Characterization of titanium alloy implant surfaces with improved dissolution resistance

The present work sets out to investigate the structure and chemistry of surface treated oxides (either aged in boiling water or air-heated) with improved dissolution resistance compared to conventionally passivated surfaces. X-ray photoelectron spectroscopy (XPS) has demonstrated a significant reduction in oxidized aluminium associated with an ageing-based surface treatment. Angle-dependent XPS has revealed an increase in amphoteric-OH surface sites for the thermal treatments. Atomic force microscopy (AFM) investigation suggests that these sites play a role in the improved proteinadsorption properties of these surfaces. These observations form the basis of a model which describes the influence of surface oxide on the kinetics of metal ion dissolution.     

Sterilization of heparinized Cuprophan hemodialysis membranes

The effects of sterilization of dry heparinized Cuprophan hemodialysis membranes by means of ethylene oxide (EtO) exposure, gamma irradiation, or steam on the anticoagulant activity and chemical characteristics of immobilized heparin and the permeability of the membrane were investigated. Sterilization did not result in a release of heparin or heparin fragments from heparinized Cuprophan. Sterilization of heparinized Cuprophan by means of EtO exposure and gamma irradiation induced a slight, insignificant decrease of the anticoagulant activity. In contrast, steam-sterilized heparinized Cuprophan showed a higher anticoagulant activity than unsterilized heparinized Cuprophan, which was most likely caused by cleavage of some of the covalent bonds between heparin and Cupropha. The effects of sterilization on the permeability of unmodified Cuprophan and heparinized Cuprophan were compared. The permeability of unmodified Cuprophan for vitamin B₁₂ (Vit B₁₂) and sulfobromophthalein (SBP) was reduced by 20–35% after EtO exposure and gamma irradiation and was reduced by 90–95% after steam sterilization. The water permeability of unmodified Cuprophan remained the same after EtO exposure and gamma irradiation but also dramatically reduced after steam sterilization. These reductions were ascribed to the collapse of pores of the membrane. The permeability of heparinized Cuprophan was not affected by EtO exposure and gamma irradiation but dramatically reduced after steam sterilization, although to a lesser extent than in the case of unmodified Cuprophan. Apparently, the presence of immobilized heparin (partially) prevented the collapse of pores during sterilization. Gamma irradiation was recommended as the preferred method of sterilization for heparinized Cuprophan.     

Reconstitution of CD3 zeta coupling to calcium mobilization via genetic complementation

The integrity of the T cell receptor complex (CD3-TCR) transduction machinery is central to T cell development and to T cell effector function. Molecular dissection of the multimeric CD3-TCR complex revealed that at least two associated polypeptides, CD3 zeta and CD3 epsilon, autonomously couple antigenic recognition event to early and late events of the intracytoplasmic activation cascade. A 18-amino acid motif based on a tandem YXXL stretch, the activation receptor homology sequence 1 (ARH-1) motif, is necessary and sufficient to the transducing properties of both CD3 zeta and CD3 epsilon. Stimulation of chimeric molecules made of ecto- and transmembrane domains of various cell surface proteins and intracytoplasmic domains of CD3 epsilon or CD3 zeta leads to an increase in the intracellular Ca2+ concentration ([Ca2+]i) in Jurkat cells. We describe here that a similar CD25/zeta chimeric molecule was unable to induce a detectable [Ca2+]i rise upon CD25 cross-linking once expressed in the murine thymoma BW-. A Ca2+ influx could, however, be triggered in BW- cells by thapsigargin, i.e. following depletion of Ca2+ stores. Somatic cell hybrids made from BW- and either thymocytes or mature lymph node T cells reconstituted the coupling of CD3 zeta to the Ca2+ signal via an ARH-1 motif-dependent pathway. However, pervanadate-induced Ca2+ mobilization, a phenomenon attributed to tyrosine phosphorylation, was impaired in BW-cells and reconstituted in hybridomas. In contrast to the Ca2+ response, IL-2 production was induced in both BW- and hybrids cells, which questions the functional relevance of [Ca2+]i augmentation in T cell activation. In conclusion, the properties of the BW- thymoma, which define a novel group of CD3 zeta transduction cell mutants, as well as its complementation by somatic cell fusion demonstrate that this cell line represents a useful model to dissect the signaling pathway that couples CD3 zeta to Ca2+ mobilization by genetic reconstitution.     

