Optical properties and photovoltaic device applications of InSe films

Films were formed by alternately evaporating InSe and Selenium from separate evaporation sources onto glass substrates kept at temperatures below 150°C with subsequent thermal annealing.The effects of the additional selenium on the properties of the films were investigated by structural investigations and photoconductivity measurements. It is found from the results of the present measurements that compositional changes occur in the films with increasing selenium/InSe ratio and that single-phase films containing only InSe are obtained at a certain critical ratio.The refractive indices and absorption coefficients of amorphous and crystalline InSe films in the spectral range 0.6–2.5 μm are determined by spectrophotometric reflectance and transmittance measurements. The minimum optical energy gap obtained from measurements of the absorption spectrum for the crystalline films is close to the value for single crystals.A heterostructure diode using crystalline InSe films as “window layers” was prepared and the fundamental photovoltaic properties were investigated. An absolute quantum efficiency of about 18% is obtained in the wavelength range 1.1–1.25 μm.     

Pulsed field loss characteristics of the Japanese test coil for the large coil task

This paper describes some results of an analytical calculation and the measurements of a pulsed field loss on the Japanese LCT conductor. The conductor, whose aspect ratio is around 2.5, is wound edge wise to reduce the pulsed field loss. The Japanese LCT coil, with the conductor thus designed, was evaluated to have a pulsed field loss of about 19W. This includes the loss of the helium vessel under the normal LCT test with a pulsed field of 0 to 0.14T. In addition, the loss measurement has been carried out up to 25 T/s. Measured results on the relation between the loss of a single strand and that of a whole strand pack well supports the validity of the loss analysis which includes a newly arranged set of analytical equations.     

Prognostic predictor with multiple fuzzy neural models using expression profiles from DNA microarray for metastases of breast cancer

Gene expression profiling data from DNA microarray were analyzed using the fuzzy neural network (FNN) modeling method for predicting the distant metastases of breast cancer. The best model consisting of five genes was able to predict metastases of breast cancer with 94% accuracy. Furthermore, 100% accuracy was achieved by majoritarian decision using only 25 genes from five noninferior models which were constructed independently. From the constructed model, gene expression rules, which may cause distant metastases, were explicitly extracted and 60% of the metastases cases could be explained by this rule. The FNN modeling method described in this paper enables precise extraction of significant biological markers affecting prognosis without prior knowledge.     

Efficient construction of cDNA microarrays utilizing normalized cDNA libraries of Arabidopsis thaliana

We have demonstrated the utility of normalization for efficient cDNA microarray preparation using Arabidopsis as a model. Nonredundant cDNAs including 5722 species were efficiently collected from random 7914 expressed sequence tags (ESTs) in four normalized cDNA libraries. The prepared microarrays were successfully used to monitor gene expression. These methodologies should be applicable to the study of other species in plant biotechnology.     

Giant room-temperature magnetoresistance in single-crystal Fe/MgO/Fe magnetic tunnel junctions

The tunnel magnetoresistance (TMR) effect in magnetic tunnel junctions (MTJs) is the key to developing magnetoresistive random-access-memory (MRAM), magnetic sensors and novel programmable logic devices. Conventional MTJs with an amorphous aluminium oxide tunnel barrier, which have been extensively studied for device applications, exhibit a magnetoresistance ratio up to 70% at room temperature. This low magnetoresistance seriously limits the feasibility of spintronics devices. Here, we report a giant MR ratio up to 180% at room temperature in single-crystal Fe/MgO/Fe MTJs. The origin of this enormous TMR effect is coherent spin-polarized tunnelling, where the symmetry of electron wave functions plays an important role. Moreover, we observed that their tunnel magnetoresistance oscillates as a function of tunnel barrier thickness, indicating that coherency of wave functions is conserved across the tunnel barrier. The coherent TMR effect is a key to making spintronic devices with novel quantum-mechanical functions, and to developing gigabit-scale MRAM.     

