Effect of chromium aging on the structural and thermal properties of chromium polyacrylate

The effects of aging time of Cr(III) solutions on the structural, thermal, magnetic, and morphological properties of chromium polyacrylate complexes were studied. Chromium retention was found to increase with longer aging periods. IR spectra revealed the formation of polychelate structures with noticeable changes on aging. The interaction of multivalent, polynuclear Cr(III) species with the polymer backbone resulted in a decrease in thermal stability for the complexes prepared from olated chromium solutions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 490–493, 2005     

Preliminary Investigations On The Reactivity Of Ozone Considering Energy Supplied To Ozone Generators

A simplified engineering analysis developed by investigations of the energy levels and the data of ozone decomposition is presented. Experiments have been conducted by generating ozone from the same ozone generator by two ways and keeping the hydrodynamic conditions identical during ozonation. Ozonation conducted in various media such as gas, gas-liquid and gas-solid supports the assumptions of the presence of excited ozone species and variation in reactivity. The variation in reactivity linked with ozone generation shows an increase in the case of sawdust bleaching. The reactivity is the same for the removal of total organic carbon from water, and a higher ozone decomposition without significant reaction with methyl red solutions and coliform inactivation is observed.     

Harnessing the Melting Peculiarities of Ultra‐High Molecular Weight Polyethylene Fibers for the Processing of Compacted Fiber Composites

Summary: Compacted fiber composites offer unique properties due to their lack of an extraneous matrix. The conditions of processing ultra‐high molecular weight polyethylene (UHMWPE) fibers were simulated in a heated pressure cell. In situ X‐ray diffraction measurements were used to follow the relevant transitions and the changes in the degree of crystallinity during melting and crystallization. The results strongly support the suggestion that the hexagonal crystal phase, in which the chain conformation is extremely mobile on the segmental level, constitutes the physical basis of compaction technologies for processing UHMWPE fibers into a single‐polymer composite. This report suggests that using a pseudo‐phase diagram outlining the occurrence of different phases during slow heating and the degree of crystallinity can provide valuable insight into the technological parameters relevant for optimal processing conditions.

Degree of crystallinity as a function of pressure and temperature in a region relevant to compaction processes.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Thermal decomposition behavior of γ‐irradiated poly(vinyl acetate)/poly(methyl methacrylate) miscible blends

Miscible polymer blends based on various ratios of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) were prepared in film form by the solution casting technique using benzene as a common solvent. The thermal decomposition behavior of these blends and their individual homopolymers before and after γ‐irradiation at various doses (50–250 kGy) was investigated. The thermogravimetric analysis technique was utilized to determine the temperatures at which the maximum value of the rate of reaction (T_max) occurs and the kinetic parameters of the thermal decomposition. The rate of reaction curves of the individual homopolymers or their blends before or after γ‐ irradiation displayed similar trends in which the T_max corresponding to all polymers was found to exist in the same position but with different values. These findings and the visual observations of the blend solutions and the transparency of the films gave support to the complete miscibility of these blends. Three transitions were observed along the reaction rate versus temperature curves; the first was around 100–200°C with no defined T_max, which may arise from the evaporation of the solvent. The second T_max was in the 340–380°C range, which depended on the polymer blend and the γ‐irradiation condition. A third transition was seen in the rate of reaction curves only for pure PVAc and its blends with PMMA with ratios up to 50%, regardless of γ‐ irradiation. We concluded that γ‐irradiation improved the thermal stability of PVAc/PMMA blends, even though the PMMA polymer was degradable by γ irradiation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1773–1780, 2006     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

Contraction stress build‐up of anisotropic conductive films (ACFs) for flip‐chip interconnection: Effect of thermal and mechanical properties of ACFs

The important mechanical mechanism for the electrical conduction of anisotropic conductive films (ACFs) is the joint clamping force after the curing and cooling processes of ACFs. In this study, the mechanism of shrinkage and contraction stress and the relationship between these mechanisms and the thermomechanical properties of ACFs were investigated in detail. Both thickness shrinkages and modulus changes of four kinds of ACFs with different thermomechanical properties were experimentally investigated with thermomechanical and dynamic mechanical analysis. Based on the incremental approach to linear elasticity, contraction stresses of ACFs developed along the thickness direction were estimated. Contraction stresses in ACFs were found to be significantly developed by the cooling process from the glass‐transition temperature to room temperature. Moreover, electrical characteristics of ACF contact during the cooling process indicate that the electrical conduction of ACF joint is robustly maintained by substantial contraction stress below T_g. The increasing rate of contraction stresses below T_g was strongly dependent on both thermal expansion coefficient (CTE) and elastic modulus (E) of ACFs. A linear relationship between the experimental increasing rate and E × CTE reveals that the build‐up behavior of contraction stress is closely correlated with the ACF material properties: thermal expansion coefficient, glassy modulus, and T_g. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2634–2641, 2004     

