Fast search techniques for use in vector quantisation and related pattern matching applications

Two techniques for the design and fast search of a vector quantiser codebook are proposed. These classify speech data vectors according to (i) the sign and (ii) the slope between successive samples. With both techniques the performance obtained is superior to that obtained from a conventional gain/shape vector quantiser and comparable to that of a full search vector quantiser. A major attraction of both approaches is that they significantly reduce the number of computations required for the codebook search.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

Oxygen glow discharge experiment to remove deposited layers and to release trapped hydrogen isotopes in HT-7 superconducting tokamak

An experiment to remove re-deposited layers and to release hydrogen using a glow discharge in oxygen (O-GDC) has been performed in the HT-7 superconducting tokamak. In the absence of magnetic fields, the O-GDC wall conditioning had produced rapid, controlled co-deposit removal. Average removal rates, 5.2 × 10²² H-atoms/h, 5.65 × 10²¹ D-atoms/h and 5.53 × 10²² C-atoms/h, respectively, were obtained during 145 min O-GDC experiment in the pressure range 0.5-1.5 Pa. The corresponding removal rate of co-deposited films was ∼1.19 μm/day (26.5 g/day for carbon) based on an area of 12 m². Compared to thermo-oxidation and O-ICR experiment, high pressure O-GDC wall conditioning promoted the oxidation and improved the C and D atoms removal. In the O-GDC experiment, the removal rates of H-atoms and D-atoms as H₂O, HDO and D₂O were higher than that of H₂ and D₂ by factors of about 20 and 50, respectively. During the 145 min O-GDC experiment, about 14.5% O-atoms were converted into carbon oxides and hydroxides, and about 5.37 × 10²² O-atoms were adsorbed on the walls corresponding to a coverage of 4.5 × 10²¹ O/m² on an wall area of 12 m². In a 100 min helium glow discharge (He-GDC) following the O-GDC experiment, 1.53 × 10²² O-atoms, about 28.5% oxygen retained on the walls, were removed. The removal rate of H-atoms in He-GDC cleaning after O-GDC experiment was lower than that in He-GDC cleaning before O-GDC experiment, which indicates that the O-GDC wall conditioning had effectively reduced hydrogen retention on the walls.     

Bilateral control of teleoperators with time delay

A control law for teleoperators is presented which overcomes the instability caused by time delay. By using passivity and scattering theory, a criterion is developed which shows why existing bilateral control systems are unstable for certain environments, and why the proposed bilateral control law is stable for any environment and any time delay. The control law has been implemented on a single-axis force-reflecting hand controller, and preliminary results are shown. To keep the presentation clear, a single-degree-of-freedom (DOF) linear time-invariant (LTI) teleoperator system is discussed. Nevertheless, results can be extended, without loss of generality, to an n-DOF nonlinear teleoperation system     

GaAs/AlGaAs grating surface-emitting diode lasers on Si substrates

A monolithic grating surface-emitting, GaAs/AlGaAs, separate-confinement-heterostructure, single-quantum-well diode laser has been fabricated on a Si substrate using a single-step metalorganic chemical vapour deposition process. An output power of 30 mW has been obtained under pulsed operation with a peak emission wavelength of 885 nm.<>     

Fast location of high-order modes for boxed microstrip with finite strip thickness

Many analyses of boxed microstrip discontinuities require the location of large numbers of high-order modes. Using Sturm-Liouville theory, this letter derives a relationship between microstrip modes and slab-loaded guide modes, leading to an efficient mode location algorithm for microstrip, including microstrip with finite strip thickness.<>