioselective Nucleophilic Substitution of 1,3-Dichlorobenzo[f]quinoline

1,3-Dichlorobenzo[f]quinoline 2 was obtained from 1-hydroxybenzo[f]quinolin-3-one 1. Nucleophilic substitution, hydrolysis, hydrazinolysis and azidation reactions of compound 2 have been studied and found regioselective. Also, 1-aminobenzo[f]quinolinone 11 was obtained and used to prepare the benzoquinolinylthiourea derivative 12, naphthonaphthyridinedione 13, benzoquinolinylhydrazonoquinoline 15 and benzo[f]-quinolinyl enamine 17.     

Effect of Multifunctional Additive on Filler Dispersion in Carbon-Black- and Silica-Filled Natural Rubber Compounds

The effect of multifunctional additive (MFA) on filler dispersion in carbon-black- (CB) and silica-filled natural rubber (NR) compounds has been studied. Silica dispersion, measured by computer-aided image analysis and scanning electron microscopy (SEM), showed a substantial improvement when MFA concentration is increased from 1 to 3 phr. After this level, there is a further but small improvement. However, for CB-filled NR compounds, CB dispersion showed a substantial improvement when the MFA used between 0 and 1 phr. As in silica-Filled NR compounds, there is only a small improvement in dispersion after 1 phr.     

The Anti-Fasciolasis Properties of Silver Nanoparticles Produced by Trichoderma harzianum and Their Improvement of the Anti-Fasciolasis Drug Triclabendazole

Recently, new strains of Fasciola demonstrated drug resistance, which increased the need for new drugs or improvement of the present drugs. Nanotechnology is expected to open some new opportunities to fight and prevent diseases using an atomic scale tailoring of materials. The ability to uncover the structure and function of biosystems at the nanoscale, stimulates research leading to improvement in biology, biotechnology, medicine and healthcare. The size of nanomaterials is similar to that of most biological molecules and structures; therefore, nanomaterials can be useful for both in vivo and in vitro biomedical research and applications. Therefore, this work aimed to isolate fungal strains from Taif soil samples, which have the ability to synthesize silver nanoparticles. The fungus Trichoderma harzianum, when challenged with silver nitrate solution, accumulated silver nanoparticles (AgNBs) on the surface of its cell wall in 72 h. These nanoparticles, dislodged by ultrasonication, showed an absorption peak at 420 nm in a UV-visible spectrum, corresponding to the plasmon resonance of silver nanoparticles. The transmission electron micrographs of dislodged nanoparticles in aqueous solution showed the production of reasonably monodisperse silver nanoparticles (average particle size: 4.66 nm) by the fungus. The percentage of non hatching eggs treated with the Triclabendazole drug was 69.67%, while this percentage increased to 89.67% in combination with drug and AgNPs.     

One Step Synthesis of NiO Nanoparticles via Solid-State Thermal Decomposition at Low-Temperature of Novel Aqua(2,9-dimethyl-1,10-phenanthroline)NiCl2 Complex

[NiCl₂(C₁₄H₁₂N₂)(H₂O)] complex has been synthesized from nickel chloride hexahydrate (NiCl₂·6H₂O) and 2,9-dimethyl-1,10-phenanthroline (dmphen) as N,N-bidentate ligand. The synthesized complex was characterized by elemental analysis, infrared (IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and differential thermal/thermogravimetric analysis (TG/DTA). The complex was further confirmed by single crystal X-ray diffraction (XRD) as triclinic with space group P-1. The desired complex, subjected to thermal decomposition at low temperature of 400 ºC in an open atmosphere, revealed a novel and facile synthesis of pure NiO nanoparticles with uniform spherical particle; the structure of the NiO nanoparticles product was elucidated on the basis of Fourier transform infrared (FT-IR), UV-vis spectroscopy, TG/DTA, XRD, scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDXS) and transmission electron microscopy (TEM).     

Analysis of MTHFR and MTRR Gene Polymorphisms in Iranian Ventricular Septal Defect Subjects

Ventricular septal defect (VSD) is one of the most common types of congenital heart defects (CHD). There are vivid multifactorial causes for VSD in which both genetic and environmental risk factors are consequential in the development of CHD. Methionine synthase reductase (MTRR) and methylenetetrahydrofolate reductase (MTHFR) are two of the key regulatory enzymes involved in the metabolic pathway of homocysteine. Genes involved in homocysteine/folate metabolism may play an important role in CHDs. In this study; we determined the association of A66G and C524T polymorphisms of the MTRR gene and C677T polymorphism of the MTHFR gene in Iranian VSD subjects. A total of 123 children with VSDs and 125 healthy children were included in this study. Genomic DNA was extracted from the buccal cells of all the subjects. The restriction fragment length polymorphism polymerase chain reaction (PCR-RFLP) method was carried out to amplify the A66G and C524T polymorphism of MTRR and C677T polymorphism of MTHFR genes digested with Hinf1, Xho1 and Nde1 enzymes, respectively. The genotype frequencies of CC, CT and TT of MTRR gene among the studied cases were 43.1%, 40.7% and 16.3%, respectively, compared to 52.8%, 43.2% and 4.0%, respectively among the controls. For the MTRR A66G gene polymorphism, the genotypes frequencies of AA, AG and GG among the cases were 33.3%, 43.9% and 22.8%, respectively, while the frequencies were 49.6%, 42.4% and 8.0%, respectively, among control subjects. The frequencies for CC and CT genotypes of the MTHFR gene were 51.2% and 48.8%, respectively, in VSD patients compared to 56.8% and 43.2% respectively, in control subjects. Apart from MTHFR C677T polymorphism, significant differences were noticed (p < 0.05) in C524T and A66G polymorphisms of the MTRR gene between cases and control subjects.