Spectral interferometric microscope with tandem liquid-crystal Fabry-Perot interferometers for extension of the dynamic range in three-dimensional step-height measurement

The maximum measurable range of a spectral interference microscope depends on the coherence length of the light transmitted by its tunable spectral filter. To achieve a large range in step-height measurement we have developed a new tunable spectral filter that uses tandem liquid-crystal Fabry-Perot interferometers (LC-FPIs), which can simultaneously attain both a high spectral resolution and a large tuning range. Fringe visibility measurements were carried out, and it was found that the coherence length of the light transmitted through tandem LC-FPIs is two times larger than that transmitted through a single LC-FPI. Using this novel tunable spectral filter, we developed a new spectral interference microscope for the measurement of three-dimensional shapes of discontinuous objects. Experimental results of step-height measurements both with a single LC-FPI and with tandem LC-FPIs are presented for a combination of standard steel gauge block sets with 1-, 99-, and 100-microm steps. A large range (1-100 microm) of measurement with submicrometer resolution was achieved with tandem LC-FPIs that was not possible with our previous system in which a single LC-FPI was used.     

Pore structure of porous ceramics synthesized from water-based slurry by freeze-dry process

A unique porous ceramic with complex pore structure was synthesized by the freeze-dry process. A water-based ceramic slurry was frozen while controlling the growth direction of ice, and sublimation of the ice were generated by drying it at a reduced pressure. By sintering this green body, a porous ceramic with complex pore structure was obtained, where macroscopically aligned open pores exceeding 10 m in size contained minute pores of about 0.1 m in their internal walls. Wide control of the porosity was possible by changing the concentration of the starting slurry. The pore size distribution as well as the microstructure were substantially affected by the freezing and sintering temperatures. Optimization of the synthesis conditions was investigated in order to obtain the desired pore structure.     

Establishment of a simple method for measurement of chronic blood flow in uterine artery of pregnant cows

Blood flow to the gravid uterine horn of seven multiparous Holstein cows (mean +/- SD, BW = 625.5 +/- 82.4 kg; age = 4.7 +/- 1.7 yr; parity = 2.9 +/- 1.1 yr) was measured from d 225 of gestation to parturition using transit-time ultrasonic blood flow probes placed around the middle uterine artery. Surgery was conducted on d 215 of gestation. The cows were sedated with xylazine and local anesthesia (procaine or bupivacain hydrochloride) during surgery. The surgical operations were conducted at the flank of standing cows. A transit time ultrasonic flow probe ("S" series, diameter 12 or 14 mm, Transonic Systems Inc., Ithaca, NY) was fitted surgically around the uterine artery of each cow. Surgery was completed within 2 h of anesthesia, and the animals recovered rapidly following surgery. Uterine blood flow (UBF, L/min) was recorded at 10-s intervals for 1395 min; these values were averaged to determine UBF. Cows exhibited normal gestation lengths (279.1 +/- 7.4 d), gave birth to normal healthy calves (birth weight = 40.6 +/- 6.6 kg), and had no retained placentas. The UBF increased significantly (P < 0.01) from d 225 (6.67 +/- 2.47) to d 249 (8.23 +/- 2.89) of gestation, but the latter UBF was similar to that of d 266 (8.38 +/- 2.70). The increased UBF after d 225 indicates increased demand of nutrients of fetus with the progress of gestation. The range of mean UBF varied widely among individual cows from 4.1 L/min to 12.2 L/min. Our method is useful for chronic measurement of UBF in cows for nutritional or physiological studies and does not require sophisticated facilities or special surgical technique.     

Photoluminescence enhancement by isolating β-FeSi2 layers from defective layers

We have investigated an optimal annealing process in order to enhance 1.55 μm light emission from semiconducting β-FeSi₂ and found that two steps annealing at 600 °C and 800 °C is effective to its enhancement. Rutherford backscattering spectroscopy and SEM observations revealed that pronounced surface segregation of Fe atoms during annealing at 600 °C caused surface precipitate of β-FeSi₂. The enhancement of light emission is attributed spatial isolation of the surface β-FeSi₂ (light emitting layer) from damaged and defective layers with nonradiative recombination centers.     

A Gait Phase Measurement System Using Treadmill Motor Current

The article describes the development of a gait phase time-based split-belt treadmill measurement system. Conventional methods of measuring gait phase, such as the foot switch and force plate, require significant preparation and are costly. In this article, we propose a simple, cheap, and accurate gait phase measurement system that utilizes only the treadmill motor current value. Comparison of this algorithm with conventional methods reveals that the proposed algorithm is as accurate as the foot switch. Moreover, the proposed algorithm can estimate stance phase within a 0.2?s error of the measured value of the force plate in most cases (four out of five healthy subjects). This accuracy is higher than that of the foot switch which is widely used in the clinical field.