The dissolution of activated titanium slag in dilute sulfuric acid

Finely ground titanium slag (–400 mesh) dissolves slowly in dilute H₂SO₄ (2–10 mol/L) in the temperature range 70–110°C, but attrition ground slag dissolves much faster under similar conditions. The process is strongly dependent on the speed of agitation in the region 345–1035 rpm, and has an activation energy of 28 kJ/mole TiO₂, thus suggesting that the dissolution is controlled by diffusion through the boundary layer.     

Bistable hybrids in sol–gel technology for switching devices

Development of memories based on organic soft materials is a current industrial niche aimed at the upper contacts flash memories. The electrical bistability of such materials makes them ideal candidates for cost-effective, fast-programming switching devices. Hybrid thin films of SiO₂ with Rose Bengal (bis-triethylammonium) dopant are here reported for the first time, together with their characterisations. Technology-wise the main advantage of the films is the possibility to cast photolithographically, which is also cost-effective. The physical and chemical stability of the films yields reproducible devices, from both the microtechnological and electrical point of view.     

Determination of compounding formulation of cured rubber by reverse engineering

The present work deals with reverse engineering on four rubber formulations. Information about the material composition of the compounding formulations was obtained by using techniques such as acetone extract, thermogravimetric analysis, energy dispersive X‐ray fluorescence studies, and Fourier transform infrared (FTIR) spectroscopy in attenuated total reflection mode. The reverse engineered formulations were compared on a qualitative and quantitative basis with the initial formulations. The aim was to ascertain the validity of the methodology, which may be used as reverse engineering of rubber compounds to quantitatively analyze unknown ground tire rubber in future. The state of the art was based on a fractional mass transfer from acetone extract to the rubbers detected in TGA. Through this new approach, the formulations calculated were very consistent with the formulations employed, thus establishing the validity of the methodology used. POLYM. ENG. SCI., 55:1450–1458, 2015. © 2015 Society of Plastics Engineers     

An adsorptive transfer technique coupled with brdicka reaction to reveal the importance of metallothionein in chemotherapy with platinum based cytostatics

The drugs based on platinum metals represent one of the oldest, but also one of the most effective groups of chemotherapeutic agents. Thanks to many clinical studies it is known that resistance of tumor cells to drugs is a frequent cause of chemotherapy failure. With regard to platinum based drugs, multidrug resistance can also be connected with increased expression of low-molecular weight protein metallothionein (MT). This study aimed at investigating the interactions of MT with cisplatin or carboplatin, using the adsorptive transfer technique coupled with differential pulse voltammetry Brdicka reaction (AdTS DPV Brdicka reaction), and a comparison of in vitro results with results obtained in vivo. The results obtained from the in vitro study show a strong affinity between platinum based drugs and MT. Further, we analyzed extracts of neuroblastoma cell lines treated with cisplatin or carboplatin. It is clear that neuroblastoma UKF-NB-4 cisplatin-resistant and cisplatin-sensitive cell lines unlikely respond to the presence of the platinum-based cytostatics cisplatin and carboplatin. Finally, we determined the level of MT in samples from rabbits treated with carboplatin and patients with retinoblastoma treated with the same drug.     

Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition

The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloroacetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 μA to 48 mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia.     

Erythropoietin Modulates Autophagy Signaling in the Developing Rat Brain in an In Vivo Model of Oxygen-Toxicity

Autophagy is a self-degradative process that involves turnover and recycling of cytoplasmic components in healthy and diseased tissue. Autophagy has been shown to be protective at the early stages of programmed cell death but it can also promote apoptosis under certain conditions. Earlier we demonstrated that oxygen contributes to the pathogenesis of neonatal brain damage, which can be ameliorated by intervention with recombinant human erythropoietin (rhEpo). Extrinsic- and intrinsic apoptotic pathways are involved in oxygen induced neurotoxicity but the role of autophagy in this model is unclear. We analyzed the expression of autophagy activity markers in the immature rodent brain after exposure to elevated oxygen concentrations. We observed a hyperoxia-exposure dependent regulation of autophagy-related gene (Atg) proteins Atg3, 5, 12, Beclin-1, microtubule-associated protein 1 light chain 3 (LC3), LC3A-II, and LC3B-II which are all key autophagy activity proteins. Interestingly, a single injection with rhEpo at the onset of hyperoxia counteracted these oxygen-mediated effects. Our results indicate that rhEpo generates its protective effect by modifying the key autophagy activity proteins.     

Biohydrometallurgical/UV production of ferrous sulphate heptahydrate crystals from pyrite present in coal tailings

The objective of this work was to develop a biohydrometallurgical/UV radiation route to produce ferrous sulphate heptahydrate (melanterite) from the pyrite present in coal tailings. The experimental work was carried out with a pyrite concentrate obtained from gravimetric processing of coal tailing. At laboratory scale it was performed the oxidation of pyrite in an aqueous medium in packed bed leaching columns in an oxidising environment with the presence of acidophilic bacteria (Acidithiobacillus ferrooxidans). The recirculation of the liquor allowed obtaining an iron-rich extract. The conversion of Fe³⁺ to Fe²⁺ was performed using ultraviolet irradiation (UV). Finally, the solution was evaporated allowing the formation of iron sulphate crystals. The results demonstrated that it is possible to produce high purity ferrous sulphate heptahydrate crystals using coal tailings as raw material.     

Inverse microemulsion copolymerization of butyl acrylate and acrylamide: kinetics,colloidal parameters and some model applications

The inverse microemulsion copolymerization of acrylamide and butyl acrylate initiated by ammonium peroxodisulphate, a water‐soluble initiator, and stabilized by anionic emulsifiers sodium bis‐2‐ethylhexylsulfosuccinate and sodium dodecylsulphate (SDS) has been studied. An increase of SDS concentration was observed to increase both the rate of polymerization and the particle size. The average number of radicals per particle (n?) is much below 0.5, which indicates desorption of monomeric radicals from polymer particles. The exit (desorption) rate constants k′_des (cm² s^?1) and k_des (s^?1) were evaluated as a function of SDS concentration (or the particle size) according to the Ugelstad/O'Toole (I), Nomura (II) and Gilbert (III) models. The value of k_des (s^?1) decreases with increasing particle size (or SDS concentration) for all three (I, II and III) models. A complex trend appears for k′_des (cm² s^?1): the Ugelstad/O'Toole model estimates a decrease, the Nomura model finds no variation and the Gilbert model estimates even a slight increase in k′_des with increasing SDS concentration. Copyright © 2006 Society of Chemical Industry     

Preparation and characterization of poly(vinyl alcohol)‐poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications

Aqueous solutions of poly(vinyl alcohol) and poly(vinyl pyrrolidone) are blended and films are produced by casting method with the further intention of being used as bio‐materials with latent medical application. Glutaraldehyde, 4,4′‐diazido‐2,2′‐stilbenedisulfonic acid disodium salt tetra‐hydrate are used as crosslinker agents, whereas lactic acid is the plasticizer in the blend. The obtained films are characterized by differential scanning calorimetry (DSC), mechanical properties, swelling and solubility behavior. DSC measurements show that the blends exhibit a single glass transition temperature indicating that they are miscible, even in the presence of the plasticizer and crosslinker agents. By the combination of all mentioned additives, a relevant enhancement of the swelling is observed, accompanied by a stabilization of the solubility during the tested time. Finally, mechanical properties show an appropriate performance in the studied parameters. As a consequence, the obtained films could be suitable for use as medium or long‐term implants. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013