Non-Hall-Petch hardness dependence in ultrafine fibrous MgAl2O4-MgO eutectic ceramics fabricated by the laser-heated floating zone (LFZ) method

MgAl₂O₄-MgO eutectic ceramics were fabricated by the laser-heated floating zone (LFZ) method with various growth rates to assess its possible beneficial effect on microstructural aspects and mechanical properties. It was determined that the growth rate optimizing the microstructure and mechanical properties is 750 mm/h; below this value, coarsening of the fibrous microstructure takes place with a degradation of these properties. In the extreme case of 50 mm/h growth rate, the presence of undesirable transverse cracks was unavoidable. Thanks to the high growth rate of 750 mm/h, ultra-fine fibrous microstructure MgAl₂O₄-MgO eutectic ceramics can thus be fabricated with greater hardness (15.5 GPa from Vickers indentation and 22 GPa from nanoindentation) and flexural strength (?345 MPa). It is reported that hardness scales with the interfiber spacing λ according to a law of the type lnλ/λ, contrary to the assumed Hall-Petch-like dependence. This proposed law can be explained in terms of dislocation hardening induced by the MgO fibers.     

Construction of Generalized Hybrid Trigonometric Bézier Surfaces with Shape Parameters and Their Applications

Journal of Mathematical Imaging and Vision - To tackle the problem of modeling and shape designing of complex engineering surfaces, the continuity constraints between generalized hybrid...     

Degradation of chlorinated polyethylene—III: Effect of additives on dehydrochlorination and oxygen absorption

Degradation of chlorinated polymers takes place via two simultaneous reactions; namely, dehydrochlorination and oxygen absorption. The dehydrochlorination and oxygen absorption of five grades of chlorinated polyenthylenes were studied at temperatures varying between 120 and 180°C. The chlorinated polyethylene grades varied in both molecular weight and chlorine content, the latter being in the range of 24.0 to 45.2 percent chlorine. Dehydrochlorination measurements on the pure polymers in both nitrogen and oxygen atmospheres showed that the rate of dehydrochlorination increases with an increase in the degree of chlorination of the polymer. The oxygen absorption rate, however, showed a decrease with higher chlorine content of the polymer. Dehydrochlorination and oxygen absorption studies were also carried out on chlorinated polyethylene containing dehydrochlorination stabilizers, antioxidants, antimony oxide, and other metal salts and metal oxides. Retardation of both oxygen absorption and dehydrochlorination was observed in the presence of antioxidants. More significant, however, was the observed action of some dehydrochlorination stabilizers as efficient antioxidants in the polymer.     

Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain

A four‐step synthetic strategy was applied to achieve novel methacrylic monomers. 5‐Norbornene‐2,2‐dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3‐diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing polymethacrylates, which were characterized by FTIR and ¹H‐NMR spectroscopy and differential scanning calorimetry and thermogravimetric thermal analysis. Gel permeation chromatography was performed to determine molecular weight averages and polydispersity. The polymethacrylate having naphthalenic nuclei was recognized to be the highest molecular weight polymer (M̄_n = 12144, η_inh = 0.80 dL/g) with the highest thermal stability. All the polymers showed good solubility in a variety of common organic solvents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 30–38, 2000     

Solution of Algebraic Lyapunov Equation on Positive-Definite Hermitian Matrices by Using Extended Hamiltonian Algorithm

This communique is opted to study the approximate solution of the Algebraic Lyapunov equation on the manifold of positive-definite Hermitian matrices. We choose the geodesic distance between -AHX - XA and P as the cost function, and put forward the Extended Hamiltonian algorithm (EHA) and Natural gradient algorithm (NGA) for the solution. Finally, several numerical experiments give you an idea about the effectiveness of the proposed algorithms. We also show the comparison between these two algorithms EHA and NGA. Obtained results are provided and analyzed graphically. We also conclude that the extended Hamiltonian algorithm has better convergence speed than the natural gradient algorithm, whereas the trajectory of the solution matrix is optimal in case of Natural gradient algorithm (NGA) as compared to Extended Hamiltonian Algorithm (EHA). The aim of this paper is to show that the Extended Hamiltonian algorithm (EHA) has superior convergence properties as compared to Natural gradient algorithm (NGA). Upto the best of author’s knowledge, no approximate solution of the Algebraic Lyapunov equation on the manifold of positive-definite Hermitian matrices is found so far in the literature.     