INSTRUMENTATION FOR FLOW PROPERTIES OF GAS-SOLID SUSPENSIONS AND RECENT ADVANCES

Measurements of local velocity, density, and mass flow of phases of a gas-solid suspension are needed in determining transport properties, validating theoretical predictions, and formulating design procedures. Most of the available instruments are based on time averages or fluctuations with time. Primary standard for direct measurement of density of a phase such as solid particles is being developed. A laser phase Doppler device, within certain restrictions, may give local instantaneous density, while other optical methods and neutron beam remain secondary standards based on mass flow calibrations. An overall review including recent results has been made on both intrusive and non-intrusive instruments; their limitations and future possibilities are outlined and discussed. The limitations of the traditional approach utilizing the triangular relation between local averages of mass flow, velocity, and density of particles for the determination of flow properties, and higher order correlations are demonstrated.     

Personal communications networks bridging the gap between cellularand cordless phones

Today's cellular radiotelephone systems currently serve some 12 million subscribers but at average costs of $70/month for service, cellular remains a business, not a consumer, service. On the other hand, cordless phones are already a consumer product in over 40% of US households and annual sales of new cordless phones are already greater than sales of regular corded phones. Personal Communications Networks (PCN) providing Personal Communications Services (PCS) are designed to bridge the gap between expensive public cellular and private cordless services. In this paper we explore PCN/PCS topics including: a definition of the service, identification of the underlying technologies, and discussion of tradeoffs between the technologies     

Optimal discrimination and classification of neuronal actionpotential waveforms from multiunit, multichannel recordings usingsoftware-based linear filters

Describes advanced protocols for the discrimination and classification of neuronal spike waveforms within multichannel electrophysiological recordings. The programs are capable of detecting and classifying the spikes from multiple, simultaneously active neurons, even in situations where there is a high degree of spike waveform superposition on the recording channels. The protocols are based on the derivation of an optimal linear filter for each individual neuron. Each filter is tuned to selectively respond to the spike waveform generated by the corresponding neuron, and to attenuate noise and the spike waveforms from all other neurons. The protocol is essentially an extension of earlier work (S. Andreassen et al., 1979; W.M. Roberts and D.K. Hartline, 1975; R.B. Stein et al., 1979). However, the protocols extend the power and utility of the original implementations in two significant respects. First, a general single-pass automatic template estimation algorithm was derived and implemented. Second, the filters were implemented within a software environment providing a greatly enhanced functional organization and user interface. The utility of the analysis approach was demonstrated on samples of multiunit electrophysiological recordings from the cricket abdominal nerve cord     

Stress function with finite magnitude of stress concentration around an interface crack

A new mathematical model for study of an interface crack between two dissimilar elastic half planes is proposed. A process zone is formed along the interface between the physical crack and the continuous part. Both the crack opening (and sliding) displacement with a smooth shape and the finite magnitude of stress concentration appear in this zone. The analytical model is expressed by closed elastic solutions using complex variables, but with no oscillations at the crack tip.     

Mass customization of medical devices and implants: state of the art and future directions

The medical field is one in which the need for customization can be clear cut, as providing tailored devices and implants for unique physiologies can provide for a better overall treatment than the use of 'off the shelf' devices and implants. Customization in the production of medical products can be roughly divided into consideration of medical devices, and of implantable parts or systems. The present paper outlines the current state of the art in both of these areas, presents details of projects that are ongoing at the University of Leeds and outlines future research directions.