Surface‐initiated atom transfer radical polymerization from Mg(OH)2 nanoparticles to prepare the well‐defined polymer‐Mg(OH)2 nanocomposites

Well‐defined polymer‐Mg(OH)₂ nanocomposites were prepared by atom transfer radical polymerization (ATRP). The ATRP initiators were covalently attached to the Mg(OH)₂ by esterification of 2‐chloropropionyl chloride with hydroxyl group. The amount of polymer grafted from Mg(OH)₂ can be controlled using a different catalyst system and adding a small amount of polar solvent. The well‐defined diblock copolymer, consisting of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) were synthesized. The products were characterized by nuclear magnetic resonance, Fourier transform infrared, differential scanning calorimetry, and thermal gravimetric analysis. The morphologies of PS/PMMA and PS/PMMA/Mg(OH)₂‐g‐PS‐b‐PMMA blends are compared by using a scanning electron microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3680–3687, 2007     

Electrolytical fission at mercury cathodes of an NO single bond in ethers derived from 1-hydroxybenzo(d)-1,2,3-triazoles

The single NO bond in various ethers derived from 1-hydroxybenzo(d)-1,2,3-triazoles is reduced at mercury cathodes in a 2-electron process giving rise to the non-substituted benzotriazole and a corresponding primary alcohol. Controlled-potential electrolysis actually resulted in isolating the products of the above type eg benzotriazole and 2-piperidinoethanol. Cathodic reduction of non-substituted benzotriazole in acid media proceeds evidently via a chemical reaction between benzotriazole and hydrogen obtained by the catalytic reduction of hydrogen ions at the mercury electrode.     

Synthesis of deuterated cyclopropene fatty esters structurally related to palmitic and myristic acids

To develop a synthesis of tritiated cyclopropene fatty acids (CPFA), compounds that should prove useful for affinity labeling of desaturases in insect pheromone biosynthetic studies, a series of novel, selectively deuterated CPFA analogues was prepared and characterized. In methyl [16-²H]12,13-methylene-12-hexadecenoate, the incorporation of deuterium was achieved by treatment of the corresponding ω-chloro derivative with sodium borodeuteride in dimethylsulfoxide at 70°C for 24 h (67% yield) following conventional procedures. Alkylation of the tetrahydropyranyl derivative of 13-tridecynol in the presence of lithium diisopropylamide in tetrahydrofuran at −20°C with 1-chloro-3-iodopropane in hexamethylphosphoramide, followed by Jones oxidation of the crude product, yielded 16-chloro-12-hexadecynoic acid (54%), which was esterified to the corresponding methyl ester by treatment with potassium carbonate and methyl iodide in dimethylformamide. Treatment of this acetylenic ester with ethyldiazoacetate in the presence of activated copper-bronze as catalyst followed by hydrolysis in KOH solution at room temperature yielded 16-chloro-12,13-(carboxymethylene)-12-hexadecenoic acid. This diacid was treated with excess oxalyl chloride to give the corresponding diacyl chloride, which was decarbonylated in a diethyl ether solution with zinc chloride, and the cyclopropenium ions thus formed were added at −40°C to a methanolic sodium hydroxide solution of sodium borohydride to give methyl 16-chloro-12,13-methylene-12-hexadecenoate. Analogous procedures were followed to prepare methyl [17-²H]10,11-methylene-10-hexadecenoate, methyl [17-²H]11,12-methylene-11-hexadecenoate and methyl [17-²H]12,13-methylene-12-hexadecenoate from the corresponding diacids using sodium borodeuteride in the reduction of the cyclopropenium ions. Alternatively, methyl [2,2,3,3-²H₄]hexadecynoate, prepared by reaction of methyl 2,11-hexadecadiynoate with magnesium in deuterated methanol at room temperature, was submitted to the above cyclopropenylation and reductive decarbonylation sequence to give methyl [2,2,3,3,17-²H₅]-11,12-methylene-11-hexadecenoate. In summary, complementary methods for the selective incorporation of one to five deuterium atoms into cyclopropene fatty acids, at different sites, in moderate to high yields have been developed. The methods should easily be applicable to the preparation of the corresponding tritiated analogues.