Oriented polycrystalline mesoporous CeO2 with enhanced pore integrity

Mesoporous CeO₂ particles are synthesized using a sol–gel method involving Pluronic P123 or F127 tri-block copolymer and cerium acetate hydrate. Transmission electron microscopy reveals well defined meso-channels of about 10 nm in diameter and a wall framework consisting of highly oriented polycrystalline CeO₂. The [0 0 1] axis of the crystals is found to be aligned parallel to the meso-channels, and lattice coherency of [1 0 0] or [0 1 0] also exists in perpendicular plane to the channel. A cooperative self-assembly of the tri-block copolymer and Ce⁴⁺ species is believed to occur, along with the precipitation of nano-crystalline CeO₂ in the sol–gel process. It is proposed that the preferential orientation may result from a favored linkage of the low-order Miller indices {0 0 1} planes of CeO₂ to the PEO segment in the PEO–PPO–PEO tri-block copolymer micelles. The unique structural characteristics of meso-CeO₂ appear to contribute to maintaining the pore integrity during the synthesis as well as in a post-fabrication in situ TEM heating test.     

Myth and reality of the hybrid desalination process

The paper discusses some misconceptions that have contributed to the continued use of thermal desalination processes and promotion of the hybrid desalination process for new plants being built or considered at Middle East locations. The misconceptions are examined both on the basis of fundamental thermodynamic principles and in terms of practical engineering parameters. The analysis shows that there is no economic or performance advantage in the installation of greenfield hybrid power/thermal desalination/ seawater reverse osmosis (SWRO) plants in preference to power/SWRO plants, because the latter would produce water more cheaply under all conditions and at all fuel costs, and would provide more operational flexibility than the former. The paper identifies situations where the hybrid desalination process can be fully justified: in existing power/desalination plants, where aging boilers and multistage flash (MSF) units need to be repaired or replaced, through retrofitting and repowering. In such situations, abandonment of the MSF process would result in a reduction in the power output of the plant. The paper refers to previous work which showed that the repowering of a typical existing power/desalination station with refurbishment/replacement of the MSF units, together with the addition of SWRO units, would result in a several-fold increase in the water and power output and a dramatic improvement in the fuel efficiency, without any additions to the existing seawater intake system. The paper emphasizes the importance of test stations/demonstration plants at existing power/desalination stations in the Middle East in order to obtain data and make improvements in the technology of higher temperature SWRO, with the feed obtained from the cooling water returning from the power plant condenser and the thermal desalination plant. The paper shows that the potential benefits would easily justify the investment in research and development required to validate this concept.     

Performance Model of a WIMAX 2.0 All-IP 4G System

4G is promising a wireless broadband with data rates up to 1Gbps. The two candidate technologies for 4G are the Advanced Long Term Evolution (Advanced LTE) which is based on the 3GPP standards and the WiMAX 2.0 based on the IEEE 802.16 family of standards. The common feature of both technologies is that they will provide All-IP connectivity with flexible bit rates and quality of service guarantees for multiple classes of services including voice, mainly using voice over IP, data and video services. Most of the performance studies of 4G technologies use highly complex and sophisticated simulations due to the multiple complexity factors in investigating 4G technologies such as All-IP flexible bit rates, adaptive coding and modulation as well as the multi-services provided. These factors usually make any modelling attempt very difficult. This paper presents a numerical/analytical model for a 4G WiMAX cell based on a multi-dimensional Continuous-Time Markov Chain (CTMC) model. Performance measures were derived for the key performance indicators such as throughput and average bit rate per cell and per service class. By assuming minimum acceptable bit rates for certain quality of service guarantees, we derived measures for blocking probabilities. The model has been formulated and solved using MOSEL-2 (Modelling Specification and Evaluation Language) which captures the key features of a 4G system that affect services at session/call level. The resuls obtained from the model using sample parameters show that, the model can provide very useful insight to system behavior and can give good first indication to the performance of such a complex system.