Toward Demystifying the Mohs Hardness Scale

Today, the Mohs scale is used profusely throughout educational systems without any persuasive understanding of the fundamental principles. Why one mineral has a scratch hardness over the next culminating in a scale of 1 (chalk) to 10 (diamond) has no atomistic or structure‐sensitive basis that explains this outcome. With modern computationally based atomistic and multiscale models, there is increasing promise of defining the pressure and rate‐dependent parameters that will allow a fundamental understanding of the Mohs scale. This study principally addresses the combined fracture and plasticity parameters that qualitatively affect fracture at the nanoscale. A physical model wherein the crack tip under a scratch is shielded by dislocations is supported by molecular dynamics (MD) simulations in both ductile aluminum and brittle silicon carbide. Next, this model is applied to nanoindentation data from the literature to produce a ranking of Mohs minerals based on their fundamental properties. As such, what is presented here is a first step to address the flow and fracture parameters ultimately required to provide a figure of merit for scratch hardness and thus the Mohs scale.     

Microstructure and properties of friction stir welded aluminium alloys

Aluminium alloy 7136 belongs to the Al–Zn–Mg–Cu group of aluminium alloys strengthened by precipitation. These alloys offer very good properties, i.e. high strength combined with good corrosion resistance, which makes them suitable for aerospace applications. The limited range of applications of these alloys is due to problems associated with their welding. The Al–Zn–Mg–Cu alloys are classified as non-weldable. The aim of this study was to determine the quality and properties of friction stir welded (FSW) joints of alloy 7136-T76. This article presents the results of a detailed study into the microstructure and mechanical properties of FSW welds. The paper demonstrates that the FSW method is suitable for joining Al–Zn–Mg–Cu alloys. The FSW joints are of good quality and high mechanical properties. Tests of joints created at various tool rotation speeds have shown that joints of suitable quality, in terms of microstructure and properties, can be obtained for a relatively wide range of process parameters. The tool rotation speeds applied during the welding process did not have a significant influence on the quality of the welds.     

The WWOX/HIF1A Axis Downregulation Alters Glucose Metabolism and Predispose to Metabolic Disorders

Recent reports indicate that the hypoxia-induced factor (HIF1α) and the Warburg effect play an initiating role in glucotoxicity, which underlies disorders in metabolic diseases. WWOX has been identified as a HIF1α regulator. WWOX downregulation leads to an increased expression of HIF1α target genes encoding glucose transporters and glycolysis’ enzymes. It has been proven in the normoglycemic mice cells and in gestational diabetes patients. The aim of the study was to determine WWOX’s role in glucose metabolism regulation in hyperglycemia and hypoxia to confirm its importance in the development of metabolic disorders. For this purpose, the WWOX gene was silenced in human normal fibroblasts, and then cells were cultured under different sugar and oxygen levels. Thereafter, it was investigated how WWOX silencing alters the genes and proteins expression profile of glucose transporters and glycolysis pathway enzymes, and their activity. In normoxia normoglycemia, higher glycolysis genes expression, their activity, and the lactate concentration were observed in WWOX KO fibroblasts in comparison to control cells. In normoxia hyperglycemia, it was observed a decrease of insulin-dependent glucose uptake and a further increase of lactate. It likely intensifies hyperglycemia condition, which deepen the glucose toxic effect. Then, in hypoxia hyperglycemia, WWOX KO caused weaker glucose uptake and elevated lactate production. In conclusion, the WWOX/HIF1A axis downregulation alters glucose metabolism and probably predispose to metabolic disorders.     

FEM modeling of structures based on close range digital photogrammetry

The aim of this paper is to present a methodology for the evaluation of historic timber structures, based on numerical modeling coupled with on site measurements. A method to measure the geometry of structural elements of a timber roof using a photogrammetric modeling procedure is described. In particular, we show the utility of photogrammetric based models when applied to structural analysis by directly introducing 3D geometry files in the preprocessing module of computational software based on the Finite Element Method. The 2D and 3D FEM models of the roof are considered to compare the simple and more complex modeling, and static and dynamic analyses are performed. Both models are prepared using the photogrammetric data.     

The role of niobium in MCM-41 supported with Pt and Au—A comparative study of physicochemical and catalytic properties

This paper reviews a series of results, partly published recently, on niobosilicate mesoporous molecular sieves of MCM-41 type modified with noble metals (Pt, Au). Platinum is introduced to MCM-41 by impregnation technique, whereas gold is incorporated by two methods: during the synthesis by co-precipitation (COP) and by impregnation (IMP). Three fundamental features of the prepared materials have been considered: (i) texture/structure, (ii) noble metal state and dispersion, and (iii) catalytic activity. The latter has been tested in selective reduction of NO by propene, methanol oxidation and WGS process. The role of niobium, as well as the effect of the nature of noble metals and the preparation method on the physicochemical and catalytic properties of the final materials based on NbMCM-41 (in comparison with siliceous MCM-41) is demonstrated.     

Fabrication of switchable liquid crystal devices using surface relief gratings in photopolymer

Holographically recorded surface relief gratings in dry, self-developing acrylamide based photopolymer were used to fabricate two types of switchable liquid crystal (LC) device. One is an electrically switchable LC diffraction grating and the other is an electrically switchable polarization rotator. The electrically switchable diffraction grating was characterized by measuring the dependence of the intensity in the first diffracted order on the applied electric field. The polarization rotator was characterized by studying the influence of the applied electric field on the twist angle and the variation of intensity in the zero and the first orders of diffraction.     

Dislocation controlled wear in single crystal silicon carbide

For better design and durability of nanoscale devices, it is important to understand deformation in small volumes and in particular how deformation mechanisms can be related to frictional response of an interface in the regime where plasticity is fully developed. Here, we show that when the size of the cutting tool is decreased to the nanometer dimensions, silicon carbide wears in a ductile manner by means of dislocation plasticity. We present different categories of dislocation activity observed for single asperity sliding on SiC as a function of depth of cut and for different sliding directions. For low dislocation density, plastic contribution to frictional energy dissipation is shown to be due to glide of individual dislocations. For high dislocation densities, we present an analytical model to relate shear strength of the sliding interface to subsurface dislocation density. Furthermore, it is shown that a transition from plowing to cutting occurs as function of depth of cut and this transition can be well described by a macroscopic geometry-based model for wear transition.     

The Effect of Hypoxia on the Expression of CXC Chemokines and CXC Chemokine Receptors—A Review of Literature

Hypoxia is an integral component of the tumor microenvironment. Either as chronic or cycling hypoxia, it exerts a similar effect on cancer processes by activating hypoxia-inducible factor-1 (HIF-1) and nuclear factor (NF-κB), with cycling hypoxia showing a stronger proinflammatory influence. One of the systems affected by hypoxia is the CXC chemokine system. This paper reviews all available information on hypoxia-induced changes in the expression of all CXC chemokines (CXCL1, CXCL2, CXCL3, CXCL4, CXCL5, CXCL6, CXCL7, CXCL8 (IL-8), CXCL9, CXCL10, CXCL11, CXCL12 (SDF-1), CXCL13, CXCL14, CXCL15, CXCL16, CXCL17) as well as CXC chemokine receptors—CXCR1, CXCR2, CXCR3, CXCR4, CXCR5, CXCR6, CXCR7 and CXCR8. First, we present basic information on the effect of these chemoattractant cytokines on cancer processes. We then discuss the effect of hypoxia-induced changes on CXC chemokine expression on the angiogenesis, lymphangiogenesis and recruitment of various cells to the tumor niche, including myeloid-derived suppressor cells (MDSCs), tumor-associated macrophages (TAMs), tumor-associated neutrophils (TANs), regulatory T cells (T_regs) and tumor-infiltrating lymphocytes (TILs). Finally, the review summarizes data on the use of drugs targeting the CXC chemokine system in cancer therapies.     

Inhibitors of Cyclin-Dependent Kinases: Types and Their Mechanism of Action

Recent studies on cyclin-dependent kinase (CDK) inhibitors have revealed that small molecule drugs have become very attractive for the treatment of cancer and neurodegenerative disorders. Most CDK inhibitors have been developed to target the ATP binding pocket. However, CDK kinases possess a very similar catalytic domain and three-dimensional structure. These features make it difficult to achieve required selectivity. Therefore, inhibitors which bind outside the ATP binding site present a great interest in the biomedical field, both from the fundamental point of view and for the wide range of their potential applications. This review tries to explain whether the ATP competitive inhibitors are still an option for future research, and highlights alternative approaches to discover more selective and potent small molecule inhibitors.